Windows 7 kvm stuck at boot [SOLVED]

[Hamiem Thohari]

[SOLVED]

finally i found the solution,

the problem was at windows MBR, i found it here: http://www.linux-kvm.org/page/Windows7Install


Hi all members, first i'm sorry for my bad english.


i tried to install a windows 7 64bit kvm in proxmox ve 3.1.3 , with default setting, IDE hard disk, NAT nework, kvm processor,

installation process was good, until set time zone, etc, but after last restart to complete installation, the VM stuck at : Boot from hard disk...
when i disable kvm hardware virtualization setting, windows start working but so slow and lag,

i practice tips from proxmox i get here: http://pve.proxmox.com/wiki/Windows_7_guest_best_practices but it don't help, same problem happen.

i have read this thread : http://forum.proxmox.com/threads/14223-Windows-7-KVM-s-not-starting-solved

and i check my harddisk setting, i only use one sata harddisk 1 TB, i put it on sata 0 cable. but the problem still happen.

please share your experience in creating win7 kvm. thanks

there a pveversion -v:

proxmox-ve-2.6.32: 3.1-109 (running kernel: 2.6.32-23-pve)
pve-manager: 3.1-3 (running version: 3.1-3/dc0e9b0e)
pve-kernel-2.6.32-23-pve: 2.6.32-109
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.5-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.0-1
pve-cluster: 3.0-7
qemu-server: 3.1-1
pve-firmware: 1.0-23
libpve-common-perl: 3.0-6
libpve-access-control: 3.0-6
libpve-storage-perl: 3.0-10
pve-libspice-server1: 0.12.4-1
vncterm: 1.1-4
vzctl: 4.0-1pve3
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 1.4-17
ksm-control-daemon: 1.1-1
glusterfs-client: 3.4.0-2