USB Drive missing in fdisk

maikai

New Member
Jul 13, 2023
5
0
1
Hi,

I have an NTFS external USB drive that i want to use. Once plugged into my server, the VMs within PVE can see and use the drive but unable to add as storage in the node.

I checked with lsusb, the drive is there but missing in fdisk. I ran dmesg and this is the results. Please advise.

[46048.085049] usb 2-2: USB disconnect, device number 2
[46057.488583] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
[46057.509683] usb 2-2: New USB device found, idVendor=067b, idProduct=2773, bcdDevice= 1.00
[46057.509687] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[46057.509689] usb 2-2: Product: USB-SATA Bridge
[46057.509690] usb 2-2: Manufacturer: Xiaobi Technology Inc.
[46057.509691] usb 2-2: SerialNumber: 0000000000000000001
[46057.511121] usb-storage 2-2:1.0: USB Mass Storage device detected
[46057.511371] scsi host2: usb-storage 2-2:1.0
[46058.546088] scsi 2:0:0:0: Direct-Access WDC WD20 EZRX-00DC0B0 80.0 PQ: 0 ANSI: 0
[46058.546318] sd 2:0:0:0: Attached scsi generic sg0 type 0
[46058.546685] sd 2:0:0:0: [sda] 3907027055 512-byte logical blocks: (2.00 TB/1.82 TiB)
[46058.546979] sd 2:0:0:0: [sda] Write Protect is off
[46058.546981] sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
[46058.547272] sd 2:0:0:0: [sda] No Caching mode page found
[46058.547276] sd 2:0:0:0: [sda] Assuming drive cache: write through
[46058.569932] sda: sda1 sda2 sda3
[46058.570261] sd 2:0:0:0: [sda] Attached SCSI disk
[46058.980990] usb 2-2: reset SuperSpeed USB device number 3 using xhci_hcd