Slow live migration due to undeleted snapshot

lolo750paso

Member
Dec 10, 2019
4
0
21
57
Hi,
I have searched the forum, but nobody seems to have faced this problem. I have a small cluster with 2 nodes, on each node, VMs are on a zfs pool and replication is active.
Everything works fine, live migration is fast except for VM 500, on which snapshots were made through the GUI and later deleted. The snapshots were deleted without errors, they are not visible in the GUI but with a shell:

Code:
root@remus:~# zfs list
NAME                                          USED  AVAIL     REFER  MOUNTPOINT
rpool                                         264G   166G       96K  /rpool
rpool/ROOT                                   7.05G   166G       96K  /rpool/ROOT
rpool/ROOT/pve-1                             7.05G   166G     7.05G  /
rpool/data                                    257G   166G       96K  /rpool/data
rpool/data/vm-500-disk-0                     24.5G   166G     24.5G  -
rpool/data/vm-500-state-Avant_reverse_proxy  2.41G   166G     2.41G  -
rpool/data/vm-500-state-maj_solstice         2.58G   166G     2.58G  -
rpool/data/vm-501-disk-0                     15.0G   166G     15.0G  -
rpool/data/vm-501-disk-1                      151G   166G      151G  -
rpool/data/vm-502-disk-0                     23.5G   166G     23.5G  -
rpool/data/vm-503-disk-0                     12.7G   166G     12.7G  -
rpool/data/vm-504-disk-0                     14.6G   166G     14.6G  -
rpool/data/vm-505-disk-0                     10.6G   166G     10.6G  -

For each migration of the VM-500, the 2 snapshots are also moved to the other node:

