SSD Wearout shows N/A

P

Propaganda

New Member
Nov 13, 2022
10
0
1
I have an HP branded Intel s3710 which shows "N/A" for the wearout indicator. Smartctl says it has 3% wear; "3 --- Percentage Used Endurance Indicator".

root@xxxxxxxx:~# smartctl -q noserial -x /dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.102-1-pve] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: MK0200GEYKC Firmware Version: 4IHVHPG6 User Capacity: 200,049,647,616 bytes [200 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Apr 25 14:56:38 2023 HDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Unavailable Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 13) minutes. Conveyance self-test routine recommended polling time: ( 13) minutes. SCT capabilities: (0x0039) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16441 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 803900 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 9 Power_On_Hours -O--CK 100 100 000 - 36379 173 Unknown_Attribute PO--CK 097 097 001 - 0 175 Program_Fail_Count_Chip PO--CK 100 100 010 - 704377198108 180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 130 130 039 - 886909 194 Temperature_Celsius -O---K 100 100 000 - 24 196 Reallocated_Event_Count PO--CK 100 100 010 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 8 Comprehensive SMART error log 0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 2 Extended self-test log 0x08 GPL,SL R/O 2 Power Conditions log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xb0 GPL,SL VS 1 Device vendor specific log 0xb1 GPL,SL VS 33 Device vendor specific log 0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL,SL VS 127 Device vendor specific log 0xb8 GPL,SL VS 1 Device vendor specific log 0xb9 GPL VS 1544 Device vendor specific log 0xb9 SL VS 8 Device vendor specific log 0xba GPL VS 1280 Device vendor specific log 0xd0 GPL,SL VS 1 Device vendor specific log 0xd7 GPL,SL VS 1 Device vendor specific log 0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (20 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 36112 - # 2 Short offline Completed without error 00% 36095 - # 3 Short offline Completed without error 00% 36095 - # 4 Conveyance offline Completed without error 00% 36070 - # 5 Short offline Completed without error 00% 36070 - # 6 Extended offline Completed without error 00% 36056 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 8230651036453310209 7205815500360646658 Not_testing 2 100 39619133658116617 Not_testing 3 6989643439801368576 97 Not_testing 4 10240040292698829743 9367552869210825731 Not_testing 5 110531106178 32317011665602 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 24 Celsius Power Cycle Min/Max Temperature: 24/24 Celsius Lifetime Min/Max Temperature: 20/33 Celsius Specified Max Operating Temperature: 60 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 00 00 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 0/60 Celsius Temperature History Size (Index): 478 (167) Index Estimated Time Temperature Celsius 168 2023-04-25 06:59 25 ****** ... ..( 74 skipped). .. ****** 243 2023-04-25 08:14 25 ****** 244 2023-04-25 08:15 24 ***** ... ..( 29 skipped). .. ***** 274 2023-04-25 08:45 24 ***** 275 2023-04-25 08:46 25 ****** 276 2023-04-25 08:47 25 ****** 277 2023-04-25 08:48 24 ***** ... ..(136 skipped). .. ***** 414 2023-04-25 11:05 24 ***** 415 2023-04-25 11:06 ? - 416 2023-04-25 11:07 23 **** ... ..( 2 skipped). .. **** 419 2023-04-25 11:10 23 **** 420 2023-04-25 11:11 24 ***** ... ..( 2 skipped). .. ***** 423 2023-04-25 11:14 24 ***** 424 2023-04-25 11:15 25 ****** ... ..( 2 skipped). .. ****** 427 2023-04-25 11:18 25 ****** 428 2023-04-25 11:19 24 ***** ... ..( 7 skipped). .. ***** 436 2023-04-25 11:27 24 ***** 437 2023-04-25 11:28 25 ****** 438 2023-04-25 11:29 25 ****** 439 2023-04-25 11:30 25 ****** 440 2023-04-25 11:31 24 ***** ... ..( 31 skipped). .. ***** 472 2023-04-25 12:03 24 ***** 473 2023-04-25 12:04 ? - 474 2023-04-25 12:05 24 ***** ... ..( 13 skipped). .. ***** 10 2023-04-25 12:19 24 ***** 11 2023-04-25 12:20 25 ****** ... ..( 2 skipped). .. ****** 14 2023-04-25 12:23 25 ****** 15 2023-04-25 12:24 24 ***** ... ..( 9 skipped). .. ***** 25 2023-04-25 12:34 24 ***** 26 2023-04-25 12:35 ? - 27 2023-04-25 12:36 23 **** 28 2023-04-25 12:37 23 **** 29 2023-04-25 12:38 23 **** 30 2023-04-25 12:39 24 ***** ... ..( 85 skipped). .. ***** 116 2023-04-25 14:05 24 ***** 117 2023-04-25 14:06 ? - 118 2023-04-25 14:07 23 **** 119 2023-04-25 14:08 23 **** 120 2023-04-25 14:09 24 ***** ... ..( 6 skipped). .. ***** 127 2023-04-25 14:16 24 ***** 128 2023-04-25 14:17 ? - 129 2023-04-25 14:18 24 ***** ... ..( 37 skipped). .. ***** 167 2023-04-25 14:56 24 ***** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 197 --- Lifetime Power-On Resets 0x01 0x018 6 220724098241 --- Logical Sectors Written 0x01 0x020 6 5454270 --- Number of Write Commands 0x01 0x028 6 505537549186 --- Logical Sectors Read 0x01 0x030 6 4444867 --- Number of Read Commands 0x01 0x038 6 2117010972 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 24 --- Current Temperature 0x05 0x010 1 24 --- Average Short Term Temperature 0x05 0x018 1 - --- Average Long Term Temperature 0x05 0x020 1 33 --- Highest Temperature 0x05 0x028 1 21 --- Lowest Temperature 0x05 0x030 1 28 --- Highest Average Short Term Temperature 0x05 0x038 1 22 --- Lowest Average Short Term Temperature 0x05 0x040 1 - --- Highest Average Long Term Temperature 0x05 0x048 1 - --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 954 --- Number of Hardware Resets 0x06 0x010 4 286 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 3 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS
 
