Looks like the link is dead again. Any chance you still have the files? I'd be happy to put them somewhere permanent.Here are the files: Intel X722 Gbit NIC Firmware 4.11 + 5.50
Looks like the link is dead again. Any chance you still have the files? I'd be happy to put them somewhere permanent.Here are the files: Intel X722 Gbit NIC Firmware 4.11 + 5.50
Hello, here is a permanent upload now: Intel X722 Gbit NIC Firmware 4.11 + 5.50Looks like the link is dead again. Any chance you still have the files? I'd be happy to put them somewhere permanent.
./FWUpdate.sh
Intel(R) Ethernet NVM Update Tool
NVMUpdate version 1.37.28.0
Copyright(C) 2013 - 2021 Intel Corporation.
Config file read.
Inventory
[00:028:00:00]: Intel(R) Ethernet Connection X722 for 10GBASE-T
Flash inventory started.
Shadow RAM inventory started.
Alternate MAC address is not set.
Shadow RAM inventory finished.
Flash inventory finished.
OROM inventory started.
OROM inventory finished.
PHY NVM inventory started.
PHY NVM inventory finished.
[00:028:00:01]: Intel(R) Ethernet Connection X722 for 10GBASE-T
Device already inventoried.
Update
[00:028:00:00]: Intel(R) Ethernet Connection X722 for 10GBASE-T
Flash update started.
|======================[100%]======================|
NVM verification started.
Shadow RAM verification started.
|>.....................[ 0%]......................|
Difference found at offset 0x4E [Device=0x6767, Buffer=0x6800] - update required.
NVM update is required.
Shadow RAM verification finished.
Error: Flash update failed.
OROM: One of the module updates failed - skipping update.
PHY NVM: One of the module updates failed - skipping update.
Update security revisions
[00:028:00:00]: Intel(R) Ethernet Connection X722 for 10GBASE-T
Skipping update minimum security revisions.
Update VPD with VPD template
[00:028:00:00]: Intel(R) Ethernet Connection X722 for 10GBASE-T
Skipping VPD update with VPD template.
ethtool -i eno1np0
driver: i40e
version: 6.10.14-zabbly+
firmware-version: 5.50 0x800032e8 1.2527.0
expansion-rom-version:
bus-info: 0000:1c:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
Please check for new BIOS and BMC firmware; maybe you need to flash them first.upgrade to 4.11 via uefi went well, but 5.50 fails for me with:
Code:./FWUpdate.sh Intel(R) Ethernet NVM Update Tool NVMUpdate version 1.37.28.0 Copyright(C) 2013 - 2021 Intel Corporation. Config file read. Inventory [00:028:00:00]: Intel(R) Ethernet Connection X722 for 10GBASE-T Flash inventory started. Shadow RAM inventory started. Alternate MAC address is not set. Shadow RAM inventory finished. Flash inventory finished. OROM inventory started. OROM inventory finished. PHY NVM inventory started. PHY NVM inventory finished. [00:028:00:01]: Intel(R) Ethernet Connection X722 for 10GBASE-T Device already inventoried. Update [00:028:00:00]: Intel(R) Ethernet Connection X722 for 10GBASE-T Flash update started. |======================[100%]======================| NVM verification started. Shadow RAM verification started. |>.....................[ 0%]......................| Difference found at offset 0x4E [Device=0x6767, Buffer=0x6800] - update required. NVM update is required. Shadow RAM verification finished. Error: Flash update failed. OROM: One of the module updates failed - skipping update. PHY NVM: One of the module updates failed - skipping update. Update security revisions [00:028:00:00]: Intel(R) Ethernet Connection X722 for 10GBASE-T Skipping update minimum security revisions. Update VPD with VPD template [00:028:00:00]: Intel(R) Ethernet Connection X722 for 10GBASE-T Skipping VPD update with VPD template.
even though ethotool shows 5.50 (with different end version 1.2527.0 not 1.3082.0):
Code:ethtool -i eno1np0 driver: i40e version: 6.10.14-zabbly+ firmware-version: 5.50 0x800032e8 1.2527.0 expansion-rom-version: bus-info: 0000:1c:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: yes
The download link is above, you can find it again here: Intel X722 Gbit NIC Firmware 4.11 + 5.50Hello, here is a permanent upload now: Intel X722 Gbit NIC Firmware 4.11 + 5.50
Same issue here, any luck getting the second update to work?Please check for new BIOS and BMC firmware; maybe you need to flash them first.
Here was my ultimate fix, if anyone runs into this: In the Linux terminal after the first failed update: sudo ./nvmupdate64e -u -c nvmupdate.cfg -sv. Reboot, and good to go, all matches properly now.Same issue here, any luck getting the second update to work?
We use essential cookies to make this site work, and optional cookies to enhance your experience.