Hello together,
I have the following problem:
I want to setup my running PVE (with all the lxcs and vms) to use openvswitch-switch.
The package is already installed.
So my Network Interfaces configuration is:
enp0s31f6: setup as vmbr0 -> actually with the ip 10.0.0.47/24
enp1s0f0: setup as vmbr1 -> used for LAN in OPNSense
enp1s0f1: setup as vmbr2 -> used as WAN in OPNsense
So my plan is, to get everything up in running in a separate Network and getting everything through the OPNSense Firewall.
It's more Network and Proxmox related I think, other VLANs I configured are running on other switches.
What I checked out:
on my switch side:
setting my Netgear GS308E via 802.1Q to have a VLAN named "101".
port 1 -> Tagged --> from my Gateway
port 2 -> internal Network 10.0.0.0/24
port 3 -> Untagged for PVE
port 5+6 -> Untagged for LAN and WAN in OPNSense
PVIDs for ports 3+5+6 101
on PVE:
I tested the following interfaces configuration after reading the Documentation for it:
auto lo
iface lo inet loopback
auto enp0s31f6
iface enp0s31f6 inet manual
ovs_type OVSPort
ovs_bridge vmbr0
auto enp1s0f1
iface enp1s0f1 inet manual
ovs_type OVSPort
ovs_bridge vmbr1
auto enp1s0f0
iface enp1s0f0 inet manual
ovs_type OVSPort
ovs_bridge vmbr2
auto vlan101
iface vlan101 inet static
address 10.0.0.47/24
gateway 10.0.0.1
ovs_type OVSIntPort
ovs_bridge vmbr0
ovs_options tag=101
auto vmbr0
iface vmbr0 inet manual
ovs_type OVSBridge
ovs_ports enp0s31f6 vlan101
auto vmbr1
iface vmbr1 inet manual
ovs_type OVSBridge
ovs_ports enp1s0f1
auto vmbr2
iface vmbr2 inet manual
ovs_type OVSBridge
ovs_ports enp1s0f0
source /etc/network/interfaces.d/*
But after that pve isn't responsible.
I can't really find out why.
It's the first time I tested something like this.
I would be very appreciated if you guy can help me to get it working and also getting a deeper understanding how it works.
Best regards 0zw00d
I have the following problem:
I want to setup my running PVE (with all the lxcs and vms) to use openvswitch-switch.
The package is already installed.
So my Network Interfaces configuration is:
enp0s31f6: setup as vmbr0 -> actually with the ip 10.0.0.47/24
enp1s0f0: setup as vmbr1 -> used for LAN in OPNSense
enp1s0f1: setup as vmbr2 -> used as WAN in OPNsense
So my plan is, to get everything up in running in a separate Network and getting everything through the OPNSense Firewall.
It's more Network and Proxmox related I think, other VLANs I configured are running on other switches.
What I checked out:
on my switch side:
setting my Netgear GS308E via 802.1Q to have a VLAN named "101".
port 1 -> Tagged --> from my Gateway
port 2 -> internal Network 10.0.0.0/24
port 3 -> Untagged for PVE
port 5+6 -> Untagged for LAN and WAN in OPNSense
PVIDs for ports 3+5+6 101
on PVE:
I tested the following interfaces configuration after reading the Documentation for it:
auto lo
iface lo inet loopback
auto enp0s31f6
iface enp0s31f6 inet manual
ovs_type OVSPort
ovs_bridge vmbr0
auto enp1s0f1
iface enp1s0f1 inet manual
ovs_type OVSPort
ovs_bridge vmbr1
auto enp1s0f0
iface enp1s0f0 inet manual
ovs_type OVSPort
ovs_bridge vmbr2
auto vlan101
iface vlan101 inet static
address 10.0.0.47/24
gateway 10.0.0.1
ovs_type OVSIntPort
ovs_bridge vmbr0
ovs_options tag=101
auto vmbr0
iface vmbr0 inet manual
ovs_type OVSBridge
ovs_ports enp0s31f6 vlan101
auto vmbr1
iface vmbr1 inet manual
ovs_type OVSBridge
ovs_ports enp1s0f1
auto vmbr2
iface vmbr2 inet manual
ovs_type OVSBridge
ovs_ports enp1s0f0
source /etc/network/interfaces.d/*
But after that pve isn't responsible.
I can't really find out why.
It's the first time I tested something like this.
I would be very appreciated if you guy can help me to get it working and also getting a deeper understanding how it works.
Best regards 0zw00d