A while back I did my first PVE install on a mini PC with four Intel i226V Ethernet ports. They weren't supported by the current PVE kernel but somehow I managed to put in a custom kernel. Today I tried to update from PVE 7 to 8. The default kernel wouldn't update and then the system would hang on reboot. It works now after a manual choice on boot (5.19), but that's not a good choice for a headless server. Point being, I need to either fix this so I can sucessfully boot from the new kernel or pull my VM snapshots from my NAS after a complete reinstall.
Here's my output from pve7to8
I wouldn't mind killing the cluster as I only have one other reliable system and the Synology NAS' VM is flaky and unreliable. I see there's a long list of packages to be upgraded. When I run apt upgrade it tries to upgrade but fails on the kernel. Here's the snippet:
I tried to blindly install the above packages but either one errored out with
What did I do wrong? Would it be easier to do a fresh install and reinstall my 3 VMs from the snapshots on the NFS share/Synology NAS?
Here's my output from pve7to8
Code:
root@pve1:~# pve7to8
= CHECKING VERSION INFORMATION FOR PVE PACKAGES =
Checking for package updates..
WARN: updates for the following packages are available:
dpkg, fontconfig, telnet, inetutils-telnet, librados2, libfmt9, liblttng-ust1, libssl3, cifs-utils, libssh2-1, libssl3, tcpdump, libssl3, dmidecode, libcups2, libwrap0, libxtables12, libcurl4, libldap-2.5-0, libssl3, dmeventd, libgomp1, libpulse0, libx11-xcb1, libsmartcols1, zstd, udev, coreutils, libgdbm-compat4, libnetaddr-ip-perl, ceph-fuse, libfmt9, hdparm, libext2fs2, bind9-host, pciutils, libnftnl11, libgssapi-krb5-2, libnet-ssleay-perl, libssl3, libcurl3-gnutls, libldap-2.5-0, open-iscsi, libssl3, openssh-client, libssl3, iptables, python3-samba, libpython3.11, iputils-ping, fdutils, libglusterfs0, libssl3, libpve-rs-perl, libssl3, libauthen-pam-perl, libnl-3-200, libgfapi0, apt, corosync, libtemplate-perl, libtsan0, gcc-11-base, cpp, cpp-12, libnftables1, g++, g++-12, gcc-12, libfuse2, gcc, gcc-12, cryptsetup-bin, libacl1, gpg, perl, perl-modules-5.36, libperl5.36, libtinfo6, rrdcached, zfs-zed, libunwind8, bridge-utils, libldb2, libldap-2.5-0, libmagic-mgc, libpcre3, libpango-1.0-0, libunistring2, libtevent0, kbd, python3-cffi-backend, libffi8, proxmox-websocket-tunnel, libssl3, python3-minimal, chrony, libpam-systemd, samba-vfs-modules, liburing2, busybox, libleveldb1d, nmap-common, libnl-route-3-200, libqt5core5a, libicu72, zfs-initramfs, libselinux1, libarchive13, python3-lib2to3, liblzma5, sed, lsb-base, ssh, pve-qemu-kvm, liburing2, tar, proxmox-mail-forward, libssl3, libgfrpc0, libavahi-common-data, libcap2-bin, whiptail, base-passwd, libpve-cluster-api-perl, libsasl2-2, libcairo2, libgbm1, xxd, python3-ceph-common, libibverbs1, librbd1, libfmt9, liblttng-ust1, libssl3, pve-ha-manager, libpve-notify-perl, grub-pc-bin, libdb5.3, libbinutils, libfakeroot, libp11-kit0, libffi8, libapt-pkg6.0, procmail, lxcfs, swtpm-libs, libssl3, pve-lxc-syscalld, libposix-strptime-perl, apparmor, libproxmox-backup-qemu0, libssl3, swtpm-tools, libssl3, librgw2, libicu72, libldap-2.5-0, libssl3, libthrift-0.17.0, libfido2-1, libcbor0.8, libssl3, kmod, libssl3, libuutil3linux, libwayland-server0, libffi8, libopts25, libmagic1, liblua5.3-0, librrds-perl, faketime, libpve-storage-perl, ceph-common, libfmt9, libicu72, libldap-2.5-0, libssl3, libthrift-0.17.0, vim-common, liblvm2cmd2.03, libip4tc2, libsystemd0, libqt5network5, libssl3, libfreetype6, libmount1, nfs-common, libevent-core-2.1-7, libnfsidmap1, samba, libldap-2.5-0, libzpool5linux, librrd8, binutils-x86-64-linux-gnu, libgprofng0, file, bzip2, genisoimage, libpipeline1, libnss-systemd, debianutils, libpopt0, libcrypt-openssl-bignum-perl, libssl3, libpve-guest-common-perl, libslirp0, logrotate, libapparmor1, libwbclient0, vncterm, libnuma1, xfsprogs, libicu72, liburcu8, python3, python3.11, openssh-server, libssl3, libdbus-1-3, libqt5dbus5, gnupg, gpg-wks-server, libkrb5support0, libsmbclient, swtpm, libxml2, libicu72, wireguard-tools, pve-cluster, fuse, xz-utils, libzstd1, util-linux, util-linux-extra, libbsd0, less, libxpm4, libfontconfig1, libgpgme11, psmisc, libasound2, systemd, libsystemd-shared, libproxmox-rs-perl, samba-dsdb-modules, libudev1, gpg-agent, libcrypt-openssl-rsa-perl, libssl3, libgpg-error0, cstream, wget, nvme-cli, libnvme1, shared-mime-info, liblocale-gettext-perl, fdisk, libspice-server1, libssl3, libreadline8, proxmox-ve, proxmox-default-kernel, python3-pycurl, lxc-pve, libgnutlsxx30, gettext-base, libmaxminddb0, samba-common-bin, libldap-2.5-0, diffutils, strace, libfdisk1, gdisk, librdkafka1, libssl3, libassuan0, python3-talloc, libpython3.11, eject, usbutils, attr, lshw, lsof, libcap2, proxmox-backup-file-restore, libssl3, libfile-fcntllock-perl, libfuse3-3, python3-cephfs, lvm2, libc6, locales, dpkg-dev, libasan6, gcc-11-base, libpcap0.8, libpcre2-16-0, libpangocairo-1.0-0, libcrypt-openssl-random-perl, libssl3, libcephfs2, libfmt9, libkrb5-3, libssl3, libpam-modules, ifupdown2, python3-systemd, ethtool, pve-xtermjs, proxmox-termproxy, tdb-tools, python3-openssl, man-db, qemu-server, libcommon-sense-perl, gpgv, libtext-charwidth-perl, libpve-access-control, libuuid-perl, bash, traceroute, pve-container, libgcrypt20, isc-dhcp-client, grep, libcpg4, libfaketime, libstatgrab10, uuid-runtime, libipset13, libcap-ng0, vim-tiny, libgfchangelog0, libctf0, bind9-dnsutils, libasyncns0, libnss3, libfilesys-df-perl, rsyslog, libk5crypto3, libpangoft2-1.0-0, ncurses-base, gzip, keyutils, libtdb1, python3-apt, dmsetup, libsndfile1, libflac12, libmp3lame0, libmpg123-0, login, libtpms0, libssl3, libqb100, gnutls-bin, rpcbind, libcrypt-ssleay-perl, libssl3, libsqlite3-0, libevent-2.1-7, hostname, rsync, libssl3, pinentry-curses, python3-gpg, libjson-c5, libopeniscsiusr, gpgsm, glusterfs-common, libssl3, liburcu8, libhtml-parser-perl, libterm-readline-gnu-perl, python3-markupsafe, libxslt1.1, libunbound8, libradosstriper1, libfmt9, proxmox-backup-client, libssl3, libdevmapper-event1.02.1, libcrypt-dev, libcryptsetup12, libssl3, libasound2-data, findutils, python3-ldb, libpython3.11, libip6tc2, libpcre2-8-0, libcrypt1, libgstreamer1.0-0, libavahi-common3, binutils-common, libitm1, libpam-modules-bin, perl-openssl-defaults, libssl3, liblinux-inotify2-perl, init-system-helpers, usrmerge, grub-efi-amd64-bin, grub2-common, thin-provisioning-tools, libsemanage-common, proxmox-mini-journalreader, smartmontools, python3-rbd, python3-rgw, smbclient, python3-protobuf, libprotobuf32, uidmap, libsubid4, libpve-http-server-perl, procps, libproc2-0, python3-tdb, libdpkg-perl, python3-markdown, libpython3-stdlib, libpython3.11-stdlib, libc-dev-bin, mount, libglib2.0-0, libffi8, pve-manager, fonts-font-logos, libpve-notify-perl, python3-yaml, libpve-common-perl, perl-base, openssh-sftp-server, libpam0g, nano, btrfs-progs, grub-common, bind9-libs, libjemalloc2, libssl3, liboath0, libdrm2, samba-libs, libicu72, libldap-2.5-0, sudo, libu2f-server0, libssl3, libc-bin, ipset, libc-devtools, glusterfs-client, librabbitmq4, libssl3, librados2-perl, python3-distutils, libattr1, efibootmgr, libaudit1, libkmod2, libssl3, libclone-perl, ebtables, libyaml-libyaml-perl, bsd-mailx, nmap, libssl3, libc6-dev, rpcsvc-proto, parted, cpio, dirmngr, libldap-2.5-0, libzfs4linux, libssl3, socat, libssl3, libksba8, libharfbuzz0b, libtext-iconv-perl, libisns0, libssl3, criu, samba-common, cron, apt-utils, gnupg-utils, libblkid1, libgnutls30, curl, libubsan1, libslang2, liblsan0, libargon2-1, sysvinit-utils, logsave, libvirglrenderer1, libva-drm2, libva2, libvulkan1, libalgorithm-diff-xs-perl, libhttp-message-perl, pve-firewall, libjson-xs-perl, gnupg-l10n, libdw1, librdmacm1, gpg-wks-client, libpci3, libgd3, libavif15, libheif1, libtiff6, libwebp7, libxml-parser-perl, libncursesw6, sqlite3, python3-cryptography, libssl3, ncurses-bin, libbz2-1.0, libnozzle1, time, libx11-6, libgstreamer-plugins-base1.0-0, libsqlite3-mod-ceph, libfmt9, libanyevent-perl, python3-ceph-argparse, libelf1, groff-base, libmd0, ncurses-term, libnet-dbus-perl, dash, libtirpc3, libtalloc2, dbus, wireguard, libknet1, libssl3, libedit2, grub-pc, libpve-u2f-server-perl, bsdutils, iproute2, libbpf1, libavahi-client3, gpgconf, libdevmapper1.02.1, libgnutls-dane0, libxml-libxml-perl, libfstrm0, libss2, libtirpc-dev, libnewt0.52, spiceterm, libgdbm6, binutils, libuv1, fakeroot, libpsl5, bsdextrautils, libstdc++6, libbabeltrace1, libncurses6, zfsutils-linux, libssl3, postfix, libicu72, libssl3, libparted2, openssl, libssl3, e2fsprogs, passwd, libsemanage2, libpve-cluster-perl, python3-rados, libapt-pkg-perl, nftables, libnspr4, libgcc-s1
Checking proxmox-ve package version..
PASS: proxmox-ve package has version >= 7.4-1
Checking running kernel version..
WARN: a suitable kernel (pve-kernel-5.15) is intalled, but an unsuitable (5.19.17-2-pve) is booted, missing reboot?!
= CHECKING CLUSTER HEALTH/SETTINGS =
PASS: systemd unit 'pve-cluster.service' is in state 'active'
PASS: systemd unit 'corosync.service' is in state 'active'
PASS: Cluster Filesystem is quorate.
Analzying quorum settings and state..
INFO: configured votes - nodes: 3
INFO: configured votes - qdevice: 0
INFO: current expected votes: 3
INFO: current total votes: 3
Checking nodelist entries..
PASS: nodelist settings OK
Checking totem settings..
PASS: totem settings OK
INFO: run 'pvecm status' to get detailed cluster status..
= CHECKING HYPER-CONVERGED CEPH STATUS =
SKIP: no hyper-converged ceph setup detected!
= CHECKING CONFIGURED STORAGES =
storage 'synology' is not online
PASS: storage 'local' enabled and active.
PASS: storage 'local-lvm' enabled and active.
WARN: storage 'synology' enabled but not active!
INFO: Checking storage content type configuration..
PASS: no storage content problems found
WARN: activating 'synology' failed - storage 'synology' is not online
PASS: no storage re-uses a directory for multiple content types.
= MISCELLANEOUS CHECKS =
INFO: Checking common daemon services..
PASS: systemd unit 'pveproxy.service' is in state 'active'
PASS: systemd unit 'pvedaemon.service' is in state 'active'
PASS: systemd unit 'pvescheduler.service' is in state 'active'
PASS: systemd unit 'pvestatd.service' is in state 'active'
INFO: Checking for supported & active NTP service..
PASS: Detected active time synchronisation unit 'chrony.service'
INFO: Checking for running guests..
WARN: 3 running guest(s) detected - consider migrating or stopping them.
INFO: Checking if the local node's hostname 'pve1' is resolvable..
INFO: Checking if resolved IP is configured on local node..
PASS: Resolved node IP '192.168.1.20' configured and active on single interface.
INFO: Check node certificate's RSA key size
PASS: Certificate 'pve-root-ca.pem' passed Debian Busters (and newer) security level for TLS connections (4096 >= 2048)
PASS: Certificate 'pve-ssl.pem' passed Debian Busters (and newer) security level for TLS connections (2048 >= 2048)
INFO: Checking backup retention settings..
