Thin repair must be manually repaired!

bogusT

New Member
Mar 1, 2023
1
0
1
Recently I had spun up a new vm that I was using as "tempstorage". Basically I set the size to 16tb which was the overall servers max space. I had 3 other vms up and running before this. Those vms all had 500GB and one 5TB. Neither of those were even close to that limit. Same with the "tempstorage" server. I got bout 1.8TB of data added before I woke up and the server was half running. The last drive was orange which means there is an issue with the drive. However shortly after rebooting the server my HPE server corrected the drive and it turned green. So I guess it was a result of running out of space.

Now I cannot get the lvm2 to start. The only message I get is "Manual repair required!" message. I have tried the:

Code:
lvconvert --repair pve/data

I still yield the same results with the message "Manual repair required!".

fdisk -l
Code:
Disk /dev/sda: 1.36 TiB, 1499832039424 bytes, 2929359452 sectors
Disk model: LOGICAL VOLUME 
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 262144 bytes / 1310720 bytes
Disklabel type: gpt
Disk identifier: A3A2F44C-5D01-4566-9F1D-A0474AA28060

Device       Start        End    Sectors   Size Type
/dev/sda1     2560       5119       2560   1.3M BIOS boot
/dev/sda2     5120    1054719    1049600 512.5M EFI System
/dev/sda3  1054720 2929357454 2928302735   1.4T Linux filesystem


Disk /dev/sdb: 16.37 TiB, 18003355459584 bytes, 35162803632 sectors
Disk model: LOGICAL VOLUME 
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 262144 bytes / 1572864 bytes
Disklabel type: gpt
Disk identifier: 6B0CC303-8D66-4D65-90DE-196D9B7C90AA

Device       Start         End     Sectors  Size Type
/dev/sdb1       34        2047        2014 1007K BIOS boot
/dev/sdb2     2048     1050623     1048576  512M EFI System
/dev/sdb3  1050624 35162803598 35161752975 16.4T Linux LVM

Disk /dev/loop0: 673.75 MiB, 706473984 bytes, 1379832 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

pvs -a
Code:
  PV         VG  Fmt  Attr PSize  PFree
  /dev/sda2           ---      0       0
  /dev/sda3           ---      0       0
  /dev/sdb2           ---      0       0
  /dev/sdb3  pve lvm2 a--  16.37t <16.38g

vgs -a
Code:
VG  #PV #LV #SN Attr   VSize  VFree
pve   1   9   0 wz--n- 16.37t <16.38g

lvs -a
Code:
  LV              VG  Attr       LSize   Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  data            pve twi---tz-- <16.23t                                                 
  [data_tdata]    pve Twi------- <16.23t                                                 
  [data_tmeta]    pve ewi-------  15.81g                                                 
  [lvol0_pmspare] pve ewi-------  15.81g                                                 
  root            pve -wi-a-----  96.00g                                                 
  swap            pve -wi-a-----   8.00g                                                 
  vm-100-disk-0   pve Vwi---tz-- 500.00g data                                             
  vm-101-disk-0   pve Vwi---tz--   5.00t data                                             
  vm-102-disk-0   pve Vwi---tz-- 500.00g data                                             
  vm-103-disk-0   pve Vwi---tz--   5.00t data                                             
  vm-104-disk-0   pve Vwi---tz-- 100.00g data                                             
  vm-105-disk-0   pve Vwi---tz--  16.00t data

pvscan
Code:
  PV /dev/sdb3   VG pve             lvm2 [16.37 TiB / <16.38 GiB free]
  Total: 1 [16.37 TiB] / in use: 1 [16.37 TiB] / in no VG: 0 [0   ]

lvscan
Code:
  inactive          '/dev/pve/data' [<16.23 TiB] inherit
  ACTIVE            '/dev/pve/swap' [8.00 GiB] inherit
  ACTIVE            '/dev/pve/root' [96.00 GiB] inherit
  inactive          '/dev/pve/vm-100-disk-0' [500.00 GiB] inherit
  inactive          '/dev/pve/vm-101-disk-0' [5.00 TiB] inherit
  inactive          '/dev/pve/vm-102-disk-0' [500.00 GiB] inherit
  inactive          '/dev/pve/vm-103-disk-0' [5.00 TiB] inherit
  inactive          '/dev/pve/vm-104-disk-0' [100.00 GiB] inherit
  inactive          '/dev/pve/vm-105-disk-0' [16.00 TiB] inherit

vgdisplay
Code:
  --- Volume group ---
  VG Name               pve
  System ID           
  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  31
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                9
  Open LV               0
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               16.37 TiB
  PE Size               4.00 MiB
  Total PE              4292205
  Alloc PE / Size       4288013 / <16.36 TiB
  Free  PE / Size       4192 / <16.38 GiB
  VG UUID               FwXD4j-Y1q4-DyV0-i34b-qGSw-zwAO-2aHh2f
 
Last edited:

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!