Zfs error

R

Roberto924

New Member
May 23, 2019
5
0
1
40
Hi friends, i have a dell poweredge r540 server with 2 disks 1tb ssd and a 2tb dell hard drive hot plug disk
The ssd disk has proxmox and 2 vm created(centos and freenas)
The second hd 2tb was a zfs volume
Asociated to freenas storage.
My boss hot unplugged the 2nd disk and plugged a few seconds later.
The problem it’s the freenas doesn’t start anymore after this, says: zfs error couldn’t find the pool, and when i go to see the disk proxmox says: could’t initiate the disk. I can’t see de disk to add it Again. I have rebooted and turned of the server and the disk doesn’t appears
Please help.
 
root@POSEIDON:~# zpool status -v
pool: rpool
state: ONLINE
scan: scrub repaired 0B in 0h0m with 0 errors on Sun May 12 00:24:38 2019
config:
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
sda3 ONLINE 0 0 0
errors: No known data errors
 
Code: 
root@POSEIDON:~# zpool import
   pool: freenas-boot
     id: 11378699045471226230
  state: ONLINE
 status: Some supported features are not enabled on the pool.
 action: The pool can be imported using its name or numeric identifier, though
        some features will not be available without an explicit 'zpool upgrade'.
 config:

        freenas-boot  ONLINE
          zd48        ONLINE
 
thanks Lnxbil for the reply.
now i have deleted the zfs of the 2nd disk from datacenter/storage, and detach the drive from the VM/Hardware, now the Vm starts but has no OS.
i'm very confused, i don't understand why this happend. i don't know if the problem was unplugg the disk in hot. it's there any procedure to hot swap the disks?
 
i can't see the disk

Code: 
root@POSEIDON:~# fdisk -l
Disk /dev/sda: 931 GiB, 999653638144 bytes, 1952448512 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 318F08C5-0A9E-43C9-84F7-5035C8519E35

Device       Start        End    Sectors   Size Type
/dev/sda1       34       2047       2014  1007K BIOS boot
/dev/sda2     2048    1050623    1048576   512M EFI System
/dev/sda3  1050624 1952448478 1951397855 930.5G Solaris /usr & Apple ZFS


Disk /dev/zd0: 100 GiB, 107374182400 bytes, 209715200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 8192 bytes
I/O size (minimum/optimal): 8192 bytes / 8192 bytes
Disklabel type: dos
Disk identifier: 0x000bc7f9

Device     Boot   Start       End   Sectors Size Id Type
/dev/zd0p1 *       2048   2099199   2097152   1G 83 Linux
/dev/zd0p2      2099200 209715199 207616000  99G 8e Linux LVM


Disk /dev/zd32: 6.5 GiB, 7008681984 bytes, 13688832 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 8192 bytes
I/O size (minimum/optimal): 8192 bytes / 8192 bytes


Disk /dev/zd48: 15 GiB, 16106127360 bytes, 31457280 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 8192 bytes
I/O size (minimum/optimal): 8192 bytes / 8192 bytes
Disklabel type: gpt
Disk identifier: 0357D015-6DED-11E9-85ED-298A86C42B77

Device      Start      End  Sectors  Size Type
/dev/zd48p1    40     1063     1024  512K FreeBSD boot
/dev/zd48p2  1064 31425575 31424512   15G FreeBSD ZFS

Partition 1 does not start on physical sector boundary.
Partition 2 does not start on physical sector boundary.
 
You must log in or register to reply here.
Top Bottom