temperature monitoring

[tincboy]

I want to start monitor temperature of all my Proxmox servers via lm-sensros packet,
http://superuser.com/questions/25176/how-can-i-monitor-the-cpu-temperature-under-linux
Before starting it I want to make sure there's no conflict with kernel which Proxmox is using and this packet,
Any experience?

 

[udo]

I want to start monitor temperature of all my Proxmox servers via lm-sensros packet,
http://superuser.com/questions/25176/how-can-i-monitor-the-cpu-temperature-under-linux
Before starting it I want to make sure there's no conflict with kernel which Proxmox is using and this packet,
Any experience?

Hi,
I have lm-sensors running without trouble on a pve1.9 cluster.

Udo

 

[tincboy]

Hi,
I have lm-sensors running without trouble on a pve1.9 cluster.

Udo

I got the error below while running `sensors` command after `detect-sensors` on kernel 2.6.32-14-pve

No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.

Any suggestion?

 

[ayo91]

I got the error below while running `sensors` command after `detect-sensors` on kernel 2.6.32-14-pve

No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.

Any suggestion?

same issue here

 

[LnxBil]

This is not a PVE issue, but to solve it anyways: run sensors-detect and do that it tells you. Better to just use the management interface for retrieving sensor data either direct via the management interface of your server (ilo, idrac, irmc, ..) or the ipmitool sensor interface.