I have a thread over on their forums as well, I haven't got much help since the last time this happened.
Currently running OK on ProxMox 5.3 and FreeNas 11.1. I upgraded previously to 11.2, and it wouldn't boot. I tried to upgrade again today to 11.3, same errors.
Here are the screens I was able to capture with VNC.
Here is my config file for the VM.
Any idea on what would be causing the issue simply for the upgrade? I was able to revert back (fresh reinstall) on the local VM with 11.1, and import the volume. Luckily no data was at risk!
Currently running OK on ProxMox 5.3 and FreeNas 11.1. I upgraded previously to 11.2, and it wouldn't boot. I tried to upgrade again today to 11.3, same errors.
Here are the screens I was able to capture with VNC.
Here is my config file for the VM.
Code:
/etc/pve/qemu-server# cat 103.conf
boot: dcn
bootdisk: scsi0
cores: 10
ide2: none,media=cdrom
memory: 32768
name: FreeNAS
net0: virtio=F2:68:56:7B:9A:2C,bridge=vmbr0
numa: 0
ostype: l26
scsi0: local-lvm:vm-101-disk-0,size=16G
scsi1: /dev/disk/by-id/ata-WDC_WD80EMAZ-XXXX,iothread=1,size=7816839793K
scsi2: /dev/disk/by-id/ata-WDC_WD80EMAZ-XXXX,iothread=1,size=7816839793K
scsi3: /dev/disk/by-id/ata-WDC_WD80EMAZ-XXX,iothread=1,size=7816839793K
scsi4: /dev/disk/by-id/ata-WDC_WD80EMAZ-XXX,iothread=1,size=7816839793K
scsi5: /dev/disk/by-id/ata-WDC_WD80EMAZ-XXX,iothread=1,size=7816839793K
scsi6: /dev/disk/by-id/ata-WDC_WD80EMAZ-XXX,iothread=1,size=7816839793K
scsihw: virtio-scsi-pci
smbios1: uuid=69a8662f-4a4c-43fb-8d6d-43d3062d1931
sockets: 1
startup: order=100,up=120Any idea on what would be causing the issue simply for the upgrade? I was able to revert back (fresh reinstall) on the local VM with 11.1, and import the volume. Luckily no data was at risk!
