VM doesn't boot - Status: internal-error

squared

New Member
Oct 25, 2012
2
0
1
Hello,

I've got two separate servers with proxmox, no cluster, both updated to the latest version (2.2).

I moved manually a VM (w2008r2) qcow2 disk from server A to B, created a VM with the same configuration and every single time that starts it hangs. Web interface summary status of the VM shows "internal-error". The VM keeps on using 7MB of RAM the remote console keeps in black forever after the bios post.

Disabling the KVM hardware virtualization the VM boots but get a windows blue screen. VT-x is enabled in the bios.
I've tried to install a new windows using KVM virtualization just to make sure isn't a hardware virtualization problem and it boots fine!

This qcow2 was converted a month ago from a ESXi vmdk using qemu-img. I've converted the original vmdk to qcow2 again, on server A boots on B not!

Are there some KVM logs I can take a look to? Any clue on what could be the problem?

Thanks!

Server AServer B
pve-manager: 2.2-24 (pve-manager/2.2/7f9cfa4c)
running kernel: 2.6.32-16-pve
proxmox-ve-2.6.32: 2.2-80
pve-kernel-2.6.32-11-pve: 2.6.32-66
pve-kernel-2.6.32-16-pve: 2.6.32-80
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.4-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.93-1
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.9-1
pve-cluster: 1.0-28
qemu-server: 2.0-62
pve-firmware: 1.0-21
libpve-common-perl: 1.0-36
libpve-access-control: 1.0-25
libpve-storage-perl: 2.0-34
vncterm: 1.0-3
vzctl: 4.0-1pve2
vzprocps: 2.0.11-2
vzquota: 3.1-1
pve-qemu-kvm: 1.2-7
ksm-control-daemon: 1.1-1
pve-manager: 2.2-24 (pve-manager/2.2/7f9cfa4c)
running kernel: 2.6.32-16-pve
proxmox-ve-2.6.32: 2.2-80
pve-kernel-2.6.32-11-pve: 2.6.32-66
pve-kernel-2.6.32-16-pve: 2.6.32-80
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.4-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.93-1
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.9-1
pve-cluster: 1.0-28
qemu-server: 2.0-62
pve-firmware: 1.0-21
libpve-common-perl: 1.0-36
libpve-access-control: 1.0-25
libpve-storage-perl: 2.0-34
vncterm: 1.0-3
vzctl: 4.0-1pve2
vzprocps: 2.0.11-2
vzquota: 3.1-1
pve-qemu-kvm: 1.2-7
ksm-control-daemon: 1.1-1
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!