Hello,
i have a strange situation, i managed to setup thunderbolt connection on proxmox ve and my mac.
I am getting good results if i run iperf3 to the proxmox machine (ms-01)
But when i test the connection the the VM the send packages are almost 0
I can't figure it out what am i doing wrong
maybe i am missing something ...
i have a strange situation, i managed to setup thunderbolt connection on proxmox ve and my mac.
I am getting good results if i run iperf3 to the proxmox machine (ms-01)
Code:
iperf3 -c 17.1.1.1 --bidir
Connecting to host 17.1.1.1, port 5201
[ 5] local 17.1.1.100 port 54764 connected to 17.1.1.1 port 5201
[ 7] local 17.1.1.100 port 54765 connected to 17.1.1.1 port 5201
[ ID][Role] Interval Transfer Bitrate
[ 5][TX-C] 0.00-1.00 sec 1.33 GBytes 11.3 Gbits/sec
[ 7][RX-C] 0.00-1.01 sec 1.40 GBytes 12.0 Gbits/sec
[ 5][TX-C] 1.00-2.00 sec 1.35 GBytes 11.6 Gbits/sec
[ 7][RX-C] 1.01-2.01 sec 1.87 GBytes 16.1 Gbits/sec
[ 5][TX-C] 2.00-3.01 sec 1.41 GBytes 12.1 Gbits/sec
[ 7][RX-C] 2.01-3.01 sec 2.00 GBytes 17.2 Gbits/sec
[ 5][TX-C] 3.01-4.00 sec 1.31 GBytes 11.3 Gbits/sec
[ 7][RX-C] 3.01-4.00 sec 1.76 GBytes 15.1 Gbits/sec
[ 5][TX-C] 4.00-5.01 sec 1.32 GBytes 11.3 Gbits/sec
[ 7][RX-C] 4.00-5.01 sec 1.52 GBytes 13.1 Gbits/sec
[ 5][TX-C] 5.01-6.00 sec 1.40 GBytes 12.1 Gbits/sec
[ 7][RX-C] 5.01-6.00 sec 1.96 GBytes 16.9 Gbits/sec
[ 5][TX-C] 6.00-7.00 sec 1.44 GBytes 12.4 Gbits/sec
[ 7][RX-C] 6.00-7.00 sec 1.97 GBytes 16.9 Gbits/sec
[ 5][TX-C] 7.00-8.00 sec 1.39 GBytes 11.9 Gbits/sec
[ 7][RX-C] 7.00-8.00 sec 1.90 GBytes 16.3 Gbits/sec
[ 5][TX-C] 8.00-9.00 sec 1.48 GBytes 12.7 Gbits/sec
[ 7][RX-C] 8.00-9.01 sec 2.07 GBytes 17.8 Gbits/sec
[ 5][TX-C] 9.00-10.01 sec 1.49 GBytes 12.8 Gbits/sec
[ 7][RX-C] 9.01-10.01 sec 2.07 GBytes 17.8 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID][Role] Interval Transfer Bitrate Retr
[ 5][TX-C] 0.00-10.01 sec 13.9 GBytes 12.0 Gbits/sec sender
[ 5][TX-C] 0.00-10.01 sec 13.9 GBytes 12.0 Gbits/sec receiver
[ 7][RX-C] 0.00-10.01 sec 18.5 GBytes 15.9 Gbits/sec 4692 sender
[ 7][RX-C] 0.00-10.01 sec 18.5 GBytes 15.9 Gbits/sec receiver
iperf Done.But when i test the connection the the VM the send packages are almost 0
Code:
iperf3 -c 17.1.1.3 --bidir
Connecting to host 17.1.1.3, port 5201
[ 5] local 17.1.1.100 port 54893 connected to 17.1.1.3 port 5201
[ 7] local 17.1.1.100 port 54894 connected to 17.1.1.3 port 5201
[ ID][Role] Interval Transfer Bitrate
[ 5][TX-C] 0.00-1.01 sec 128 KBytes 1.04 Mbits/sec
[ 7][RX-C] 0.00-1.01 sec 2.16 GBytes 18.5 Gbits/sec
[ 5][TX-C] 1.01-2.01 sec 0.00 Bytes 0.00 bits/sec
[ 7][RX-C] 1.01-2.01 sec 2.20 GBytes 18.9 Gbits/sec
[ 5][TX-C] 2.01-3.01 sec 0.00 Bytes 0.00 bits/sec
[ 7][RX-C] 2.01-3.01 sec 2.20 GBytes 18.9 Gbits/sec
[ 5][TX-C] 3.01-4.00 sec 0.00 Bytes 0.00 bits/sec
[ 7][RX-C] 3.01-4.00 sec 2.20 GBytes 18.9 Gbits/sec
[ 5][TX-C] 4.00-5.00 sec 0.00 Bytes 0.00 bits/sec
[ 7][RX-C] 4.00-5.00 sec 2.19 GBytes 18.9 Gbits/sec
[ 5][TX-C] 5.00-6.00 sec 0.00 Bytes 0.00 bits/sec
[ 7][RX-C] 5.00-6.00 sec 2.20 GBytes 18.8 Gbits/sec
[ 5][TX-C] 6.00-7.00 sec 0.00 Bytes 0.00 bits/sec
[ 7][RX-C] 6.00-7.01 sec 2.20 GBytes 18.9 Gbits/sec
[ 5][TX-C] 7.00-8.01 sec 0.00 Bytes 0.00 bits/sec
[ 7][RX-C] 7.01-8.01 sec 2.20 GBytes 18.9 Gbits/sec
[ 5][TX-C] 8.01-9.00 sec 128 KBytes 1.05 Mbits/sec
[ 7][RX-C] 8.01-9.00 sec 2.19 GBytes 18.8 Gbits/sec
[ 5][TX-C] 9.00-10.01 sec 0.00 Bytes 0.00 bits/sec
[ 7][RX-C] 9.00-10.01 sec 2.19 GBytes 18.8 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID][Role] Interval Transfer Bitrate Retr
[ 5][TX-C] 0.00-10.01 sec 256 KBytes 210 Kbits/sec sender
[ 5][TX-C] 0.00-10.01 sec 128 KBytes 105 Kbits/sec receiver
[ 7][RX-C] 0.00-10.01 sec 21.9 GBytes 18.8 Gbits/sec 1305 sender
[ 7][RX-C] 0.00-10.01 sec 21.9 GBytes 18.8 Gbits/sec receiver
iperf Done.I can't figure it out what am i doing wrong
maybe i am missing something ...