XIAOLO USB C auf 2.5Gbit Netzwerkkarten(stecker)

M

mpatzwah

Member
Dec 26, 2021
115
5
23
56
Guten Morgen!,

ich versuche seit letzter Woche einen USB-C auf 2.5Gbit Netzwerk an meinem Proxmox Knoten zum Laufen zu bringen, leider ohne Erfolg.
Hat jemand das schon mal jemand geschafft? (USB_Netzwerkadpater zum Laufen zu bringen)
Für die Übertragung der Daten zu einem anderen Knoten wären 2.5 Gbit natürlich eine feine Sache
Die anderen Slots auf dem Mainboard sind leider schon belegt.

Danke und Gruß
Marco
 
auch habe ich schon versucht usb auf vga zum laufen zu bringen, dann hätte ich einen PCI Slot (Grafikkarte) wieder frei. Hat das schon jemand geschafft ?
 
Was hast du denn für Hardware?

dmesg | grep usb
 
Last edited:
root@pve:~# dmesg | grep usb
[ 0.841040] usbcore: registered new interface driver usbfs
[ 0.841040] usbcore: registered new interface driver hub
[ 0.841040] usbcore: registered new device driver usb
[ 1.612986] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 5.13
[ 1.612987] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.612988] usb usb1: Product: xHCI Host Controller
[ 1.612989] usb usb1: Manufacturer: Linux 5.13.19-4-pve xhci-hcd
[ 1.612989] usb usb1: SerialNumber: 0000:01:00.0
[ 1.616081] usb usb2: We don't know the algorithms for LPM for this host, dis abling LPM.
[ 1.616089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bc dDevice= 5.13
[ 1.616090] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.616090] usb usb2: Product: xHCI Host Controller
[ 1.616091] usb usb2: Manufacturer: Linux 5.13.19-4-pve xhci-hcd
[ 1.616091] usb usb2: SerialNumber: 0000:01:00.0
[ 1.618052] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 5.13
[ 1.618053] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.618054] usb usb3: Product: xHCI Host Controller
[ 1.618054] usb usb3: Manufacturer: Linux 5.13.19-4-pve xhci-hcd
[ 1.618055] usb usb3: SerialNumber: 0000:09:00.3
[ 1.618219] usb usb4: We don't know the algorithms for LPM for this host, dis abling LPM.
[ 1.618226] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bc dDevice= 5.13
[ 1.618227] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.618227] usb usb4: Product: xHCI Host Controller
[ 1.618228] usb usb4: Manufacturer: Linux 5.13.19-4-pve xhci-hcd
[ 1.618228] usb usb4: SerialNumber: 0000:09:00.3
[ 1.956974] usb 3-3: new low-speed USB device number 2 using xhci_hcd
[ 1.956982] usb 1-6: new full-speed USB device number 2 using xhci_hcd
[ 2.157318] usb 3-3: New USB device found, idVendor=04d9, idProduct=1603, bcd Device= 3.10
[ 2.157320] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.157321] usb 3-3: Product: USB Keyboard
[ 2.157322] usb 3-3: Manufacturer:
[ 2.216366] usbcore: registered new interface driver usbhid
[ 2.216367] usbhid: USB HID core driver
[ 2.234108] usbcore: registered new interface driver usbkbd
[ 2.238056] input: USB Keyboard as /devices/pci0000:00/0000:00:08.1/0000:09 :00.3/usb3/3-3/3-3:1.0/0003:04D9:1603.0001/input/input2
[ 2.279509] usb 1-6: config 1 has an invalid interface number: 2 but max is 1
[ 2.279511] usb 1-6: config 1 has no interface number 1
[ 2.291583] usb 1-6: New USB device found, idVendor=0b05, idProduct=1939, bcd Device= 1.00
[ 2.291585] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.291586] usb 1-6: Product: AURA LED Controller
[ 2.291587] usb 1-6: Manufacturer: AsusTek Computer Inc.
[ 2.291588] usb 1-6: SerialNumber: 9876543210
[ 2.297009] hid-generic 0003:04D9:1603.0001: input,hidraw0: USB HID v1.10 Key board [ USB Keyboard] on usb-0000:09:00.3-3/input0
[ 2.297057] input: USB Keyboard System Control as /devices/pci0000:00/0000: 00:08.1/0000:09:00.3/usb3/3-3/3-3:1.1/0003:04D9:1603.0002/input/input3
[ 2.304283] hid-generic 0003:0B05:1939.0003: hiddev0,hidraw1: USB HID v1.11 D evice [AsusTek Computer Inc. AURA LED Controller] on usb-0000:01:00.0-6/input2
[ 2.357029] input: USB Keyboard Consumer Control as /devices/pci0000:00/000 0:00:08.1/0000:09:00.3/usb3/3-3/3-3:1.1/0003:04D9:1603.0002/input/input4
[ 2.357056] hid-generic 0003:04D9:1603.0002: input,hidraw2: USB HID v1.10 Dev ice [ USB Keyboard] on usb-0000:09:00.3-3/input1
[ 2.496973] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[ 2.732710] usb 1-7: New USB device found, idVendor=05e3, idProduct=0610, bcd Device=60.60
