VE 7 fresh install: cannot access web UI

B

beerandpork

New Member
Oct 4, 2021
4
1
1
43
Ok so I bought a new NUC 11 gen and installed Proxmox from a USB stick. Configured IP to 192.168.1.190, gateway 192.168.1.1, DNS 8.8.8.8, hostname proxmox.mydomain.com

Can't access the web UI from the browser on my laptop (tried both Firefox and Chrome. laptop is on the same network as the proxmox machine). Trying to curl http://192.168.1.190:8006/ directly gives an empty response:

Code: 
~ curl -kv http://192.168.1.190:8006/
*   Trying 192.168.1.190...
* TCP_NODELAY set
* Connected to 192.168.1.190 (192.168.1.190) port 8006 (#0)
> GET / HTTP/1.1
> Host: 192.168.1.190:8006
> User-Agent: curl/7.64.1
> Accept: */*
>
* Empty reply from server
* Connection #0 to host 192.168.1.190 left intact
curl: (52) Empty reply from server
* Closing connection 0


I can SSH into the machine just fine, however.

- Once I'm in, ` curl -k https://localhost:8006` returns a valid-looking html response.
- I can ping my laptop's IP address from the proxmox server.
- nmap doesn't show 8006 as an open port
- I double checked, and this is the only machine using this IP address on my network (Unifi DreamMachine). I set it to a fixed IP fwiw
- Restarting `systemctl restart pveproxy.service` does not help

Versions:
Code: 
 pveversion -v
proxmox-ve: 7.0-2 (running kernel: 5.11.22-4-pve)
pve-manager: 7.0-11 (running version: 7.0-11/63d82f4e)
pve-kernel-5.11: 7.0-7
pve-kernel-helper: 7.0-7
pve-kernel-5.11.22-4-pve: 5.11.22-8
ceph-fuse: 15.2.14-pve1
corosync: 3.1.2-pve2
criu: 3.15-1+pve-1
glusterfs-client: 9.2-1
ifupdown2: 3.1.0-1+pmx3
ksm-control-daemon: 1.4-1
libjs-extjs: 7.0.0-1
libknet1: 1.21-pve1
libproxmox-acme-perl: 1.3.0
libproxmox-backup-qemu0: 1.2.0-1
libpve-access-control: 7.0-4
libpve-apiclient-perl: 3.2-1
libpve-common-perl: 7.0-6
libpve-guest-common-perl: 4.0-2
libpve-http-server-perl: 4.0-2
libpve-storage-perl: 7.0-10
libspice-server1: 0.14.3-2.1
lvm2: 2.03.11-2.1
lxc-pve: 4.0.9-4
lxcfs: 4.0.8-pve2
novnc-pve: 1.2.0-3
proxmox-backup-client: 2.0.9-2
proxmox-backup-file-restore: 2.0.9-2
proxmox-mini-journalreader: 1.2-1
proxmox-widget-toolkit: 3.3-6
pve-cluster: 7.0-3
pve-container: 4.0-9
pve-docs: 7.0-5
pve-edk2-firmware: 3.20200531-1
pve-firewall: 4.2-2
pve-firmware: 3.3-1
pve-ha-manager: 3.3-1
pve-i18n: 2.5-1
pve-qemu-kvm: 6.0.0-3
pve-xtermjs: 4.12.0-1
qemu-server: 7.0-13
smartmontools: 7.2-1
spiceterm: 3.2-2
vncterm: 1.7-1
zfsutils-linux: 2.0.5-pve1
 
I don't see anything relevant in the logs but I'm also not used to looking at logs like this. Maybe this is suspicious?
Code: 
 /bin/mv: cannot stat '/etc/network/interfaces.new': No such file or directory
 

Attachments

Code: 
root@proxmox:~# cat /etc/network/interfaces
auto lo
iface lo inet loopback

iface enp88s0 inet manual

auto vmbr0
iface vmbr0 inet static
    address 192.168.1.190/24
    gateway 192.168.1.1
    bridge-ports enp88s0
    bridge-stp off
    bridge-fd 0

iface wlo1 inet manual
root@proxmox:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp88s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master vmbr0 state UP group default qlen 1000
    link/ether 1c:69:7a:a5:33:dc brd ff:ff:ff:ff:ff:ff
3: wlo1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 64:bc:58:f9:44:d5 brd ff:ff:ff:ff:ff:ff
    altname wlp0s20f3
4: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 1c:69:7a:a5:33:dc brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.190/24 scope global vmbr0
       valid_lft forever preferred_lft forever
    inet6 fe80::1e69:7aff:fea5:33dc/64 scope link 
       valid_lft forever preferred_lft forever
 
You must log in or register to reply here.
Top Bottom