start VM's before lvm and iscsi attached

[kvone]

I met a problem:
During run proxmox host system, VMs start before disk array (iscsi=> lvm) attached to host-system.
Mar 2 18:57:31 vds-2 task UPID:vds-2:00000C1C:00000845:531346D8:startall::root@pam:: starting task UPID:vds-2:00000C26:00000977:531346DB:qmstart:101:root@pam:
Mar 2 18:57:31 vds-2 task UPID:vds-2:00000C1C:00000845:531346D8:startall::root@pam:: start VM 101: UPID:vds-2:00000C26:00000977:531346DB:qmstart:101:root@pam:
Mar 2 18:57:33 vds-2 task UPID:vds-2:00000C1C:00000845:531346D8:startall::root@pam:: storage 'nas2-n2' is not online
Mar 2 18:57:42 vds-2 pvestatd[3071]: WARNING: storage 'nas2-n2' is not online

But after several time from web-interface i can run VM successful..
How i can edit ordering attached iscsi and lvm storages and run VM's?

proxmox-ve-2.6.32: 3.1-121 (running kernel: 2.6.32-27-pve) pve-manager: 3.1-43 (running version: 3.1-43/1d4b0dfb) pve-kernel-2.6.32-27-pve: 2.6.32-121 pve-kernel-2.6.32-26-pve: 2.6.32-114 lvm2: 2.02.98-pve4 clvm: 2.02.98-pve4 corosync-pve: 1.4.5-1 openais-pve: 1.1.4-3 libqb0: 0.11.1-2 redhat-cluster-pve: 3.2.0-2 resource-agents-pve: 3.9.2-4 fence-agents-pve: 4.0.5-1 pve-cluster: 3.0-12 qemu-server: 3.1-15 pve-firmware: 1.1-2 libpve-common-perl: 3.0-13 libpve-access-control: 3.0-11 libpve-storage-perl: 3.0-19 pve-libspice-server1: 0.12.4-3 vncterm: 1.1-6 vzctl: 4.0-1pve4 vzprocps: 2.0.11-2 vzquota: 3.1-2 pve-qemu-kvm: 1.7-4 ksm-control-daemon: 1.1-1 glusterfs-client: 3.4.2-1

 

[thheo]

Try to setup insserv overrides through /etc/insserv/

 

[kvone]

proxmox mount iscsi target via internal method, not host system. but, the time of launch VM is not yet done, and I get the error:
Tue Mar 4 03:55:02 2014: Starting VM 100 failed: status
Tue Mar 4 03:55:02 2014: Starting VM 101 Tue Mar 4 03:55:05 2014: Starting VM 101 failed: status

 

[kvone]

up, how can I fix it?

 

[m.ardito]

perhaps can you bypass using per-vm startup delay?

see vm -> options -> start/shutdown order
double clik the item, the config panel allows you to set delays, too, although it seems only related to "the order"

Marco