[ 2.732712] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.732714] usb 1-7: Product: USB2.0 Hub
[54786.556110] Modules linked in: usbnet mii md4 cmac nls_utf8 cifs libarc4 libd es veth rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache netfs ebtable_ filter ebtables ip_set ip6table_raw iptable_raw ip6table_filter ip6_tables iptab le_filter bpfilter sctp ip6_udp_tunnel udp_tunnel nf_tables bonding tls softdog nfnetlink_log nfnetlink intel_rapl_msr intel_rapl_common edac_mce_amd kvm_amd sn d_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi kvm n ouveau irqbypass crct10dif_pclmul ghash_clmulni_intel aesni_intel mxm_wmi drm_tt m_helper ttm crypto_simd snd_hda_intel cryptd snd_intel_dspcfg snd_intel_sdw_acp i rapl drm_kms_helper snd_hda_codec eeepc_wmi cec snd_hda_core asus_wmi input_le ds rc_core snd_hwdep sparse_keymap pcspkr i2c_algo_bit efi_pstore snd_pcm video fb_sys_fops syscopyarea wmi_bmof sysfillrect snd_timer sysimgblt k10temp ccp snd soundcore zfs(PO) zunicode(PO) zzstd(O) mac_hid zlua(O) zavl(PO) icp(PO) zcommo n(PO) znvpair(PO) spl(O) vhost_net vhost
[54786.556267] vhost_iotlb tap ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp li biscsi_tcp libiscsi scsi_transport_iscsi drm sunrpc ip_tables x_tables autofs4 b trfs blake2b_generic xor zstd_compress raid6_pq dm_thin_pool dm_persistent_data dm_bio_prison dm_bufio libcrc32c hid_generic usbkbd usbhid hid crc32_pclmul i2c_ piix4 nvme r8169 e1000e realtek xhci_pci xhci_pci_renesas nvme_core ahci xhci_hc d libahci wmi gpio_amdpt gpio_generic
[310781.155137] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[310781.174694] usb 2-2: config 1 interface 1 altsetting 0 has a duplicate endpo int with address 0x81, skipping
...
[310781.174710] usb 2-2: New USB device found, idVendor=1d5c, idProduct=2000, bc dDevice= 2.00
[310781.174712] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber= 0
[310781.194410] usb-storage 2-2:1.3: USB Mass Storage device detected
[310781.194502] scsi host6: usb-storage 2-2:1.3
[310781.194543] usbcore: registered new interface driver usb-storage
[310781.195451] usbcore: registered new interface driver uas
[310813.712943] usb 2-2: reset SuperSpeed USB device number 2 using xhci_hcd
root@pve:~# dmesg | grep usb
[ 0.841040] usbcore: registered new interface driver usbfs
[ 0.841040] usbcore: registered new interface driver hub
[ 0.841040] usbcore: registered new device driver usb
[ 1.612986] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[ 1.612987] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.612988] usb usb1: Product: xHCI Host Controller
[ 1.612989] usb usb1: Manufacturer: Linux 5.13.19-4-pve xhci-hcd
[ 1.612989] usb usb1: SerialNumber: 0000:01:00.0
[ 1.616081] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.616089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13
[ 1.616090] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.616090] usb usb2: Product: xHCI Host Controller
[ 1.616091] usb usb2: Manufacturer: Linux 5.13.19-4-pve xhci-hcd
[ 1.616091] usb usb2: SerialNumber: 0000:01:00.0
[ 1.618052] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[ 1.618053] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.618054] usb usb3: Product: xHCI Host Controller
[ 1.618054] usb usb3: Manufacturer: Linux 5.13.19-4-pve xhci-hcd
[ 1.618055] usb usb3: SerialNumber: 0000:09:00.3
[ 1.618219] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.618226] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13
[ 1.618227] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.618227] usb usb4: Product: xHCI Host Controller
[ 1.618228] usb usb4: Manufacturer: Linux 5.13.19-4-pve xhci-hcd
[ 1.618228] usb usb4: SerialNumber: 0000:09:00.3
[ 1.956974] usb 3-3: new low-speed USB device number 2 using xhci_hcd
[ 1.956982] usb 1-6: new full-speed USB device number 2 using xhci_hcd
[ 2.157318] usb 3-3: New USB device found, idVendor=04d9, idProduct=1603, bcdDevice= 3.10
[ 2.157320] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.157321] usb 3-3: Product: USB Keyboard
[ 2.157322] usb 3-3: Manufacturer:
[ 2.216366] usbcore: registered new interface driver usbhid
[ 2.216367] usbhid: USB HID core driver
[ 2.234108] usbcore: registered new interface driver usbkbd
