Using Fence SNMP APC PDU

[francisco.]

Dear forum,

I am trying to set up fence devices with 2 rack pdu and cannot get a simple "status".

Rack PDU model: Minuteman RPM1581HVN

#snmpwalk -c $COMMUNITY -v 1 $IP
iso.3.6.1.2.1.1.1.0 = STRING: "RPM"
iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.17420
iso.3.6.1.2.1.1.3.0 = Timeticks: (786120227) 90 days, 23:40:02.27
iso.3.6.1.2.1.1.4.0 = STRING: "X"
iso.3.6.1.2.1.1.5.0 = STRING: "PDU1"
iso.3.6.1.2.1.1.6.0 = STRING: "X"
iso.3.6.1.2.1.1.7.0 = INTEGER: 7

Cannot get nothing with fence_apc_snmp.

#fence_apc_snmp -a $IP -n 1 -d 1 -c $COMMUNITY -o status
Traceback (most recent call last):
File "/usr/sbin/fence_apc_snmp", line 209, in <module>
main()
File "/usr/sbin/fence_apc_snmp", line 205, in main
result = fence_action(FencingSnmp(options), options, set_power_status, get_power_status, get_outlets_status)
File "/usr/share/fence/fencing.py", line 880, in fence_action
status = get_multi_power_fn(tn, options, get_power_fn)
File "/usr/share/fence/fencing.py", line 800, in get_multi_power_fn
plug_status = get_power_fn(tn, options)
File "/usr/sbin/fence_apc_snmp", line 138, in get_power_status
apc_resolv_port_id(conn, options)
File "/usr/sbin/fence_apc_snmp", line 113, in apc_resolv_port_id
apc_set_device(conn)
File "/usr/sbin/fence_apc_snmp", line 107, in apc_set_device
conn.log_command("Trying %s"%(device.ident_str))
AttributeError: FencingSnmp instance has no attribute 'log_command'

What is happening? Is this command no compatible with Minuteman?

Regards.

 

[francisco.]

Upp

 

[francisco.]

Any ideas about this? :S

 

[francisco.]

upp