Hello,
I upgraded my proxmox server :
apt-get update
apt-get dist-upgrade
My proxmox was already in version 4.0
The I restarted it but network failed to start.
See below my network configuration :
auto lo
iface lo inet loopback
iface eth0 inet manual
iface eth1 inet manual
auto bond0
iface bond0 inet manual
slaves eth0 eth1
bond_miimon 100
bond_mode active-backup
auto vmbr0
iface vmbr0 inet static
address 192.168.201.1
netmask 255.255.255.0
gateway 192.168.201.254
bridge_ports bond0
bridge_stp off
bridge_fd 0
My problem is related to the bond0 interface. When I try to start it I have these messages :
bond0 : option mode : unable to set because the bond device has slaves
sh : echo : I/0 error
/etc/network/if-up.d/vzifup-post : 5 : exec : /usr/bin/vzifup-post : not found
run parts : /etc/network/if-up.d/vzifup-post exited with return code 127
Failed to bring up bond0
If I configure the network without the bonding everything is ok.
Any idea ?
Thanks.
I upgraded my proxmox server :
apt-get update
apt-get dist-upgrade
My proxmox was already in version 4.0
The I restarted it but network failed to start.
See below my network configuration :
auto lo
iface lo inet loopback
iface eth0 inet manual
iface eth1 inet manual
auto bond0
iface bond0 inet manual
slaves eth0 eth1
bond_miimon 100
bond_mode active-backup
auto vmbr0
iface vmbr0 inet static
address 192.168.201.1
netmask 255.255.255.0
gateway 192.168.201.254
bridge_ports bond0
bridge_stp off
bridge_fd 0
My problem is related to the bond0 interface. When I try to start it I have these messages :
bond0 : option mode : unable to set because the bond device has slaves
sh : echo : I/0 error
/etc/network/if-up.d/vzifup-post : 5 : exec : /usr/bin/vzifup-post : not found
run parts : /etc/network/if-up.d/vzifup-post exited with return code 127
Failed to bring up bond0
If I configure the network without the bonding everything is ok.
Any idea ?
Thanks.