Hi, on my Proxmox Cluster one node throw this email.
we've done a long SMART test on this drive and got no errors.
And zpool detail gives
Should we change this drive? or it's a false alarm?.
Thanks.
Code:
The number of I/O errors associated with a ZFS device exceeded acceptable levels. ZFS has marked the device as faulted.
impact: Fault tolerance of the pool may be compromised.
eid: 445648
class: statechange
state: FAULTED
host: node01
time: 2020-04-12 07:04:42+0200
vpath: /dev/sda1
vphys: pci-0000:00:1f.2-ata-1
vguid: 0x7F878357D147A4A5
devid: ata-WDC_WD2004FBYZ-01YCBB1_xxxxxxxxxxxxxxxxxxxxx-part1
pool: 0xF0A3E89FFACE50B7we've done a long SMART test on this drive and got no errors.
Code:
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 175 174 021 Pre-fail Always - 4250
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 21
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 057 057 000 Old_age Always - 31593
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 21
16 Total_LBAs_Read 0x0022 014 186 000 Old_age Always - 758610618042
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 9
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 389
194 Temperature_Celsius 0x0022 123 108 000 Old_age Always - 24
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 31583 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.And zpool detail gives
Code:
root@node01:~# zpool status
pool: rpool
state: DEGRADED
status: One or more devices are faulted in response to persistent errors.
Sufficient replicas exist for the pool to continue functioning in a
degraded state.
action: Replace the faulted device, or use 'zpool clear' to mark the device
repaired.
scan: scrub repaired 0B in 0 days 03:02:37 with 0 errors on Sun Apr 12 03:26:39 2020
config:
NAME STATE READ WRITE CKSUM
rpool DEGRADED 0 0 0
mirror-0 DEGRADED 0 0 0
sda FAULTED 0 51 0 too many errors
sdb ONLINE 0 0 0
mirror-1 ONLINE 0 0 0
sdc ONLINE 0 0 0
sdd ONLINE 0 0 0
errors: No known data errorsShould we change this drive? or it's a false alarm?.
Thanks.
Last edited:
