Unable to connect to web interface

[bartoo132]

Hello all!

I am quite new to Proxmox and virtualization and Linux in general so go easy on me

I created a basic home server basing on an old Dell PC

I installed Proxmox and configured static IP on the router and I was able to access the web interface as normal. I installed vms and couple of containers.

Unfortunately the PC has lost power and now when I try to connect to Proxmox using https://my.ip.address.here:8006/ I get this following error:

ERR_CONNECTION_REFUSED

- Nothing on the router has changed so I don't believe its being blocked there

- I can connect via SSH.

- I can ping 8.8.8.8 without packet loss.

Further more when I try to see what services are running using the "systemctl | grep pve"
I get an error: "Failed to list units: Transport endpoint is not connected"

I attach output form pveversion -v

Any help will be greatly appreciated

 

[Moayad]

Hi,

Can you see if the 8006 port is open on your Proxmox VE server? Since you can ssh to the server, can you please also provide us with the syslog? You can find the syslog in `/var/log/syslog`.

 

[bartoo132]

Hi

Thank you for your response!

I forgot to add. After the power went off. I changed a HDD in the PC. I have not touched the SSD that the Proxmox and the vms and ct were on.

The change and the power down was between 25/26 since then I cannot get on to the web interface.

I am not sure which way you want me to check if the port is open, but I tried this:

 

[Moayad]

Thank you for the files you're provided!

Can you please also post the output of the following command?

ls -lh /etc/pve

 

[bartoo132]

root@home:~# ls -lh /etc/pve
total 0

 

[Moayad]

Thank you for the output!

It seems in the pmxcfs. Can you please try to re-plug the disk you unplugged and see if works?

 

[bartoo132]

Hi thanks for the suggestion, I have forgotten about that. However still ERR_CONNECTION_REFUSED

 

[bbgeek17]

Are you by chance in Dublin time zone?
https://forum.proxmox.com/threads/systemd-100-cpu-hang.124767/

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

 

[bartoo132]

Bullseye pun intended.... I will read over this tomorrow

 

[bbgeek17]

Just change your timezone to UTC for now then.

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

 

[bartoo132]

Right lads case closed time updated proxmox back to life!