Hi
@Bishop27
thanks for posting in the forum!
So the EFI messages were just a warning for the soon expiring Secure Boot CAs from Microsoft, which you successfully updated as it seems.
The second error message as it says, has something to do with PCIe Passthrough, so a separate issue, there.
What kind of PCI(e) device are you trying to passthrough?
Please provide the output of the following commands:
Code:
dmesg | grep -e DMAR -e IOMMU
dmesg | grep 'remapping'
qm showcmd 105 --pretty
Also please determine the PCI identifier of the device you are passing through by using
lspci and then with the identifier run
lspci -vvvs <ID>
Yours sincerely
Jonas
Hello, below is the information you requested, As you can see the first 2 commands did not produce any output.
~# qm showcmd 105 --pretty
/usr/bin/kvm \
-id 105 \
-name Windows11Pro \
-no-shutdown \
-chardev 'socket,id=qmp,path=/var/run/qemu-server/105.qmp,server=on,wait=off' \
-mon 'chardev=qmp,mode=control' \
-chardev 'socket,id=qmp-event,path=/var/run/qmeventd.sock,reconnect-ms=5000' \
-mon 'chardev=qmp-event,mode=control' \
-pidfile /var/run/qemu-server/105.pid \
-daemonize \
-smbios 'type=1,uuid=553dce15-a918-4400-a519-bf578e21e588' \
-drive 'if=pflash,unit=0,format=raw,readonly=on,file=/usr/share/pve-edk2-firmware//OVMF_CODE_4M.secboot.fd' \
-drive 'if=pflash,unit=1,id=drive-efidisk0,format=qcow2,file=/mnt/VM-STORAGE/images/105/vm-105-disk-3.qcow2' \
-smp '4,sockets=1,cores=4,maxcpus=4' \
-nodefaults \
-boot 'menu=on,strict=on,reboot-timeout=1000,splash=/usr/share/qemu-server/bootsplash.jpg' \
-vga none \
-nographic \
-global 'kvm-pit.lost_tick_policy=discard' \
-cpu 'qemu64,+aes,-cet-ibt,-cet-ss,enforce,hv_ipi,hv_relaxed,hv_reset,hv_runtime,hv_spinlocks=0x1fff,hv_stimer,hv_synic,hv_time,hv_vapic,hv_vpindex,+kvm_pv_eoi,+kvm_pv_unhalt,+pni,+popcnt,+sse4.1,+sse4.2,+ssse3' \
-m 8192 \
-object 'memory-backend-ram,id=ram-node0,size=8192M' \
-numa 'node,nodeid=0,cpus=0-3,memdev=ram-node0' \
-object 'iothread,id=iothread-virtioscsi0' \
-readconfig /usr/share/qemu-server/pve-q35-4.0.cfg \
-device 'vmgenid,guid=24f918ab-388d-4cea-b1f2-280c83ad59f6' \
-device 'usb-tablet,id=tablet,bus=ehci.0,port=1' \
-device 'vfio-pci,host=0000:00:02.0,id=hostpci0,bus=ich9-pcie-port-1,addr=0x0' \
-chardev 'socket,id=tpmchar,path=/var/run/qemu-server/105.swtpm' \
-tpmdev 'emulator,id=tpmdev,chardev=tpmchar' \
-device 'tpm-tis,tpmdev=tpmdev' \
-chardev 'socket,path=/var/run/qemu-server/105.qga,server=on,wait=off,id=qga0' \
-device 'virtio-serial,id=qga0,bus=pci.0,addr=0x8' \
-device 'virtserialport,chardev=qga0,name=org.qemu.guest_agent.0' \
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:92fca1ee624b' \
-drive 'file=/mnt/ISOIMAGES/template/iso/virtio-win-0.1.240.iso,if=none,id=drive-ide0,media=cdrom,format=raw,aio=io_uring' \
-device 'ide-cd,bus=ide.0,unit=0,drive=drive-ide0,id=ide0,bootindex=101' \
-device 'virtio-scsi-pci,id=virtioscsi0,bus=pci.3,addr=0x1,iothread=iothread-virtioscsi0' \
-drive 'file=/mnt/VM-STORAGE/images/105/vm-105-disk-4.qcow2,if=none,id=drive-scsi0,cache=writeback,discard=on,format=qcow2,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=virtioscsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,rotation_rate=1,bootindex=100' \
-netdev 'type=tap,id=net0,ifname=tap105i0,script=/usr/libexec/qemu-server/pve-bridge,downscript=/usr/libexec/qemu-server/pve-bridgedown,vhost=on' \
-device 'virtio-net-pci,mac=BC:24:11:BF:42:13,netdev=net0,bus=pci.0,addr=0x12,id=net0,rx_queue_size=1024,tx_queue_size=256,bootindex=102' \
-rtc 'driftfix=slew,base=localtime' \
-machine 'hpet=off,type=pc-q35-8.1+pve0'
# lspci -vvvs 00:02:0
02:00.0 Ethernet controller: Intel Corporation Ethernet Controller I225-V (rev 03)
Subsystem: Intel Corporation Device 0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 50600000 (32-bit, non-prefetchable) [size=1M]
Region 3: Memory at 50700000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [70] MSI-X: Enable+ Count=5 Masked-
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00002000
Capabilities: [a0] Express (v2) Endpoint, IntMsgNum 0
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0W TEE-IO-
DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L1, Exit Latency L1 <4us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
AtomicOpsCtl: ReqEn-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF-
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [140 v1] Device Serial Number 58-47-ca-ff-ff-74-19-2b
Capabilities: [1c0 v1] Latency Tolerance Reporting
Max snoop latency: 3145728ns
Max no snoop latency: 3145728ns
Capabilities: [1f0 v1] Precision Time Measurement
PTMCap: Requester+ Responder- Root-
PTMClockGranularity: 4ns
PTMControl: Enabled+ RootSelected-
PTMEffectiveGranularity: 4ns
Capabilities: [1e0 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2- PCI-PM_L1.1+ ASPM_L1.2- ASPM_L1.1+ L1_PM_Substates+
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
L1SubCtl2:
Kernel driver in use: igc
Kernel modules: igc
