Solved - unable to load disks after changing sata ports

mihaib

New Member
Oct 10, 2024
29
3
3
Amsterdam
Hi all,
I run proxmox 8.4.14
Long story short: I moved all TrueNAS disks behind a HBA and I left on the motherboard only 3 drives: the boot disk, the one mapped to /mnt/pve/Apps and /mnt/pve/Images.
Both disks have been moved to another sata port.
Now, i don't remember where they where before :(

blkid
/dev/mapper/pve-root: UUID="5e7366ca-1c16-4170-8db8-fbc95bdffdf8" BLOCK_SIZE="4096" TYPE="ext4"
/dev/mapper/pve-vm--101--disk--0: UUID="b42e6a0d-63d2-4532-a11a-dbb0647e83fd" BLOCK_SIZE="4096" TYPE="ext4"
/dev/sdg3: UUID="iDkLf2-jHoN-N2bk-GlQN-zAQx-AN6p-HdSdlH" TYPE="LVM2_member" PARTUUID="7e44d51a-05d1-4aa7-97d7-b3fe690618c4"
/dev/sdg2: UUID="BD14-1506" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="2b45e530-370f-4daf-b476-e4fdc66b8589"

/dev/mapper/pve-swap: UUID="87f11bf3-53d1-4766-aab8-fdbaa337f339" TYPE="swap"
/dev/sdg1: PARTUUID="0abc4a42-392f-4d75-90b0-96f6a92cef2e"

The problem is that I cannot load them to start all other LXCs
cat /etc/pve/storage.cfg
dir: local
path /var/lib/vz
content vztmpl
shared 0

lvmthin: local-lvm
thinpool data
vgname pve
content images,rootdir

dir: Images
path /mnt/pve/Images
content vztmpl,backup,iso,images,snippets
is_mountpoint 1
nodes bespin

dir: Apps
path /mnt/pve/Apps
content iso,rootdir,images,vztmpl
is_mountpoint 1
nodes bespin

In the UI I can remove them but I fear I will lose everything. Any advice?

1769967165125.png
and here I have new UIDs:
root@bespin:/dev/disk/by-uuid# ls -la
total 0
drwxr-xr-x 2 root root 120 Feb 1 18:13 .
drwxr-xr-x 7 root root 140 Feb 1 18:13 ..
lrwxrwxrwx 1 root root 10 Feb 1 18:08 5e7366ca-1c16-4170-8db8-fbc95bdffdf8 -> ../../dm-1
lrwxrwxrwx 1 root root 10 Feb 1 18:08 87f11bf3-53d1-4766-aab8-fdbaa337f339 -> ../../dm-0
lrwxrwxrwx 1 root root 10 Feb 1 18:08 b42e6a0d-63d2-4532-a11a-dbb0647e83fd -> ../../dm-6
lrwxrwxrwx 1 root root 10 Feb 1 18:08 BD14-1506 -> ../../sdg2


Thank you
 
Last edited: