Smart passed but error pending ?

F

frankz

Active Member
Nov 16, 2020
364
24
38
Hello everyone, I noticed that every now and then there are some email messages related to an error on the sector by Smart daemon. The test, however, shows me the opposite that the smart state is Ok!
 

Attachments

  • 22.png
    22.png
    52.3 KB · Views: 11
  • 32.png
    32.png
    114.5 KB · Views: 11
whats the output of
Code: 
smartctl -a /dev/sda
?

the 'PASSED' state is what smarctl gives for the state, it does not necessarily mean everythings ok with all attributes
 
dcsapak said:
whats the output of
Code: 
smartctl -a /dev/sda
?

the 'PASSED' state is what smarctl gives for the state, it does not necessarily mean everythings ok with all attributes
Click to expand...
Code: 
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0032   100   100   050    Old_age   Always       -       0
  5 Reallocated_Sector_Ct   0x0032   100   100   050    Old_age   Always       -       1
  9 Power_On_Hours          0x0032   100   100   050    Old_age   Always       -       16337
 12 Power_Cycle_Count       0x0032   100   100   050    Old_age   Always       -       80
160 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       0
161 Unknown_Attribute       0x0033   100   100   050    Pre-fail  Always       -       99
163 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       48
164 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       203059
165 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       713
166 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       8
167 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       142
168 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       5050
169 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       98
175 Program_Fail_Count_Chip 0x0032   100   100   050    Old_age   Always       -       0
176 Erase_Fail_Count_Chip   0x0032   100   100   050    Old_age   Always       -       0
177 Wear_Leveling_Count     0x0032   100   100   050    Old_age   Always       -       0
178 Used_Rsvd_Blk_Cnt_Chip  0x0032   100   100   050    Old_age   Always       -       1
181 Program_Fail_Cnt_Total  0x0032   100   100   050    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   050    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   050    Old_age   Always       -       45
194 Temperature_Celsius     0x0022   100   100   050    Old_age   Always       -       40
195 Hardware_ECC_Recovered  0x0032   100   100   050    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   100   100   050    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   050    Old_age   Always       -       1
198 Offline_Uncorrectable   0x0032   100   100   050    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x0032   100   100   050    Old_age   Always       -       0
232 Available_Reservd_Space 0x0032   100   100   050    Old_age   Always       -       99
241 Total_LBAs_Written      0x0030   100   100   050    Old_age   Offline      -       254604
242 Total_LBAs_Read         0x0030   100   100   050    Old_age   Offline      -       282165
245 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       275958

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported


First of all, thank you for answering, I'll send you the report of the command you just mentioned to me
 
seems you did not post the complete output (there are many things missing)

looks ok so far (besides the one current pending sector), i'd keep an eye on the disk though, since pending sectors are usually not a good sign...
as i said 'PASSED' it was smartctl reports for the general state (should be relatively at the beginning of the 'smartctl -a' output)
 
dcsapak said:
seems you did not post the complete output (there are many things missing)

looks ok so far (besides the one current pending sector), i'd keep an eye on the disk though, since pending sectors are usually not a good sign...
as i said 'PASSED' it was smartctl reports for the general state (should be relatively at the beginning of the 'smartctl -a' output)
Click to expand...
Yes, I apologize. I didn't realize I left out the 1 part .....

Here it is:


Code: 
root@pve3:~# smartctl -a /dev/sda
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.53-1-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     SATA3 240GB SSD
Serial Number:    AA000002344460002238
Firmware Version: T0910A0
User Capacity:    240,057,409,536 bytes [240 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available, deterministic
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Sep 26 17:52:42 2022 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (  120) seconds.
Offline data collection
capabilities:              (0x11) SMART execute Offline immediate.
                    No Auto Offline data collection support.
                    Suspend Offline collection upon new
                    command.
                    No Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    No Selective Self-test supported.
SMART capabilities:            (0x0002)    Does not save SMART data before
                    entering power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (  10) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0032   100   100   050    Old_age   Always       -       0
  5 Reallocated_Sector_Ct   0x0032   100   100   050    Old_age   Always       -       1
  9 Power_On_Hours          0x0032   100   100   050    Old_age   Always       -       16393
 12 Power_Cycle_Count       0x0032   100   100   050    Old_age   Always       -       80
160 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       0
161 Unknown_Attribute       0x0033   100   100   050    Pre-fail  Always       -       99
163 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       48
164 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       203641
165 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       714
166 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       8
167 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       142
168 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       5050
169 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       98
175 Program_Fail_Count_Chip 0x0032   100   100   050    Old_age   Always       -       0
176 Erase_Fail_Count_Chip   0x0032   100   100   050    Old_age   Always       -       0
177 Wear_Leveling_Count     0x0032   100   100   050    Old_age   Always       -       0
178 Used_Rsvd_Blk_Cnt_Chip  0x0032   100   100   050    Old_age   Always       -       1
181 Program_Fail_Cnt_Total  0x0032   100   100   050    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   050    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   050    Old_age   Always       -       45
194 Temperature_Celsius     0x0022   100   100   050    Old_age   Always       -       40
195 Hardware_ECC_Recovered  0x0032   100   100   050    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   100   100   050    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   050    Old_age   Always       -       1
198 Offline_Uncorrectable   0x0032   100   100   050    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x0032   100   100   050    Old_age   Always       -       0
232 Available_Reservd_Space 0x0032   100   100   050    Old_age   Always       -       99
241 Total_LBAs_Written      0x0030   100   100   050    Old_age   Offline      -       255047
242 Total_LBAs_Read         0x0030   100   100   050    Old_age   Offline      -       285439
245 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       277032

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported

root@pve3:~#
 
dcsapak said:
seems you did not post the complete output (there are many things missing)

looks ok so far (besides the one current pending sector), i'd keep an eye on the disk though, since pending sectors are usually not a good sign...
as i said 'PASSED' it was smartctl reports for the general state (should be relatively at the beginning of the 'smartctl -a' output)
Click to expand...
Hi, have you been able to evaluate if the problem exists after listing the log in full? Thank you
 
i already said that the overall 'PASSED' value does not necessarily mean the disk is fine. and the message you got about the pending sectors is still correct:

frankz said:
197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 1
Click to expand...
(the 1 at the end means it has one 'current pending sector')

so the message is correct

i'd monitor the disk and see if it's making problems, but smart values are generally not that good in telling if the disk is working fine or broken
 
dcsapak said:
i already said that the overall 'PASSED' value does not necessarily mean the disk is fine. and the message you got about the pending sectors is still correct:


(the 1 at the end means it has one 'current pending sector')

so the message is correct

i'd monitor the disk and see if it's making problems, but smart values are generally not that good in telling if the disk is working fine or broken
Click to expand...
Thank you for your answer
 
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom