we use no switch connect 3 node server install error.

[haiwan]

hi, support



we use this connect later install pve 6.2 happen this error. have give me guide ? tks

 

[Rares]

How do you get DHCP if the servers are connected one to another?

I assume that you have a 3rd interface for connecting to the network and Internet. Install Proxmox on each server individually and connect them after that.

Follow this setup: https://pve.proxmox.com/wiki/Full_Mesh_Network_for_Ceph_Server

The only change is that I made the bond but the IP was set on the bridge not on the bond.

auto enp175s0f0
iface enp175s0f0 inet manual

auto enp175s0f1
iface enp175s0f1 inet manual

auto bond0
iface bond0 inet manual
    bond-slaves enp175s0f0 enp175s0f1
    bond-miimon 100
    bond-mode broadcast
    
auto vmbr2
iface vmbr2 inet static
    address 172.31.6.2/29
    bridge-ports bond0
    bridge-stp off
    bridge-fd 0

 

[haiwan]

How do you get DHCP if the servers are connected one to another?

I assume that you have a 3rd interface for connecting to the network and Internet. Install Proxmox on each server individually and connect them after that.

Follow this setup: https://pve.proxmox.com/wiki/Full_Mesh_Network_for_Ceph_Server

The only change is that I made the bond but the IP was set on the bridge not on the bond.

auto enp175s0f0
iface enp175s0f0 inet manual

auto enp175s0f1
iface enp175s0f1 inet manual

auto bond0
iface bond0 inet manual
    bond-slaves enp175s0f0 enp175s0f1
    bond-miimon 100
    bond-mode broadcast
   
auto vmbr2
iface vmbr2 inet static
    address 172.31.6.2/29
    bridge-ports bond0
    bridge-stp off
    bridge-fd 0

tks, let me try . great.

 

[haiwan]

so , we found a trouble,
we no connect server install pve still happen error on pve 6.2 . now we change ios 5.4 is ok

 

[haiwan]

hi, if have wish please check , new version happen this trouble, old version is normal. tks