On my nodes i have this
enp0s31f6 -> vmbr0 -> vmbr0.16 Proxmox Management network
vmbr0.1000 Cluster network
SDN -> lzone
Network is a VLAN SDN zone
i have working VNET on lzone
e.g.
lnet10 - VLAN 10
lnet20 - VLAN 20
Attached to this zone, which is able to communicate with devices across the network including physical devices.
However when creating lnet16 - VLAN 16, that node that it gets applied to is no longer reachable on the Management network, luckily i can still access it from the Cluster network and undo the changes.
I assume when is creates the lnet16 interface, it would need to create vmbr0.16, and therefore overwrite my own vmbr0.16 config.
Does anyone know how i can get this to work?
enp0s31f6 -> vmbr0 -> vmbr0.16 Proxmox Management network
vmbr0.1000 Cluster network
SDN -> lzone
Network is a VLAN SDN zone
i have working VNET on lzone
e.g.
lnet10 - VLAN 10
lnet20 - VLAN 20
Attached to this zone, which is able to communicate with devices across the network including physical devices.
However when creating lnet16 - VLAN 16, that node that it gets applied to is no longer reachable on the Management network, luckily i can still access it from the Cluster network and undo the changes.
I assume when is creates the lnet16 interface, it would need to create vmbr0.16, and therefore overwrite my own vmbr0.16 config.
Does anyone know how i can get this to work?
Code:
# network interface settings; autogenerated
# Please do NOT modify this file directly, unless you know what
# you're doing.
#
# If you want to manage parts of the network configuration manually,
# please utilize the 'source' or 'source-directory' directives to do
# so.
# PVE will preserve these directives, but will NOT read its network
# configuration from sourced files, so do not attempt to move any of
# the PVE managed interfaces into external files!
auto lo
iface lo inet loopback
iface enp0s31f6 inet manual
mtu 9000
#Root
auto vmbr0
iface vmbr0 inet manual
bridge-ports enp0s31f6
bridge-stp off
bridge-fd 0
bridge-vlan-aware yes
bridge-vids 2-4094
mtu 9000
iface wlp4s0 inet manual
auto vmbr0.1000
iface vmbr0.1000 inet static
address 10.12.0.15/24
mtu 9000
#Storage Net
auto vmbr0.17
iface vmbr0.17 inet static
address 10.11.0.15/22
mtu 9000
#Ceph Public
auto vmbr16
iface vmbr16 inet static
address 10.10.0.15/22
gateway 10.10.0.1
bridge-ports vmbr0.16
bridge-stp off
bridge-fd 0
mtu 9000
source /etc/network/interfaces.d/*
Code:
#version:19
auto lnet10
iface lnet10
bridge_ports vmbr0.10
bridge_stp off
bridge_fd 0
mtu 9000
auto lnet16
iface lnet16
bridge_ports vmbr0.16
bridge_stp off
bridge_fd 0
mtu 9000
auto lnet20
iface lnet20
bridge_ports vmbr0.20
bridge_stp off
bridge_fd 0
mtu 9000