Good evening,
I'm trying to allow my server to use the wifi network card.
The status is unknown, so I'll need to install some drivers?
Not sure how, couldn't find any info on installing drivers, besides for the virtio iso, which is for win vm's.
I've added the popular requested info:
I'm running a Fujitsu TX200 S7
root@pve:~# ip link list
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vmbr0 state UP mode DEFAULT group default qlen 1000
link/ether 00:19:99:ed:aa:4d brd ff:ff:ff:ff:ff:ff
3: enp7s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:19:99:ed:aa:4b brd ff:ff:ff:ff:ff:ff
4: wlp5s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether c0:4a:00:51:9d:6c brd ff:ff:ff:ff:ff:ff
5: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether 00:19:99:ed:aa:4d brd ff:ff:ff:ff:ff:ff
33: tap100i0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vmbr0 state UNKNOWN mode DEFAULT group default qlen 1000
link/ether 5a:66:47:2a:be:ec brd ff:ff:ff:ff:ff:ff
root@pve:~#
root@pve:~# lspci -v
05:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express)
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at df400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [60] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 00-15-17-ff-ff-24-14-12
Capabilities: [170] Power Budgeting <?>
Kernel driver in use: ath9k
Kernel modules: ath9k
I'm trying to allow my server to use the wifi network card.
The status is unknown, so I'll need to install some drivers?
Not sure how, couldn't find any info on installing drivers, besides for the virtio iso, which is for win vm's.
I've added the popular requested info:
I'm running a Fujitsu TX200 S7
root@pve:~# ip link list
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vmbr0 state UP mode DEFAULT group default qlen 1000
link/ether 00:19:99:ed:aa:4d brd ff:ff:ff:ff:ff:ff
3: enp7s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:19:99:ed:aa:4b brd ff:ff:ff:ff:ff:ff
4: wlp5s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether c0:4a:00:51:9d:6c brd ff:ff:ff:ff:ff:ff
5: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether 00:19:99:ed:aa:4d brd ff:ff:ff:ff:ff:ff
33: tap100i0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vmbr0 state UNKNOWN mode DEFAULT group default qlen 1000
link/ether 5a:66:47:2a:be:ec brd ff:ff:ff:ff:ff:ff
root@pve:~#
root@pve:~# lspci -v
05:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express)
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at df400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [60] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 00-15-17-ff-ff-24-14-12
Capabilities: [170] Power Budgeting <?>
Kernel driver in use: ath9k
Kernel modules: ath9k