What does this error mean? Noob here, pls be gentle :)

V

vinniedr

New Member
Nov 8, 2024
2
0
1
Hello! Noob here. First time poster....second time installer/user. First installed Proxmox VE v7.4 about a year ago on an old gaming computer as a learning tool. (see HW specs below)

CPU: AMD Ryzen 5 1400 38 °C Summit Ridge 14nm Technology
RAM: 16.0GB Single-Channel DDR4 @ 1197MHz (16-16-16-39) Corsair CMK16GX4M2A2400C16 Vengeance LPX DDR4 2400 C16 2x8GB
Motherboard: ASRock AB350 Pro4 (AM4) 26 °C
Graphics: ATI AMD RADEON R9 280X 1000M Boost 3Gb D5
Storage: 1TB NVMe (where Proxmox is installed) & 8TB HDD

Worked great, no issues. Installed a number of containers/VMs to push it to its limits etc., continued chugging along. I then set it aside for a number of months as other priorities got in the way.

Decided to get back into it about 1 month ago. Saw Proxmox VE v8.2 was available and had features like SDN etc which I wanted to learn about. Installed it and all heck breaks loose. :mad: Onboard Realtek NIC, wasn't playing nice. Endless hours wasted trying to downgrade/upgrade drivers, reinstalled v7.4, nothing ... finally found some Intel NICs online, bought them, installed and seemed to work.... until this error appeared:

ScreenErrorProxmox2.jpg

What is this error? What is the problem? It's been stuck like that for over several hours.... Any ideas?
Thanks in advance to all those providing input... :)
 
Hi,

know what happens exactly could you please provide us with the network configuration `cat /etc/network/interfaces` and the output of `ethtool -i <NIC>`. Additionally, i would check the syslog or `dmesg` looking for any interesting message.
 
Hi Moayad! Here are the results:

root@server2:~# cat /etc/network/interfaces
auto lo
iface lo inet loopback

iface enp7s0 inet manual

auto vmbr0
iface vmbr0 inet static
address 192.168.2.172/24
gateway 192.168.2.1
bridge-ports enp7s0
bridge-stp off
bridge-fd 0

iface enp10s0 inet manual

---- and -----

root@server2:~# ethtool -i enp7s0
driver: igb
version: 6.8.12-4-pve
firmware-version: 3.25, 0x8000060b, 1.654.0
expansion-rom-version:
bus-info: 0000:07:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes

----- dmesg gives the following (I provided only the part that seems to have to do with the Ethernet ports -----

12.268576] audit: type=1400 audit(1732390734.435:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-copy" pid=773 comm="apparmor_parser"
[ 12.268671] audit: type=1400 audit(1732390734.435:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="pve-container-mounthotplug" pid=771 comm="apparmor_parser"
[ 12.269939] audit: type=1400 audit(1732390734.435:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=774 comm="apparmor_parser"
[ 12.270432] audit: type=1400 audit(1732390734.437:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=768 comm="apparmor_parser"
[ 12.270675] audit: type=1400 audit(1732390734.437:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=770 comm="apparmor_parser"
[ 12.270682] audit: type=1400 audit(1732390734.437:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=770 comm="apparmor_parser"
[ 12.273301] audit: type=1400 audit(1732390734.440:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=776 comm="apparmor_parser"
[ 12.273313] audit: type=1400 audit(1732390734.440:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=776 comm="apparmor_parser"
[ 12.273319] audit: type=1400 audit(1732390734.440:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=776 comm="apparmor_parser"
[ 12.274453] audit: type=1400 audit(1732390734.441:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="swtpm" pid=782 comm="apparmor_parser"
[ 12.352956] RPC: Registered named UNIX socket transport module.
[ 12.352966] RPC: Registered udp transport module.
[ 12.352968] RPC: Registered tcp transport module.
[ 12.352971] RPC: Registered tcp-with-tls transport module.
[ 12.352973] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.214794] vmbr0: port 1(enp7s0) entered blocking state
[ 13.214801] vmbr0: port 1(enp7s0) entered disabled state
[ 13.214819] igb 0000:07:00.0 enp7s0: entered allmulticast mode
[ 13.214885] igb 0000:07:00.0 enp7s0: entered promiscuous mode
[ 20.223890] EXT4-fs warning (device dm-10): ext4_multi_mount_protect:328: MMP interval 42 higher than expected, please wait.

[ 62.973307] EXT4-fs (dm-10): recovery complete
[ 62.973953] EXT4-fs (dm-10): mounted filesystem 1f797042-b792-4608-a7c9-27ed06ea49c8 r/w with ordered data mode. Quota mode: none.
[ 63.062377] kauditd_printk_skb: 16 callbacks suppressed
[ 63.062382] audit: type=1400 audit(1732390785.229:28): apparmor="STATUS" operation="profile_load" profile="/usr/bin/lxc-start" name="lxc-100_</var/lib/lxc>" pid=1321 comm="apparmor_parser"
[ 63.790621] vmbr0: port 2(veth100i0) entered blocking state
[ 63.790629] vmbr0: port 2(veth100i0) entered disabled state
[ 63.790647] veth100i0: entered allmulticast mode
[ 63.790710] veth100i0: entered promiscuous mode
[ 63.856484] eth0: renamed from veth9Hsh12
[ 64.398269] vmbr0: port 2(veth100i0) entered blocking state
[ 64.398277] vmbr0: port 2(veth100i0) entered forwarding state
[ 64.555642] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 64.555966] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 64.556150] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 64.556329] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 64.556505] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 64.556592] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 64.556599] cfg80211: failed to load regulatory.db
[ 65.341093] EXT4-fs warning (device dm-11): ext4_multi_mount_protect:328: MMP interval 42 higher than expected, please wait.

[ 108.034404] EXT4-fs (dm-11): recovery complete
[ 108.034792] EXT4-fs (dm-11): mounted filesystem 521da8c0-7c85-4f9c-b13f-403accc69c81 r/w with ordered data mode. Quota mode: none.
[ 108.104748] audit: type=1400 audit(1732390830.272:29): apparmor="STATUS" operation="profile_load" profile="/usr/bin/lxc-start" name="lxc-101_</var/lib/lxc>" pid=1659 comm="apparmor_parser"
[ 108.829714] vmbr0: port 3(veth101i0) entered blocking state
[ 108.829722] vmbr0: port 3(veth101i0) entered disabled state
[ 108.829743] veth101i0: entered allmulticast mode
[ 108.829810] veth101i0: entered promiscuous mode
[ 108.894016] eth0: renamed from veth4AV010
[ 109.611580] vmbr0: port 3(veth101i0) entered blocking state
[ 109.611588] vmbr0: port 3(veth101i0) entered forwarding state
[ 110.345335] EXT4-fs warning (device dm-12): ext4_multi_mount_protect:328: MMP interval 42 higher than expected, please wait.

[ 153.090691] EXT4-fs (dm-12): recovery complete
[ 153.091080] EXT4-fs (dm-12): mounted filesystem 130d1fc2-0c5a-4fd2-87d6-298200b1ffbe r/w with ordered data mode. Quota mode: none.
[ 153.163634] audit: type=1400 audit(1732390875.332:30): apparmor="STATUS" operation="profile_load" profile="/usr/bin/lxc-start" name="lxc-102_</var/lib/lxc>" pid=2169 comm="apparmor_parser"
[ 153.885636] vmbr0: port 4(veth102i0) entered blocking state
[ 153.885644] vmbr0: port 4(veth102i0) entered disabled state
[ 153.885672] veth102i0: entered allmulticast mode
[ 153.885737] veth102i0: entered promiscuous mode
[ 153.946239] eth0: renamed from vethTEfdTa
[ 154.620572] vmbr0: port 4(veth102i0) entered blocking state
[ 154.620583] vmbr0: port 4(veth102i0) entered forwarding state
[ 155.395735] EXT4-fs warning (device dm-13): ext4_multi_mount_protect:328: MMP interval 42 higher than expected, please wait.

[ 159.836156] [drm] fb mappable at 0xE05E1000
[ 159.836161] [drm] vram apper at 0xE0000000
[ 159.836163] [drm] size 14745600
[ 159.836165] [drm] fb depth is 24
[ 159.836166] [drm] pitch is 10240
[ 159.836265] fbcon: radeondrmfb (fb0) is primary device
[ 159.859496] Console: switching to colour frame buffer device 160x45
[ 159.862334] radeon 0000:0b:00.0: [drm] fb0: radeondrmfb frame buffer device
[ 198.170502] EXT4-fs (dm-13): recovery complete
[ 198.170904] EXT4-fs (dm-13): mounted filesystem 1aec54e7-4d4a-4942-bd1f-fdf1708edfef r/w with ordered data mode. Quota mode: none.
[ 198.245999] audit: type=1400 audit(1732390920.414:31): apparmor="STATUS" operation="profile_load" profile="/usr/bin/lxc-start" name="lxc-103_</var/lib/lxc>" pid=2737 comm="apparmor_parser"
[ 198.970383] vmbr0: port 5(veth103i0) entered blocking state
[ 198.970392] vmbr0: port 5(veth103i0) entered disabled state
[ 198.970411] veth103i0: entered allmulticast mode
[ 198.970489] veth103i0: entered promiscuous mode
[ 199.035469] eth0: renamed from vethPpDDHG
[ 199.840062] vmbr0: port 5(veth103i0) entered blocking state
[ 199.840069] vmbr0: port 5(veth103i0) entered forwarding state
[ 200.437772] EXT4-fs warning (device dm-14): ext4_multi_mount_protect:328: MMP interval 42 higher than expected, please wait.

[ 243.280765] EXT4-fs (dm-14): 1 orphan inode deleted
[ 243.280773] EXT4-fs (dm-14): recovery complete
[ 243.285832] EXT4-fs (dm-14): mounted filesystem aa82f894-c839-4901-b1e8-051951cbf495 r/w with ordered data mode. Quota mode: none.
[ 243.362705] audit: type=1400 audit(1732390965.531:32): apparmor="STATUS" operation="profile_load" profile="/usr/bin/lxc-start" name="lxc-104_</var/lib/lxc>" pid=3226 comm="apparmor_parser"
[ 244.097906] vmbr0: port 6(veth104i0) entered blocking state
[ 244.097914] vmbr0: port 6(veth104i0) entered disabled state
[ 244.097942] veth104i0: entered allmulticast mode
[ 244.098015] veth104i0: entered promiscuous mode
[ 244.161633] eth0: renamed from vethE0WjhK
[ 245.156893] vmbr0: port 6(veth104i0) entered blocking state
[ 245.156902] vmbr0: port 6(veth104i0) entered forwarding state
[ 245.499271] EXT4-fs warning (device dm-15): ext4_multi_mount_protect:328: MMP interval 42 higher than expected, please wait.