Code:
2022-08-31 18:51:50 starting migration of VM 500 to node 'remus' (192.168.1.199)
2022-08-31 18:51:50 found local, replicated disk 'local-zfs:vm-500-disk-0' (in current VM config)
2022-08-31 18:51:50 found local disk 'local-zfs:vm-500-state-Avant_reverse_proxy' (via storage)
2022-08-31 18:51:50 found local disk 'local-zfs:vm-500-state-maj_solstice' (via storage)
2022-08-31 18:51:50 scsi0: start tracking writes using block-dirty-bitmap 'repl_scsi0'
2022-08-31 18:51:50 replicating disk images
2022-08-31 18:51:50 start replication job
2022-08-31 18:51:50 guest => VM 500, running => 4047041
2022-08-31 18:51:50 volumes => local-zfs:vm-500-disk-0
2022-08-31 18:51:51 freeze guest filesystem
2022-08-31 18:51:51 create snapshot '__replicate_500-0_1661964710__' on local-zfs:vm-500-disk-0
2022-08-31 18:51:51 thaw guest filesystem
2022-08-31 18:51:51 using secure transmission, rate limit: none
2022-08-31 18:51:51 incremental sync 'local-zfs:vm-500-disk-0' (__replicate_500-0_1661963411__ => __replicate_500-0_1661964710__)
2022-08-31 18:51:52 send from @__replicate_500-0_1661963411__ to rpool/data/vm-500-disk-0@__replicate_500-0_1661964710__ estimated size is 27.0M
2022-08-31 18:51:52 total estimated size is 27.0M
2022-08-31 18:51:53 successfully imported 'local-zfs:vm-500-disk-0'
2022-08-31 18:51:53 delete previous replication snapshot '__replicate_500-0_1661963411__' on local-zfs:vm-500-disk-0
2022-08-31 18:51:53 (remote_finalize_local_job) delete stale replication snapshot '__replicate_500-0_1661963411__' on local-zfs:vm-500-disk-0
2022-08-31 18:51:53 end replication job
2022-08-31 18:51:53 copying local disk images
2022-08-31 18:51:55 full send of rpool/data/vm-500-state-Avant_reverse_proxy@__replicate_500-0_1649678400__ estimated size is 3.77G
2022-08-31 18:51:55 send from @__replicate_500-0_1649678400__ to rpool/data/vm-500-state-Avant_reverse_proxy@__migration__ estimated size is 624B
2022-08-31 18:51:55 total estimated size is 3.77G
2022-08-31 18:51:56 TIME        SENT   SNAPSHOT rpool/data/vm-500-state-Avant_reverse_proxy@__replicate_500-0_1649678400__
2022-08-31 18:51:56 18:51:56    106M   rpool/data/vm-500-state-Avant_reverse_proxy@__replicate_500-0_1649678400__
........................................cut.................................;
2022-08-31 18:52:29 18:52:29   3.70G   rpool/data/vm-500-state-Avant_reverse_proxy@__replicate_500-0_1649678400__
2022-08-31 18:52:30 successfully imported 'local-zfs:vm-500-state-Avant_reverse_proxy'
2022-08-31 18:52:30 volume 'local-zfs:vm-500-state-Avant_reverse_proxy' is 'local-zfs:vm-500-state-Avant_reverse_proxy' on the target
2022-08-31 18:52:31 full send of rpool/data/vm-500-state-maj_solstice@__replicate_500-0_1661961600__ estimated size is 3.85G
2022-08-31 18:52:31 send from @__replicate_500-0_1661961600__ to rpool/data/vm-500-state-maj_solstice@__migration__ estimated size is 624B
2022-08-31 18:52:31 total estimated size is 3.85G
2022-08-31 18:52:32 TIME        SENT   SNAPSHOT rpool/data/vm-500-state-maj_solstice@__replicate_500-0_1661961600__
2022-08-31 18:52:32 18:52:32    105M   rpool/data/vm-500-state-maj_solstice@__replicate_500-0_1661961600__
........................................cut........................................
2022-08-31 18:53:06 18:53:06   3.81G   rpool/data/vm-500-state-maj_solstice@__replicate_500-0_1661961600__
2022-08-31 18:53:08 successfully imported 'local-zfs:vm-500-state-maj_solstice'
2022-08-31 18:53:08 volume 'local-zfs:vm-500-state-maj_solstice' is 'local-zfs:vm-500-state-maj_solstice' on the target
2022-08-31 18:53:08 starting VM 500 on remote node 'remus'
2022-08-31 18:53:10 volume 'local-zfs:vm-500-disk-0' is 'local-zfs:vm-500-disk-0' on the target
2022-08-31 18:53:10 start remote tunnel
2022-08-31 18:53:10 ssh tunnel ver 1
2022-08-31 18:53:10 starting storage migration
2022-08-31 18:53:10 scsi0: start migration to nbd:unix:/run/qemu-server/500_nbd.migrate:exportname=drive-scsi0
drive mirror re-using dirty bitmap 'repl_scsi0'
drive mirror is starting for drive-scsi0
drive-scsi0: transferred 0.0 B of 6.4 MiB (0.00%) in 0s
drive-scsi0: transferred 6.4 MiB of 6.4 MiB (100.00%) in 1s, ready
all 'mirror' jobs are ready
2022-08-31 18:53:11 starting online/live migration on unix:/run/qemu-server/500.migrate
2022-08-31 18:53:11 set migration capabilities
2022-08-31 18:53:11 migration downtime limit: 100 ms
2022-08-31 18:53:11 migration cachesize: 512.0 MiB
2022-08-31 18:53:11 set migration parameters
2022-08-31 18:53:11 start migrate command to unix:/run/qemu-server/500.migrate
2022-08-31 18:53:12 migration active, transferred 113.3 MiB of 4.0 GiB VM-state, 113.7 MiB/s
...............................................cut...........................
2022-08-31 18:53:43 migration active, transferred 3.5 GiB of 4.0 GiB VM-state, 117.0 MiB/s
2022-08-31 18:53:44 migration active, transferred 3.6 GiB of 4.0 GiB VM-state, 121.7 MiB/s
2022-08-31 18:53:46 average migration speed: 117.5 MiB/s - downtime 98 ms
2022-08-31 18:53:46 migration status: completed
all 'mirror' jobs are ready
drive-scsi0: Completing block job_id...
drive-scsi0: Completed successfully.
drive-scsi0: mirror-job finished
2022-08-31 18:53:47 # /usr/bin/ssh -e none -o 'BatchMode=yes' -o 'HostKeyAlias=remus' root@192.168.1.199 pvesr set-state 500 \''{"local/romulus":{"last_iteration":1661964710,"last_try":1661964710,"duration":3.112224,"storeid_list":["local-zfs"],"last_node":"romulus","last_sync":1661964710,"fail_count":0}}'\'
2022-08-31 18:53:47 stopping NBD storage migration server on target.
2022-08-31 18:53:52 migration finished successfully (duration 00:02:02)
TASK OK

