the web interface does not work after connecting the 2-nd video card

[Fullmoon]

Good day.
When I connect a second video card, I sometimes lose access to the web interface.
I noticed that when I insert a video card and turn on the host, it loads the second time (maybe something happens in the BIOS) and access disappears, and if it loads the third time (2 attempts to turn on unsuccessfully), the access appears in the web interface.
A failed boot attempt - is when monitor screen does not turn on and coolers are noisy

 

[matrix]

what say journalctl or dmesg ?

 

[Fullmoon]

what say journalctl or dmesg ?

I apologize for my incompetence. I don’t know how to save the log file. With this configuration, I can’t get to the web interface (added a video card)

 

[Fullmoon]

 

[Fullmoon]

its normal start without video card

 

[Fullmoon]

I greet you. A work colleague helped me solve the problem. It turns out that PROXMOX works on a virtual network adapter, and the physical one is a bridge (if I understood everything correctly) and the Physical adapter was renamed when changing the configuration of video cards


Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@VIRTUAL:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vmbr0 state UP group default qlen 1000
link/ether 90:2b:34:37:8f:8a brd ff:ff:ff:ff:ff:ff
3: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 90:2b:34:37:8f:8a brd ff:ff:ff:ff:ff:ff
inet 192.168.10.10/24 brd 192.168.10.255 scope global vmbr0
valid_lft forever preferred_lft forever
inet6 fe80::922b:34ff:fe37:8f8a/64 scope link
valid_lft forever preferred_lft forever
4: tap100i0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master fwbr100i0 state UNKNOWN group default qlen 1000
link/ether 1e:ef:b1:a2:6c:22 brd ff:ff:ff:ff:ff:ff
5: fwbr100i0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether e6:82:31:99:34:57 brd ff:ff:ff:ff:ff:ff
6: fwpr100p0@fwln100i0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master vmbr0 state UP group default qlen 1000
link/ether 62:20:01:f1:b7:12 brd ff:ff:ff:ff:ff:ff
7: fwln100i0@fwpr100p0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master fwbr100i0 state UP group default qlen 1000
link/ether e6:82:31:99:34:57 brd ff:ff:ff:ff:ff:ff
========================

go to:
root@VIRTUAL:~# nano /etc/network/interfaces



auto lo
iface lo inet loopback

iface enp5s0 inet manual

auto vmbr0
iface vmbr0 inet static
address 192.168.10.10
netmask 255.255.255.0
gateway 192.168.10.1
bridge_ports enp6s0
bridge_stp off
bridge_fd 0