trying to open VM console - vncproxy connection timed out

[Felix Pastron]

I just updated all of our nodes in the cluster to proxmox 6.2-12. All VMs run fine and I can SSH into them from my local machine, but when I try to open Console within Proxmox web GUI, it times out and says "Failed to Connect" on the screen.

This is what I get when I run pveversion -v. Do I need to re-install proxmox-ve and others? Thank you for any input.

proxmox-ve: not correctly installed (running kernel: 5.4.65-1-pve)
pve-manager: not correctly installed (running version: 6.2-12/b287dd27)
pve-kernel-5.4: 6.2-7
pve-kernel-helper: 6.2-7
pve-kernel-5.4.65-1-pve: 5.4.65-1
pve-kernel-4.15: 5.4-19
pve-kernel-4.15.18-30-pve: 4.15.18-58
pve-kernel-4.15.18-27-pve: 4.15.18-55
pve-kernel-4.15.18-24-pve: 4.15.18-52
pve-kernel-4.15.18-21-pve: 4.15.18-48
pve-kernel-4.15.18-16-pve: 4.15.18-41
pve-kernel-4.15.18-15-pve: 4.15.18-40
pve-kernel-4.15.18-13-pve: 4.15.18-37
pve-kernel-4.15.18-12-pve: 4.15.18-36
pve-kernel-4.15.18-10-pve: 4.15.18-32
ceph-fuse: 12.2.11+dfsg1-2.1+b1
corosync: 3.0.4-pve1
criu: not correctly installed
glusterfs-client: not correctly installed
ifupdown: 0.8.35+pve1
ksm-control-daemon: 1.3-1
libjs-extjs: 6.0.1-10
libknet1: 1.16-pve1
libproxmox-acme-perl: not correctly installed
libpve-access-control: not correctly installed
libpve-apiclient-perl: not correctly installed
libpve-common-perl: not correctly installed
libpve-guest-common-perl: not correctly installed
libpve-http-server-perl: not correctly installed
libpve-storage-perl: not correctly installed
libqb0: 1.0.5-1
libspice-server1: 0.14.2-4~pve6+1
lvm2: not correctly installed
lxc-pve: not correctly installed
lxcfs: 4.0.3-pve3
novnc-pve: 1.1.0-1
proxmox-backup-client: 0.9.0-2
proxmox-mini-journalreader: 1.1-1
proxmox-widget-toolkit: 2.3-1
pve-cluster: not correctly installed
pve-container: not correctly installed
pve-docs: 6.2-6
pve-edk2-firmware: 2.20200531-1
pve-firewall: not correctly installed
pve-firmware: 3.1-3
pve-ha-manager: not correctly installed
pve-i18n: 2.2-1
pve-qemu-kvm: not correctly installed
pve-xtermjs: 4.7.0-2
qemu-server: not correctly installed
smartmontools: 7.1-pve2
spiceterm: not correctly installed
vncterm: 1.6-2
zfsutils-linux: 0.8.4-pve2

 

[Felix Pastron]

I just ran apt "install proxmox-ve" and it told me "E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem."

I ran the "dpkg --configure -a" command and it installed/configured everything. Now everything looks correct, but do I need to re-start any services for the web GUI's Console to work? I cleared all cache and restarted Firefox.

proxmox-ve: 6.2-2 (running kernel: 5.4.65-1-pve)
pve-manager: 6.2-12 (running version: 6.2-12/b287dd27)
pve-kernel-5.4: 6.2-7
pve-kernel-helper: 6.2-7
pve-kernel-5.4.65-1-pve: 5.4.65-1
pve-kernel-4.15: 5.4-19
pve-kernel-4.15.18-30-pve: 4.15.18-58
pve-kernel-4.15.18-27-pve: 4.15.18-55
pve-kernel-4.15.18-24-pve: 4.15.18-52
pve-kernel-4.15.18-21-pve: 4.15.18-48
pve-kernel-4.15.18-16-pve: 4.15.18-41
pve-kernel-4.15.18-15-pve: 4.15.18-40
pve-kernel-4.15.18-13-pve: 4.15.18-37
pve-kernel-4.15.18-12-pve: 4.15.18-36
pve-kernel-4.15.18-10-pve: 4.15.18-32
ceph-fuse: 12.2.11+dfsg1-2.1+b1
corosync: 3.0.4-pve1
criu: 3.11-3
glusterfs-client: 5.5-3
ifupdown: 0.8.35+pve1
ksm-control-daemon: 1.3-1
libjs-extjs: 6.0.1-10
libknet1: 1.16-pve1
libproxmox-acme-perl: 1.0.5
libpve-access-control: 6.1-3
libpve-apiclient-perl: 3.0-3
libpve-common-perl: 6.2-2
libpve-guest-common-perl: 3.1-3
libpve-http-server-perl: 3.0-6
libpve-storage-perl: 6.2-8
libqb0: 1.0.5-1
libspice-server1: 0.14.2-4~pve6+1
lvm2: 2.03.02-pve4
lxc-pve: 4.0.3-1
lxcfs: 4.0.3-pve3
novnc-pve: 1.1.0-1
proxmox-backup-client: 0.9.0-2
proxmox-mini-journalreader: 1.1-1
proxmox-widget-toolkit: 2.3-1
pve-cluster: 6.2-1
pve-container: 3.2-2
pve-docs: 6.2-6
pve-edk2-firmware: 2.20200531-1
pve-firewall: 4.1-3
pve-firmware: 3.1-3
pve-ha-manager: 3.1-1
pve-i18n: 2.2-1
pve-qemu-kvm: 5.1.0-3
pve-xtermjs: 4.7.0-2
qemu-server: 6.2-15
smartmontools: 7.1-pve2
spiceterm: 3.1-1
vncterm: 1.6-2
zfsutils-linux: 0.8.4-pve2

 

[Felix Pastron]

I can actually open a Console to any Windows VM, but not Linux. Do I need to manually allow the connection?