PASS: no backup retention problems found.
INFO: checking CIFS credential location..
PASS: no CIFS credentials at outdated location found.
INFO: Checking permission system changes..
INFO: Checking custom role IDs for clashes with new 'PVE' namespace..
PASS: no custom roles defined, so no clash with 'PVE' role ID namespace enforced in Proxmox VE 8
INFO: Checking if LXCFS is running with FUSE3 library, if already upgraded..
SKIP: not yet upgraded, no need to check the FUSE library version LXCFS uses
INFO: Checking node and guest description/note length..
PASS: All node config descriptions fit in the new limit of 64 KiB
PASS: All guest config descriptions fit in the new limit of 8 KiB
INFO: Checking container configs for deprecated lxc.cgroup entries
PASS: No legacy 'lxc.cgroup' keys found.
INFO: Checking if the suite for the Debian security repository is correct..
PASS: found no suite mismatch
INFO: Checking for existence of NVIDIA vGPU Manager..
PASS: No NVIDIA vGPU Service found.
INFO: Checking bootloader configuration...
SKIP: not yet upgraded, no need to check the presence of systemd-boot
INFO: Check for dkms modules...
/sbin/dkms: line 2497: echo: write error: Broken pipe
WARN: dkms modules found, this might cause issues during upgrade.
SKIP: NOTE: Expensive checks, like CT cgroupv2 compat, not performed without '--full' parameter
= SUMMARY =
TOTAL: 36
PASSED: 26
SKIPPED: 4
WARNINGS: 6
FAILURES: 0
ATTENTION: Please check the output for detailed information!I wouldn't mind killing the cluster as I only have one other reliable system and the Synology NAS' VM is flaky and unreliable. I see there's a long list of packages to be upgraded. When I run apt upgrade it tries to upgrade but fails on the kernel. Here's the snippet:
Code:
dkms: autoinstall for kernel: 6.5.13-1-pve failed!
run-parts: /etc/kernel/postinst.d/dkms exited with return code 11
Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/proxmox-kernel-6.5.13-1-pve-signed.postinst line 20.
dpkg: error processing package proxmox-kernel-6.5.13-1-pve-signed (--configure):
installed proxmox-kernel-6.5.13-1-pve-signed package post-installation script subprocess returned error exit status 2
dpkg: dependency problems prevent configuration of proxmox-kernel-6.5:
proxmox-kernel-6.5 depends on proxmox-kernel-6.5.13-1-pve-signed | proxmox-kernel-6.5.13-1-pve; however:
Package proxmox-kernel-6.5.13-1-pve-signed is not configured yet.
Package proxmox-kernel-6.5.13-1-pve is not installed.
Package proxmox-kernel-6.5.13-1-pve-signed which provides proxmox-kernel-6.5.13-1-pve is not configured yet.I tried to blindly install the above packages but either one errored out with
Code:
Error! The /var/lib/dkms/wireguard/1.0.20210219/6.5.13-1-pve/x86_64/dkms.conf for module wireguard includes a BUILD_EXCLUSIVE directive which does not match this kernel/arch/config.
This indicates that it should not be built.
Error! One or more modules failed to install during autoinstall.
Refer to previous errors for more information.
dkms: autoinstall for kernel: 6.5.13-1-pve failed!
run-parts: /etc/kernel/postinst.d/dkms exited with return code 11
Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/proxmox-kernel-6.5.13-1-pve-signed.postinst line 20.
dpkg: error processing package proxmox-kernel-6.5.13-1-pve-signed (--configure):
installed proxmox-kernel-6.5.13-1-pve-signed package post-installation script subprocess returned error exit status 2
dpkg: dependency problems prevent configuration of proxmox-kernel-6.5:
proxmox-kernel-6.5 depends on proxmox-kernel-6.5.13-1-pve-signed | proxmox-kernel-6.5.13-1-pve; however:
Package proxmox-kernel-6.5.13-1-pve-signed is not configured yet.
Package proxmox-kernel-6.5.13-1-pve is not installed.
Package proxmox-kernel-6.5.13-1-pve-signed which provides proxmox-kernel-6.5.13-1-pve is not configured yet.
dpkg: error processing package proxmox-kernel-6.5 (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
proxmox-kernel-6.5.13-1-pve-signed
proxmox-kernel-6.5
E: Sub-process /usr/bin/dpkg returned an error code (1)What did I do wrong? Would it be easier to do a fresh install and reinstall my 3 VMs from the snapshots on the NFS share/Synology NAS?