[ 2.238056] input: USB Keyboard as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/usb3/3-3/3-3:1.0/0003:04D9:1603.0001/input/input2
[ 2.279509] usb 1-6: config 1 has an invalid interface number: 2 but max is 1
[ 2.279511] usb 1-6: config 1 has no interface number 1
[ 2.291583] usb 1-6: New USB device found, idVendor=0b05, idProduct=1939, bcdDevice= 1.00
[ 2.291585] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.291586] usb 1-6: Product: AURA LED Controller
[ 2.291587] usb 1-6: Manufacturer: AsusTek Computer Inc.
[ 2.291588] usb 1-6: SerialNumber: 9876543210
[ 2.297009] hid-generic 0003:04D9:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:09:00.3-3/input0
[ 2.297057] input: USB Keyboard System Control as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/usb3/3-3/3-3:1.1/0003:04D9:1603.0002/input/input3
[ 2.304283] hid-generic 0003:0B05:1939.0003: hiddev0,hidraw1: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:01:00.0-6/input2
[ 2.357029] input: USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/usb3/3-3/3-3:1.1/0003:04D9:1603.0002/input/input4
[ 2.357056] hid-generic 0003:04D9:1603.0002: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:09:00.3-3/input1
[ 2.496973] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[ 2.732710] usb 1-7: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.60
[ 2.732712] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.732714] usb 1-7: Product: USB2.0 Hub
[54786.556110] Modules linked in: usbnet mii md4 cmac nls_utf8 cifs libarc4 libdes veth rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache netfs ebtable_filter ebtables ip_set ip6table_raw iptable_raw ip6table_filter ip6_tables iptable_filter bpfilter sctp ip6_udp_tunnel udp_tunnel nf_tables bonding tls softdog nfnetlink_log nfnetlink intel_rapl_msr intel_rapl_common edac_mce_amd kvm_amd snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi kvm nouveau irqbypass crct10dif_pclmul ghash_clmulni_intel aesni_intel mxm_wmi drm_ttm_helper ttm crypto_simd snd_hda_intel cryptd snd_intel_dspcfg snd_intel_sdw_acpi rapl drm_kms_helper snd_hda_codec eeepc_wmi cec snd_hda_core asus_wmi input_leds rc_core snd_hwdep sparse_keymap pcspkr i2c_algo_bit efi_pstore snd_pcm video fb_sys_fops syscopyarea wmi_bmof sysfillrect snd_timer sysimgblt k10temp ccp snd soundcore zfs(PO) zunicode(PO) zzstd(O) mac_hid zlua(O) zavl(PO) icp(PO) zcommon(PO) znvpair(PO) spl(O) vhost_net vhost
[54786.556267] vhost_iotlb tap ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi drm sunrpc ip_tables x_tables autofs4 btrfs blake2b_generic xor zstd_compress raid6_pq dm_thin_pool dm_persistent_data dm_bio_prison dm_bufio libcrc32c hid_generic usbkbd usbhid hid crc32_pclmul i2c_piix4 nvme r8169 e1000e realtek xhci_pci xhci_pci_renesas nvme_core ahci xhci_hcd libahci wmi gpio_amdpt gpio_generic
[310781.155137] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[310781.174694] usb 2-2: config 1 interface 1 altsetting 0 has a duplicate endpoint with address 0x81, skipping
...
[310781.174710] usb 2-2: New USB device found, idVendor=1d5c, idProduct=2000, bcdDevice= 2.00
[310781.174712] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[310781.194410] usb-storage 2-2:1.3: USB Mass Storage device detected
[310781.194502] scsi host6: usb-storage 2-2:1.3
[310781.194543] usbcore: registered new interface driver usb-storage
[310781.195451] usbcore: registered new interface driver uas
[310813.712943] usb 2-2: reset SuperSpeed USB device number 2 using xhci_hcd
 
Mir scheint es, als würde der Adapter nicht erkannt. Findest du den Adapter als Netzwerkinterface ?

Was genau "scheitert" bei dir?
 
nein eben nicht. ich finde ihn nicht als netzwerkadapter. angeblich läuft das Ding aber unter Linux
 
  • Like
Reactions: mpatzwah and Lixe
der dmesg bringt nichts zurück
Nach dem Kernel Update geht bei mir gar nicht mehr (Netzwerkfehler + ZFS-Fehler)
Wie komme auf den alten kernel zurück ?
 
ich weiß nicht warum, aber jetzt wird der Netzwerkadapter richtig erkannt. Evtl hilft Kernel installation mit nachträglicher Deinstallation :-)
 
wie mist man das denn am Besten ? Ich kenne nur den Spruch: Wer mist mist Mist:-) und den will ich hier nicht verbreiten
 
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom