When ever booting the VM I'm promted with the following screen. No matter what Drive interface I use. (Sata,IDE,SCSI) 
VMWare imported OVF wont boot with UEFI
- Thread starter Brodie@Kuemedia
- Start date
are you sure the vm was installed with uefi? if yes, you probably have to setup the boot entries, look here: https://pve.proxmox.com/wiki/OVMF/UEFI_Boot_Entries
The trick for me (HAOS guest system, Linux-based, installed with EFI in VMWare) was to change:
- SCSI controller type from default LSI to VirtIO SCSI
- BIOS type from default SeaBIOS to OVMF (UEFI)
And of course add a network adapter of the same type (in my case it was E1000), I copied over the MAC address too, so just got the same IP address as before from DHCP.
- SCSI controller type from default LSI to VirtIO SCSI
- BIOS type from default SeaBIOS to OVMF (UEFI)
And of course add a network adapter of the same type (in my case it was E1000), I copied over the MAC address too, so just got the same IP address as before from DHCP.
Sometimes it is that secure boot needs to be disabled in the proxmox VM uefi bios. At least that was the issue for me and others, if everything else checks out.
https://forum.proxmox.com/threads/failing-to-boot-home-assistant-qcow2-image-disk-uefi-access-denied.99892/#post-431382
https://jhartman.pl/2021/11/08/proxmox-7-cant-boot-to-uefi-home-assistant-and-other-uefi-images/
https://forum.proxmox.com/threads/failing-to-boot-home-assistant-qcow2-image-disk-uefi-access-denied.99892/#post-431382
https://jhartman.pl/2021/11/08/proxmox-7-cant-boot-to-uefi-home-assistant-and-other-uefi-images/