Upgrade from beta1 problem using apt-get

[yena]

I have noticed this error:

Restarting PVE Status Daemon: pvestatd.
Syntax error on line 13 of /etc/apache2/sites-enabled/pve-redirect.conf:
SSLCertificateFile: file '/etc/pve/local/pve-ssl.pem' does not exist or is empty
Action 'configtest' failed.
The Apache error log may have more information.
failed!
invoke-rc.d: initscript apache2, action "restart" failed.
dpkg: error processing pve-manager (--unpack):
subprocess installed post-installation script returned error exit status 1
configured to not write apport reports
Errors were encountered while processing:
pve-manager
E: Sub-process /usr/bin/dpkg returned an error code (1)

 

[tom]

pls show the full command you run and provide the full log.

 

[lweidig]

Yes, the upgrade has taken my system down as well! I ran the suggested "aptitude update && aptitude dist-upgrade" command. Here is the aptitude log:

Aptitude 0.6.3: log report
Fri, Nov 18 2011 12:21:24 -0600

IMPORTANT: this log only lists intended actions; actions which fail due to
dpkg problems may not be completed.

Will install 3 packages, and remove 111 packages.
70.9 MB of disk space will be freed
===============================================================================
[REMOVE, NOT USED] apache2
[REMOVE, NOT USED] bridge-utils
[REMOVE, NOT USED] clvm
[REMOVE, NOT USED] corosync-pve
[REMOVE, NOT USED] defoma
[REMOVE, NOT USED] fontconfig
[REMOVE, NOT USED] fontconfig-config
[REMOVE, NOT USED] fuse-utils
[REMOVE, NOT USED] ifenslave-2.6
[REMOVE, NOT USED] libaio1
[REMOVE, NOT USED] libapache2-mod-apreq2
[REMOVE, NOT USED] libapache2-mod-perl2
[REMOVE, NOT USED] libapache2-reload-perl
[REMOVE, NOT USED] libapache2-request-perl
[REMOVE, NOT USED] libapreq2
[REMOVE, NOT USED] libasound2
[REMOVE, NOT USED] libauthen-pam-perl
[REMOVE, NOT USED] libbsd-resource-perl
[REMOVE, NOT USED] libcairo2
[REMOVE, NOT USED] libcommon-sense-perl
[REMOVE, NOT USED] libconvert-asn1-perl
[REMOVE, NOT USED] libcorosync4-pve
[REMOVE, NOT USED] libcrypt-openssl-bignum-perl
[REMOVE, NOT USED] libcrypt-openssl-random-perl
[REMOVE, NOT USED] libcrypt-openssl-rsa-perl
[REMOVE, NOT USED] libdatrie1
[REMOVE, NOT USED] libdbi0
[REMOVE, NOT USED] libdevel-cycle-perl
[REMOVE, NOT USED] libdevel-symdump-perl
[REMOVE, NOT USED] libdigest-hmac-perl
[REMOVE, NOT USED] libdigest-sha1-perl
[REMOVE, NOT USED] libdirectfb-1.2-9
[REMOVE, NOT USED] libfile-readbackwards-perl
[REMOVE, NOT USED] libfile-sync-perl
[REMOVE, NOT USED] libfilesys-df-perl
[REMOVE, NOT USED] libfont-afm-perl
[REMOVE, NOT USED] libfont-freetype-perl
[REMOVE, NOT USED] libfontconfig1
[REMOVE, NOT USED] libfontenc1
[REMOVE, NOT USED] libfuse2
[REMOVE, NOT USED] libglib2.0-0
[REMOVE, NOT USED] libglib2.0-data
