Hello,
One VM change state in "pause" for an unknown reason.
I started it and after somes minutes or hours, been in pause.
I must resume it on open console.
It's a Windows 7 64 bits.
I have other Linux or Windows 2012 VM. No "pause" problem.
If i open console and a windows session, i can use the Windows.
The VM icon at the left of VM name haven't got the screen arrow and it is in dark grey.
Maybie, it's since i install virtio drivers (network, virtio scsi controller, ballon, serial, qemu-
agent) version 1.149-lastest.
I removed them and install 1.141 version, qemu-agent v1.141 too, same result.
I had disabled qemu agent in vm config : same result.
if you have an idea...
Maybie i will reinstall this nodes, what I can do later in few month.
pveversion :
vm config :
in daemon.log file :
One VM change state in "pause" for an unknown reason.
I started it and after somes minutes or hours, been in pause.
I must resume it on open console.
It's a Windows 7 64 bits.
I have other Linux or Windows 2012 VM. No "pause" problem.
If i open console and a windows session, i can use the Windows.
The VM icon at the left of VM name haven't got the screen arrow and it is in dark grey.
Maybie, it's since i install virtio drivers (network, virtio scsi controller, ballon, serial, qemu-
agent) version 1.149-lastest.
I removed them and install 1.141 version, qemu-agent v1.141 too, same result.
I had disabled qemu agent in vm config : same result.
if you have an idea...
Maybie i will reinstall this nodes, what I can do later in few month.
pveversion :
Code:
proxmox-ve: 5.2-2 (running kernel: 4.15.18-1-pve)
pve-manager: 5.2-6 (running version: 5.2-6/bcd5f008)
pve-kernel-4.15: 5.2-4
pve-kernel-4.13: 5.2-2
pve-kernel-4.15.18-1-pve: 4.15.18-16
pve-kernel-4.15.17-2-pve: 4.15.17-10
pve-kernel-4.13.16-4-pve: 4.13.16-51
pve-kernel-4.13.16-3-pve: 4.13.16-50
pve-kernel-4.13.13-6-pve: 4.13.13-42
pve-kernel-4.10.17-4-pve: 4.10.17-24
pve-kernel-4.10.17-3-pve: 4.10.17-23
pve-kernel-4.4.83-1-pve: 4.4.83-96
pve-kernel-4.4.35-1-pve: 4.4.35-77
corosync: 2.4.2-pve5
criu: 2.11.1-1~bpo90
glusterfs-client: 3.8.8-1
ksm-control-daemon: 1.2-2
libjs-extjs: 6.0.1-2
libpve-access-control: 5.0-8
libpve-apiclient-perl: 2.0-5
libpve-common-perl: 5.0-37
libpve-guest-common-perl: 2.0-17
libpve-http-server-perl: 2.0-9
libpve-storage-perl: 5.0-24
libqb0: 1.0.1-1
lvm2: 2.02.168-pve6
lxc-pve: 3.0.0-3
lxcfs: 3.0.0-1
novnc-pve: 1.0.0-2
proxmox-widget-toolkit: 1.0-19
pve-cluster: 5.0-29
pve-container: 2.0-24
pve-docs: 5.2-5
pve-firewall: 3.0-13
pve-firmware: 2.0-5
pve-ha-manager: 2.0-5
pve-i18n: 1.0-6
pve-libspice-server1: 0.12.8-3
pve-qemu-kvm: 2.11.2-1
pve-xtermjs: 1.0-5
qemu-server: 5.0-30
smartmontools: 6.5+svn4324-1
spiceterm: 3.0-5
vncterm: 1.5-3
zfsutils-linux: 0.7.9-pve1~bpo9
Code:
bootdisk: virtio0
cores: 2
cpu: host
hotplug: network,usb
ide2: none,media=cdrom
keyboard: fr
memory: 2048
name: PPG-Win7
net0: virtio=BE:E6:33:9A:AB:9E,bridge=vmbr0
net1: virtio=5E:17:E0:D4:3D:ED,bridge=vmbr0,tag=2
net2: virtio=22:4C:22:E4:C8:8B,bridge=vmbr0,link_down=1
net3: virtio=A2:E6:4C:84:94:4F,bridge=vmbr0,tag=13
numa: 1
onboot: 1
ostype: win7
scsihw: virtio-scsi-pci
smbios1: uuid=5dce7d74-a626-44d6-9f1e-027ff1540153
sockets: 1
startup: order=3,up=30,down=20
tablet: 0
vga: qxl
virtio0: local:102/vm-102-disk-1.qcow2,cache=writethrough,size=100Gin daemon.log file :
Code:
VM 102 qmp command failed - VM 102 qmp command 'guest-network-get-interfaces' failed - got timeout
