Unable to start init, probably incorrect template - CT not boot.

[mantex]

HI,

After a crash on my host server following hard reboot , one of my CT (102) do not normally restart and i have the following error :

Unable to start init probably incorrect template

I found a missing file ( /sbin/init) on CT102 . So I have even copied the same file from another ct (thats' works/live ), i have not error but the CT dont boot.

vzctl start 102
Starting container ...
Container is mounted
Adding IP address(es): REMOVE
Setting CPU units: 1000
Setting CPUs: 4
Container start in progress...

but no..

vzctl enter 102
Container is not running

On my Host.

uname -a
2.6.32-34-pve #1 SMP Sat Nov 8 09:38:26 CET 2014 x86_64 GNU/Linux

pveversion --verbose
proxmox-ve-2.6.32: 3.3-139 (running kernel: 2.6.32-34-pve)
pve-manager: 3.3-5 (running version: 3.3-5/bfebec03)
pve-kernel-2.6.32-32-pve: 2.6.32-136
pve-kernel-2.6.32-34-pve: 2.6.32-139
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.7-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.10-1
pve-cluster: 3.0-15
qemu-server: 3.3-3
pve-firmware: 1.1-3
libpve-common-perl: 3.0-19
libpve-access-control: 3.0-15
libpve-storage-perl: 3.0-25
pve-libspice-server1: 0.12.4-3
vncterm: 1.1-8
vzctl: 4.0-1pve6
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 2.1-10
ksm-control-daemon: 1.1-1
glusterfs-client: 3.5.2-1

file /var/lib/vz/private/102/sbin/init
/var/lib/vz/private/102/sbin/init: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.26, BuildID[sha1]=0xf4c005815c16bce9ce0fb5cfcf79d595ff3e8bdc, stripped

why ?

 

[tom]

HI,

After a crash on my host server following hard reboot , one of my CT (102) do not normally restart and i have the following error :

...

why ?

I assume because of your hard crash - maybe you lost hard disk data because your hard drive cache and/or raid volume does not have power-loss protection.?

what storage hardware/setup do you use?

if available, restore this CT from your last valid backup.