Upgrade from 1.1 to 1.3

I think it upgraded, but could you confirm this is correct... pve-kvm seems to have an error.

fenix:~# pveversion -v
pve-manager: 1.4-6 (pve-manager/1.4/4340)
qemu-server: 1.1-4
pve-kernel: 2.6.24-15
pve-kvm: not correctly installed
pve-firmware: 1
vncterm: 0.9-2
vzctl: 3.0.23-1pve3
vzdump: 1.2-2
vzprocps: 2.0.11-1dso2
vzquota: 3.0.11-1
Click to expand...

fenix:~# uname -a
Linux fenix 2.6.24-8-pve #1 SMP PREEMPT Mon Sep 28 16:25:36 CEST 2009 x86_64 GNU/Linux
Click to expand...
 
fenix:~# uname -a
Linux fenix 2.6.24-7-pve #1 SMP PREEMPT Fri Aug 21 09:07:39 CEST 2009 x86_64 GNU/Linux
fenix:~# pveversion -v
pve-manager: 1.3-1 (pve-manager/1.3/4023)
qemu-server: 1.0-14
pve-kernel: 2.6.24-11
pve-kvm: 86-3
pve-firmware: 1
vncterm: 0.9-2
vzctl: 3.0.23-1pve3
vzdump: 1.1-2
vzprocps: 2.0.11-1dso2
vzquota: 3.0.11-1
Click to expand...
I reinstalled from a 1.3 CD and it ran for a few days. I didn't change anything. I added a VLAN that didn't work, so now I'm back to upgrading it again. It didn't crash after adding the VLAN. I just did an apt-get upgrade. Hopefully it stays on this time.
 
Ideas?

top - 16:12:04 up 5 days, 3:00, 2 users, load average: 10.00, 10.00, 10.00
Tasks: 83 total, 9 running, 74 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.0%us, 33.3%sy, 0.0%ni, 66.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 3909152k total, 2785536k used, 1123616k free, 333068k buffers
Swap: 4194296k total, 0k used, 4194296k free, 1078724k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
18 root 15 -5 0 0 0 R 100 0.0 7361:22 events/3
2959 root 20 0 181m 1792 920 S 0 0.0 0:59.30 rsyslogd
1 root 20 0 10316 748 616 S 0 0.0 0:02.22 init
2 root 15 -5 0 0 0 S 0 0.0 0:00.00 kthreadd
3 root RT -5 0 0 0 S 0 0.0 0:00.02 migration/0
4 root 15 -5 0 0 0 S 0 0.0 0:00.00 ksoftirqd/0
5 root RT -5 0 0 0 S 0 0.0 0:00.08 watchdog/0
6 root RT -5 0 0 0 S 0 0.0 0:00.02 migration/1
7 root 15 -5 0 0 0 S 0 0.0 0:00.00 ksoftirqd/1
8 root RT -5 0 0 0 S 0 0.0 0:00.08 watchdog/1
9 root RT -5 0 0 0 S 0 0.0 0:00.00 migration/2
10 root 15 -5 0 0 0 S 0 0.0 0:00.00 ksoftirqd/2
11 root RT -5 0 0 0 S 0 0.0 0:00.00 watchdog/2
12 root RT -5 0 0 0 S 0 0.0 0:00.00 migration/3
13 root 15 -5 0 0 0 S 0 0.0 0:00.08 ksoftirqd/3
14 root RT -5 0 0 0 R 0 0.0 0:00.00 watchdog/3
15 root 15 -5 0 0 0 S 0 0.0 0:01.18 events/0
Click to expand...
 
I just upgraded to 1.4, since it's stable now. However, it seems to be doing the same thing. events/3 is still using 100% CPU.

The system refuses to complete a restart while this condition exists.
 
Last edited:
As far as I know, there's no way to avoid this condition. I've been battling this for about two months now through a few reinstalls and a few versions (1.3, 1.4B, and 1.4). It didn't exist when I was running 1.1.

I rebooted the machine about an hour ago and I can't get into it. Second time this has happened since I upgraded to 1.4.
 
dietmar said:
I can't reproduce that problem here.
Click to expand...

A Windows KVM that I wasn't ever able to finish installing because of the lockups uses 100% of the CPU core. I can't console in. Every time I try to install Windows, it does the same thing. I can't stop the container. I tell it to restart, and I get this:

top - 12:27:16 up 2:13, 1 user, load average: 28.99, 28.53, 22.84
Tasks: 83 total, 9 running, 74 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.0%us, 33.3%sy, 0.0%ni, 66.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 3909152k total, 1709032k used, 2200120k free, 385132k buffers
Swap: 4194296k total, 0k used, 4194296k free, 560820k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
18 root 15 -5 0 0 0 R 100 0.0 48:05.12 events/3
1 root 20 0 10316 748 616 S 0 0.0 0:01.46 init
2 root 15 -5 0 0 0 S 0 0.0 0:00.00 kthreadd
3 root RT -5 0 0 0 S 0 0.0 0:00.00 migration/0
4 root 15 -5 0 0 0 S 0 0.0 0:00.00 ksoftirqd/0
5 root RT -5 0 0 0 S 0 0.0 0:00.00 watchdog/0
6 root RT -5 0 0 0 S 0 0.0 0:00.00 migration/1
7 root 15 -5 0 0 0 S 0 0.0 0:00.00 ksoftirqd/1
8 root RT -5 0 0 0 S 0 0.0 0:00.00 watchdog/1
9 root RT -5 0 0 0 S 0 0.0 0:00.00 migration/2
10 root 15 -5 0 0 0 S 0 0.0 0:00.00 ksoftirqd/2
11 root RT -5 0 0 0 S 0 0.0 0:00.00 watchdog/2
12 root RT -5 0 0 0 S 0 0.0 0:00.00 migration/3
13 root 15 -5 0 0 0 S 0 0.0 0:00.06 ksoftirqd/3
14 root RT -5 0 0 0 R 0 0.0 0:00.00 watchdog/3
15 root 15 -5 0 0 0 S 0 0.0 0:00.02 events/0
16 root 15 -5 0 0 0 S 0 0.0 0:00.00 events/1
Click to expand...
 
You must log in or register to reply here.
Top Bottom