[REMOVE, NOT USED] libhtml-format-perl
[REMOVE, NOT USED] libhtml-parser-perl
[REMOVE, NOT USED] libhtml-tagset-perl
[REMOVE, NOT USED] libhtml-tree-perl
[REMOVE, NOT USED] libintl-perl
[REMOVE, NOT USED] libio-socket-ssl-perl
[REMOVE, NOT USED] libio-stringy-perl
[REMOVE, NOT USED] libjson-perl
[REMOVE, NOT USED] libjson-xs-perl
[REMOVE, NOT USED] liblinux-inotify2-perl
[REMOVE, NOT USED] libmailtools-perl
[REMOVE, NOT USED] libnet-dns-perl
[REMOVE, NOT USED] libnet-ip-perl
[REMOVE, NOT USED] libnet-ldap-perl
[REMOVE, NOT USED] libnet-libidn-perl
[REMOVE, NOT USED] libnet-ssleay-perl
[REMOVE, NOT USED] libnspr4-0d
[REMOVE, NOT USED] libnss3-1d
[REMOVE, NOT USED] libopenais3-pve
[REMOVE, NOT USED] libpango1.0-0
[REMOVE, NOT USED] libpango1.0-common
[REMOVE, NOT USED] libperl5.10
[REMOVE, NOT USED] libpixman-1-0
[REMOVE, NOT USED] libpve-access-control
[REMOVE, NOT USED] libpve-common-perl
[REMOVE, NOT USED] libpve-storage-perl
[REMOVE, NOT USED] libqb
[REMOVE, NOT USED] librrd4
[REMOVE, NOT USED] librrds-perl
[REMOVE, NOT USED] libsdl1.2debian
[REMOVE, NOT USED] libsdl1.2debian-alsa
[REMOVE, NOT USED] libsvga1
[REMOVE, NOT USED] libsysfs2
[REMOVE, NOT USED] libterm-readline-gnu-perl
[REMOVE, NOT USED] libthai-data
[REMOVE, NOT USED] libthai0
[REMOVE, NOT USED] libtimedate-perl
[REMOVE, NOT USED] libts-0.0-0
[REMOVE, NOT USED] liburi-perl
[REMOVE, NOT USED] libvncserver0
[REMOVE, NOT USED] libwww-perl
[REMOVE, NOT USED] libx86-1
[REMOVE, NOT USED] libxcb-render-util0
[REMOVE, NOT USED] libxcb-render0
[REMOVE, NOT USED] libxfont1
[REMOVE, NOT USED] libxft2
[REMOVE, NOT USED] libxml2-utils
[REMOVE, NOT USED] libxrender1
[REMOVE, NOT USED] openais-pve
[REMOVE, NOT USED] pve-cluster
[REMOVE, NOT USED] pve-firmware
[REMOVE, NOT USED] pve-qemu-kvm
[REMOVE, NOT USED] qemu-server
[REMOVE, NOT USED] redhat-cluster-pve
[REMOVE, NOT USED] rrdcached
[REMOVE, NOT USED] shared-mime-info
[REMOVE, NOT USED] sqlite3
[REMOVE, NOT USED] tsconf
[REMOVE, NOT USED] ttf-dejavu
[REMOVE, NOT USED] ttf-dejavu-core
[REMOVE, NOT USED] ttf-dejavu-extra
[REMOVE, NOT USED] vlan
[REMOVE, NOT USED] vncterm
[REMOVE, NOT USED] x-ttcidfont-conf
[REMOVE, NOT USED] x11-common
[REMOVE, NOT USED] xfonts-encodings
[REMOVE, NOT USED] xfonts-utils
[REMOVE, DEPENDENCIES] proxmox-ve-2.6.32
[REMOVE, DEPENDENCIES] pve-manager
[UPGRADE] pve-headers-2.6.32-6-pve 2.6.32-46 -> 2.6.32-52
[UPGRADE] pve-kernel-2.6.32-6-pve 2.6.32-46 -> 2.6.32-52
[UPGRADE] vzctl 3.0.29-3pve2 -> 3.0.29-3pve3
===============================================================================

Log complete.

After reboot get errors about apache not starting (well, appears to have removed it).

UPDATE: While the automatic update bombed, reinstalling seems to be fine.