I'm trying to setup an Asterisk 1.6 PBX in a Centos KVM.
I've plugged the USB-FXO U100 into the proxmox server:
Bus 003 Device 003: ID 10c4:8461 Cygnal Integrated Products, Inc.
And have the "hostusb: 10c4:8461" entry in the qemu config file.
in the KVM, I can see the USB device, however when I try to start wanrouter it fails.
# wanrouter start
Starting up device: wanpipe1
wanconfig: WAN device wanpipe1 driver load failed !!
: ioctl(wanpipe1,ROUTER_SETUP) failed:
: 22 - Invalid argument
Wanpipe driver did not load properly
Please check /var/log/wanrouter and
/var/log/messages for errors
Configuring interfaces: w1g1 w1g1: unknown interface: No such device
seems like Proxmox is not routing all the USB stuff quite right...
--Guy
I've plugged the USB-FXO U100 into the proxmox server:
Bus 003 Device 003: ID 10c4:8461 Cygnal Integrated Products, Inc.
And have the "hostusb: 10c4:8461" entry in the qemu config file.
in the KVM, I can see the USB device, however when I try to start wanrouter it fails.
# wanrouter start
Starting up device: wanpipe1
wanconfig: WAN device wanpipe1 driver load failed !!
: ioctl(wanpipe1,ROUTER_SETUP) failed:
: 22 - Invalid argument
Wanpipe driver did not load properly
Please check /var/log/wanrouter and
/var/log/messages for errors
Configuring interfaces: w1g1 w1g1: unknown interface: No such device
seems like Proxmox is not routing all the USB stuff quite right...
--Guy