[SOLVED] System don't boot after upgrade to 4.4.67-92 (and pve-manager 4.4-15)

[udo]

Hi,
perhaps it's has nothing to do with the upgrade, but I do an fresh install yesterday (pve-enterprise) of an system (now with zfs-root). Configured ceph and do an reboot - all fine. (after that I installed ntp - nut I think that's not the issue).

Today I installed the fresh packages (kernel + pve-manager) and reboot, but the system (dell r620) don't came up!

The console shows "[ 6.186140] Btrfs loaded" and after return the seconds with "random: nonblocking pool is initialized" appear.

The strange thing, it's happens with the old 4.4.35 kernel also.

The non-standard thing on this machine ist due lsi-crapware that both zfs-raid SSDs are an raid0 (lun0 + lun3 due change from an lvm-install with additional raids).

Any hints?

Udo

 

[udo]

Hi,
if I add an "single" on the grub-line, I got following (slightly shorted):

Scanning for Btrfs filesystems
done.
modprobe: module unknown not found in modules.dep
Begin: Will now check root file system ... fsck from util-linux 2.25.2
done.
mount: mounting ZFS=rpool/ROOT/pve-1 on /root failed: No such file or directory
done.
Target filesystem dowsn't have requested /sbin/init.
...
modprobe: module ehci-orion not found in modules.dep

Busybox v1.22.1 ...

lsmod inside busybox don't show zfs...

Udo

 

[udo]

Hmm,
my fault! the puupet-run before changed the grub-config back to non-zfs!

Sorry for the noise!

Udo