Hello,
I have a Windows 2008 R2 server serving an NFS share for ISOs (I have just under 200 ISOs not sure if that matters). I can add the NFS share just fine in the web interface. When I select the share and click the contents tab, it's blank. But when I SSH to the PVE server, and browse to the mount point I can see all the ISOs? I also can't install a VM with any of the ISOs, if select the NFS server as a source the drop down lists no ISOs.
The same NFS server is setup for two PVE 1.9 servers (working great for 2 years).
Any ideas?
Thanks in advance!
[ironworks~] pveversion -v
pve-manager: 2.1-14 (pve-manager/2.1/f32f3f46)
running kernel: 2.6.32-14-pve
proxmox-ve-2.6.32: 2.1-74
pve-kernel-2.6.32-11-pve: 2.6.32-66
pve-kernel-2.6.32-14-pve: 2.6.32-74
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.3-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.92-3
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.8-1
pve-cluster: 1.0-27
qemu-server: 2.0-49
pve-firmware: 1.0-18
libpve-common-perl: 1.0-30
libpve-access-control: 1.0-24
libpve-storage-perl: 2.0-31
vncterm: 1.0-3
vzctl: 3.0.30-2pve5
vzprocps: 2.0.11-2
vzquota: 3.0.12-3
pve-qemu-kvm: 1.1-8
ksm-control-daemon: 1.1-1
--Will
I have a Windows 2008 R2 server serving an NFS share for ISOs (I have just under 200 ISOs not sure if that matters). I can add the NFS share just fine in the web interface. When I select the share and click the contents tab, it's blank. But when I SSH to the PVE server, and browse to the mount point I can see all the ISOs? I also can't install a VM with any of the ISOs, if select the NFS server as a source the drop down lists no ISOs.
The same NFS server is setup for two PVE 1.9 servers (working great for 2 years).
Any ideas?
Thanks in advance!
[ironworks~] pveversion -v
pve-manager: 2.1-14 (pve-manager/2.1/f32f3f46)
running kernel: 2.6.32-14-pve
proxmox-ve-2.6.32: 2.1-74
pve-kernel-2.6.32-11-pve: 2.6.32-66
pve-kernel-2.6.32-14-pve: 2.6.32-74
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.3-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.92-3
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.8-1
pve-cluster: 1.0-27
qemu-server: 2.0-49
pve-firmware: 1.0-18
libpve-common-perl: 1.0-30
libpve-access-control: 1.0-24
libpve-storage-perl: 2.0-31
vncterm: 1.0-3
vzctl: 3.0.30-2pve5
vzprocps: 2.0.11-2
vzquota: 3.0.12-3
pve-qemu-kvm: 1.1-8
ksm-control-daemon: 1.1-1
--Will
