When Migrating a VM from PVE2 back to PVE1 I get this message:
Task viewer: VM 102 - Migrate
OutputStatus
Stop
Download
2024-08-10 10:51:47 # /usr/bin/ssh -e none -o 'BatchMode=yes' -o 'HostKeyAlias=pve1' -o 'UserKnownHostsFile=/etc/pve/nodes/pve1/ssh_known_hosts' -o 'GlobalKnownHostsFile=none' root@192.168.100.25 /bin/true
2024-08-10 10:51:47 ssh: connect to host 192.168.100.25 port 22: Connection timed out
2024-08-10 10:51:47 ERROR: migration aborted (duration 00:02:15): Can't connect to destination address using public key
TASK ERROR: migration aborted
The IP address of the PVE1 is 192.168.1.25 PVE2192.168.1.26.
This is what comes up when I run a cat /etc/pve/.members
root@pve1:/etc/pve/nodes# cat /etc/pve/.members
{
"nodename": "pve1",
"version": 4,
"cluster": { "name": "wsb-cluster", "version": 3, "nodes": 3, "quorate": 1 },
"nodelist": {
"pve1": { "id": 1, "online": 1, "ip": "192.168.100.25"},
"pve2": { "id": 2, "online": 1, "ip": "192.168.1.26"},
"pve3": { "id": 3, "online": 0}
}
Also when I do a ip a for the PVE1 I get this repsonse:
vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 24:6e:96:31:54:88 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.25/24 scope global vmbr0
valid_lft forever preferred_lft forever
inet6 fe80::266e:96ff:fe31:5488/64 scope link
Any idea how to change the "pve1": { "id": 1, "online": 1, "ip": "192.168.100.25"}, to the actual ip address of the PVE1 to 192.168.1.25?
Task viewer: VM 102 - Migrate
OutputStatus
Stop
Download
2024-08-10 10:51:47 # /usr/bin/ssh -e none -o 'BatchMode=yes' -o 'HostKeyAlias=pve1' -o 'UserKnownHostsFile=/etc/pve/nodes/pve1/ssh_known_hosts' -o 'GlobalKnownHostsFile=none' root@192.168.100.25 /bin/true
2024-08-10 10:51:47 ssh: connect to host 192.168.100.25 port 22: Connection timed out
2024-08-10 10:51:47 ERROR: migration aborted (duration 00:02:15): Can't connect to destination address using public key
TASK ERROR: migration aborted
The IP address of the PVE1 is 192.168.1.25 PVE2192.168.1.26.
This is what comes up when I run a cat /etc/pve/.members
root@pve1:/etc/pve/nodes# cat /etc/pve/.members
{
"nodename": "pve1",
"version": 4,
"cluster": { "name": "wsb-cluster", "version": 3, "nodes": 3, "quorate": 1 },
"nodelist": {
"pve1": { "id": 1, "online": 1, "ip": "192.168.100.25"},
"pve2": { "id": 2, "online": 1, "ip": "192.168.1.26"},
"pve3": { "id": 3, "online": 0}
}
Also when I do a ip a for the PVE1 I get this repsonse:
vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 24:6e:96:31:54:88 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.25/24 scope global vmbr0
valid_lft forever preferred_lft forever
inet6 fe80::266e:96ff:fe31:5488/64 scope link
Any idea how to change the "pve1": { "id": 1, "online": 1, "ip": "192.168.100.25"}, to the actual ip address of the PVE1 to 192.168.1.25?