[ 263.249930] usb 1-10: new low-speed USB device number 3 using xhci_hcd
[ 263.554141] usb 1-10: New USB device found, idVendor=04b4, idProduct=0101, bcdDevice= 0.01
[ 263.554147] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 263.554151] usb 1-10: Product: SteelS쀁̄Љ̒DATA
[ 263.554154] usb 1-10: Manufacturer: DATACOMP
[ 263.632225] input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0/0003:04B4:0101.0004/input/input20
[ 263.684309] hid-generic 0003:04B4:0101.0004: input,hidraw3: USB HID v1.00 Keyboard [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:03:00.0-10/input0
[ 263.729177] input: DATACOMP SteelS쀁̄Љ̒DATA System Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.1/0003:04B4:0101.0005/input/input21
[ 263.781162] input: DATACOMP SteelS쀁̄Љ̒DATA Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.1/0003:04B4:0101.0005/input/input22
[ 263.781279] hid-generic 0003:04B4:0101.0005: input,hidraw4: USB HID v1.00 Device [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:03:00.0-10/input1
[ 288.240147] EXT4-fs (dm-15): 13 orphan inodes deleted
[ 288.240155] EXT4-fs (dm-15): recovery complete
[ 288.245295] EXT4-fs (dm-15): mounted filesystem a9814637-44d8-4ec6-a22f-668c20dcf6a9 r/w with ordered data mode. Quota mode: none.
[ 288.319430] audit: type=1400 audit(1732391010.488:33): apparmor="STATUS" operation="profile_load" profile="/usr/bin/lxc-start" name="lxc-105_</var/lib/lxc>" pid=3948 comm="apparmor_parser"
[ 289.043452] vmbr0: port 7(veth105i0) entered blocking state
[ 289.043459] vmbr0: port 7(veth105i0) entered disabled state
[ 289.043490] veth105i0: entered allmulticast mode
[ 289.043563] veth105i0: entered promiscuous mode
[ 289.106248] eth0: renamed from vethBodaDn
[ 289.831812] vmbr0: port 7(veth105i0) entered blocking state
[ 289.831819] vmbr0: port 7(veth105i0) entered forwarding state
[ 290.483529] EXT4-fs warning (device dm-16): ext4_multi_mount_protect:328: MMP interval 42 higher than expected, please wait.

[ 333.341359] EXT4-fs (dm-16): 13 orphan inodes deleted
[ 333.341366] EXT4-fs (dm-16): recovery complete
[ 333.348907] EXT4-fs (dm-16): mounted filesystem 99ab35ff-0eb3-4eeb-8fe4-ebbc246dc4b4 r/w with ordered data mode. Quota mode: none.
[ 333.421702] audit: type=1400 audit(1732391055.591:34): apparmor="STATUS" operation="profile_load" profile="/usr/bin/lxc-start" name="lxc-106_</var/lib/lxc>" pid=4566 comm="apparmor_parser"
[ 334.152270] vmbr0: port 8(veth106i0) entered blocking state
[ 334.152278] vmbr0: port 8(veth106i0) entered disabled state
[ 334.152309] veth106i0: entered allmulticast mode
[ 334.152379] veth106i0: entered promiscuous mode
[ 334.215793] eth0: renamed from vethNKmLpy
[ 335.025213] vmbr0: port 8(veth106i0) entered blocking state
[ 335.025222] vmbr0: port 8(veth106i0) entered forwarding state
[ 352.663738] overlayfs: fs on '/var/lib/docker/overlay2/check-overlayfs-support1298962053/lower2' does not support file handles, falling back to xino=off.
[ 352.678749] overlayfs: fs on '/var/lib/docker/overlay2/metacopy-check1735828596/l1' does not support file handles, falling back to xino=off.
[ 352.678838] evm: overlay not supported
[ 352.788309] overlayfs: fs on '/var/lib/docker/overlay2/l/FK4OKVS2IOMKPZVYN6SQXYUF6N' does not support file handles, falling back to xino=off.
[ 352.795311] overlayfs: fs on '/var/lib/docker/overlay2/l/KZGMN4O2ZFRUKAFGX3NF24VNDV' does not support file handles, falling back to xino=off.
[ 352.796436] overlayfs: fs on '/var/lib/docker/overlay2/l/VIH4HA3RG2MYUDOW3CJPOIM6ZF' does not support file handles, falling back to xino=off.
[ 352.801803] overlayfs: fs on '/var/lib/docker/overlay2/l/5NZJ6FQRVWH4JU5J342ASSFX4Z' does not support file handles, falling back to xino=off.
[ 352.933593] Initializing XFRM netlink socket
[ 353.716333] overlayfs: fs on '/var/lib/docker/overlay2/l/5NZJ6FQRVWH4JU5J342ASSFX4Z' does not support file handles, falling back to xino=off.
[ 353.716387] overlayfs: fs on '/var/lib/docker/overlay2/l/KZGMN4O2ZFRUKAFGX3NF24VNDV' does not support file handles, falling back to xino=off.
[ 353.716929] overlayfs: fs on '/var/lib/docker/overlay2/l/FK4OKVS2IOMKPZVYN6SQXYUF6N' does not support file handles, falling back to xino=off.
[ 353.717465] overlayfs: fs on '/var/lib/docker/overlay2/l/VIH4HA3RG2MYUDOW3CJPOIM6ZF' does not support file handles, falling back to xino=off.
[ 353.719509] br-9d87707eb4e0: port 1(vethdb3295e) entered blocking state
[ 353.719514] br-9d87707eb4e0: port 1(vethdb3295e) entered disabled state
[ 353.719522] vethdb3295e: entered allmulticast mode
[ 353.719589] vethdb3295e: entered promiscuous mode
[ 353.732924] br-9d87707eb4e0: port 2(veth9b8f8aa) entered blocking state
[ 353.732931] br-9d87707eb4e0: port 2(veth9b8f8aa) entered disabled state
[ 353.733135] veth9b8f8aa: entered allmulticast mode
[ 353.733302] veth9b8f8aa: entered promiscuous mode
[ 353.761257] br-9d87707eb4e0: port 3(vethb2b6f69) entered blocking state
[ 353.761265] br-9d87707eb4e0: port 3(vethb2b6f69) entered disabled state
[ 353.761301] vethb2b6f69: entered allmulticast mode
[ 353.761388] vethb2b6f69: entered promiscuous mode
[ 353.791559] br-9d87707eb4e0: port 4(veth78f5fe0) entered blocking state
[ 353.791566] br-9d87707eb4e0: port 4(veth78f5fe0) entered disabled state
[ 353.791584] veth78f5fe0: entered allmulticast mode
[ 353.791662] veth78f5fe0: entered promiscuous mode
[ 354.191705] eth0: renamed from vethc02d5d3
[ 354.243001] eth0: renamed from veth001fd48
[ 354.259062] eth0: renamed from veth7d87e2f
[ 354.271543] br-9d87707eb4e0: port 3(vethb2b6f69) entered blocking state
[ 354.271552] br-9d87707eb4e0: port 3(vethb2b6f69) entered forwarding state
[ 354.285058] eth0: renamed from vethff717d0
[ 354.298731] br-9d87707eb4e0: port 4(veth78f5fe0) entered blocking state
[ 354.298739] br-9d87707eb4e0: port 4(veth78f5fe0) entered forwarding state
[ 354.298804] br-9d87707eb4e0: port 1(vethdb3295e) entered blocking state
[ 354.298808] br-9d87707eb4e0: port 1(vethdb3295e) entered forwarding state
[ 354.298869] br-9d87707eb4e0: port 2(veth9b8f8aa) entered blocking state
[ 354.298873] br-9d87707eb4e0: port 2(veth9b8f8aa) entered forwarding state
[ 354.413663] overlayfs: fs on '/var/lib/docker/overlay2/opaque-bug-check3838746289/l2' does not support file handles, falling back to xino=off.
[ 442.534931] igb 0000:07:00.0 enp7s0: igb: enp7s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 442.746989] vmbr0: port 1(enp7s0) entered blocking state
[ 442.747004] vmbr0: port 1(enp7s0) entered forwarding state
 
Thank you for the output!

I don't see anything related to the issue in the above info you've provided..... I would check if `igb` NIC have an available firmware update.
 
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom
Back