Propaganda said:
I have an HP branded Intel s3710 which shows "N/A" for the wearout indicator. Smartctl says it has 3% wear; "3 --- Percentage Used Endurance Indicator".
Click to expand...
That's not the usual place where to look for that. Maybe the device is too new and you have to wait for an update of smartctl. The version in your PVE is 2,5 years old.
 
Not sure about the HP rebranded ones, but the stock Intel ones are EoL for 6 years. I would guess they are just too exotic, that no one actually cared about adding them to the smartctl DB. The stock ones got way different SMART attributes. for example one of my stock S3710 200GB:

Code: 
=== START OF INFORMATION SECTION ===
Model Family:     Intel 730 and DC S35x0/3610/3700 Series SSDs
Device Model:     INTEL SSDSC2BA200G4
Firmware Version: G2010170

SMART Attributes Data Structure revision number: 16403
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  5 Reallocated_Sector_Ct   -O--CK   100   100   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    35330
 12 Power_Cycle_Count       -O--CK   100   100   000    -    523
170 Available_Reservd_Space PO--CK   100   100   010    -    0
171 Program_Fail_Count      -O--CK   100   100   000    -    0
172 Erase_Fail_Count        -O--CK   100   100   000    -    0
174 Unsafe_Shutdown_Count   -O--CK   100   100   000    -    32
175 Power_Loss_Cap_Test     PO--CK   100   100   010    -    5030 (184 9272)
183 SATA_Downshift_Count    -O--CK   100   100   000    -    0
184 End-to-End_Error        PO--CK   100   100   090    -    0
187 Reported_Uncorrect      -O--CK   100   100   000    -    0
190 Temperature_Case        -O---K   070   063   000    -    30 (Min/Max 28/38)
192 Unsafe_Shutdown_Count   -O--CK   100   100   000    -    32
194 Temperature_Internal    -O---K   100   100   000    -    30
197 Current_Pending_Sector  -O--C-   100   100   000    -    0
199 CRC_Error_Count         -OSRCK   100   100   000    -    0
225 Host_Writes_32MiB       -O--CK   100   100   000    -    1077401
226 Workld_Media_Wear_Indic -O--CK   100   100   000    -    65535
227 Workld_Host_Reads_Perc  -O--CK   100   100   000    -    65535
228 Workload_Minutes        -O--CK   100   100   000    -    65535
232 Available_Reservd_Space PO--CK   100   100   010    -    0
233 Media_Wearout_Indicator -O--CK   099   099   000    -    0
234 Thermal_Throttle        -O--CK   100   100   000    -    0/0
241 Host_Writes_32MiB       -O--CK   100   100   000    -    1077401
242 Host_Reads_32MiB        -O--CK   100   100   000    -    268611
243 NAND_Writes_32MiB       -O--CK   100   100   000    -    2301092
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning
 
Last edited:
flames said:
@Propaganda do you also have the HPE backplane? Try the solution from here https://forum.proxmox.com/threads/issues-with-hp-p420i-and-smart.79669/
Wrapper-Scripts on the second page
Click to expand...
No I don't and the smart status works and shows passed and all the smart vales show correctlywhen double clicking the gui. It is just that wearout is not in the smart attributes area it is in the device statistics area. It doesn’t appear that proxmox is checking this location for wearout information.

I don't know if a script like that would work but I can try later on. It would only work if the promox gui parses this section of the smartctl output. Those scripts just call the device with a different modifier to get the smart attributes outputting. It changes nothing about the device statistics.

I guess I could make something that calls smartctl but intercepts it's output and outputs a fake status. This would trick proxmox into thinking the wearout is in a typical location it can parse.

I was hoping the proxmox team could add a change to the parsing script if it doesn't see a wearout in the typical location they would check the device statistics area. The data is there in smartctl's output just not in the typical location.

This might not be the only drive that displays wearout in this atypical way.
 
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom