Hi everybody,
this is a pretty beginner question, but I´m somewhat lost.
I have Proxmox 1.6 runngin, a single NIC on the host with 5 IPs assigned to it,
84.x.x.170-84.x.x.174.
I have some openVZ containers which I can easily assign IPs to.
However now I need a KVM Client running Ubuntu linux, and want to assign
the public IP 84.x.x.174 to it. But all I get when I enter the IP is the proxmox
control panel. Everything is running except no network connection. Any idea what
I am doing wrong?
The VM has vmbr174 connected as realtek ethernet card.
Thanks,
André
This is what my interfaces lookes like on the host
this is a pretty beginner question, but I´m somewhat lost.
I have Proxmox 1.6 runngin, a single NIC on the host with 5 IPs assigned to it,
84.x.x.170-84.x.x.174.
I have some openVZ containers which I can easily assign IPs to.
However now I need a KVM Client running Ubuntu linux, and want to assign
the public IP 84.x.x.174 to it. But all I get when I enter the IP is the proxmox
control panel. Everything is running except no network connection. Any idea what
I am doing wrong?
The VM has vmbr174 connected as realtek ethernet card.
Thanks,
André
This is what my interfaces lookes like on the host
Code:
# network interface settings
auto lo
iface lo inet loopback
iface eth0 inet manual
auto vmbr0
iface vmbr0 inet static
address 84.x.x.170
netmask 255.255.255.0
gateway 84.x.x.1
bridge_ports eth0
bridge_stp off
bridge_fd 0
auto vmbr174
iface vmbr174 inet static
address 84.x.x.174
netmask 255.255.255.0
bridge_ports none
bridge_stp off
bridge_fd 0