My question is: can I safely remove these snapshots? If yes, what is the safest way?

Laurent LESTRADE
 
of course, u can delete snapshots. use the normel console for it - there is no other way.
 
Hi,
usually there will be an error if removing the state file fails. In the UI, could go to the Task History panel of the node where the VM originally was and filter by CT/VM ID: 500 and Task Type: qmdelsnapshot. Then please check if anything was printed in the logs by double clicking on each task. Please also share the output of pveversion -v.
 
Hi,
in the task history, no error (please see the attached screen capture):
Capture d’écran 2022-10-05 à 14.46.45.png

This pve was updated from 5 to 6 then to 7, could it be related to a zfs problem?
Capture d’écran 2022-10-05 à 14.57.21.png

Code:
root@remus:~# pveversion -v
proxmox-ve: 7.2-1 (running kernel: 5.15.60-1-pve)
pve-manager: 7.2-11 (running version: 7.2-11/b76d3178)
pve-kernel-helper: 7.2-12
pve-kernel-5.15: 7.2-11
pve-kernel-5.13: 7.1-9
pve-kernel-5.4: 6.4-13
pve-kernel-5.15.60-1-pve: 5.15.60-1
pve-kernel-5.15.53-1-pve: 5.15.53-1
pve-kernel-5.15.39-4-pve: 5.15.39-4
pve-kernel-5.13.19-6-pve: 5.13.19-15
pve-kernel-5.4.166-1-pve: 5.4.166-1
pve-kernel-5.4.34-1-pve: 5.4.34-2
ceph-fuse: 14.2.21-1
corosync: 3.1.5-pve2
criu: 3.15-1+pve-1
glusterfs-client: 9.2-1
ifupdown: residual config
ifupdown2: 3.1.0-1+pmx3
ksm-control-daemon: 1.4-1
libjs-extjs: 7.0.0-1
libknet1: 1.24-pve1
libproxmox-acme-perl: 1.4.2
libproxmox-backup-qemu0: 1.3.1-1
libpve-access-control: 7.2-4
libpve-apiclient-perl: 3.2-1
libpve-common-perl: 7.2-2
libpve-guest-common-perl: 4.1-2
libpve-http-server-perl: 4.1-3
libpve-storage-perl: 7.2-9
libqb0: 1.0.5-1
libspice-server1: 0.14.3-2.1
lvm2: 2.03.11-2.1
lxc-pve: 5.0.0-3
lxcfs: 4.0.12-pve1
novnc-pve: 1.3.0-3
proxmox-backup-client: 2.2.6-1
proxmox-backup-file-restore: 2.2.6-1
proxmox-mini-journalreader: 1.3-1
proxmox-widget-toolkit: 3.5.1
pve-cluster: 7.2-2
pve-container: 4.2-2
pve-docs: 7.2-2
pve-edk2-firmware: 3.20220526-1
pve-firewall: 4.2-6
pve-firmware: 3.5-3
pve-ha-manager: 3.4.0
pve-i18n: 2.7-2
pve-qemu-kvm: 7.0.0-3
pve-xtermjs: 4.16.0-1
qemu-server: 7.2-4
smartmontools: 7.2-pve3
spiceterm: 3.2-2
swtpm: 0.7.1~bpo11+1
vncterm: 1.7-1
zfsutils-linux: 2.1.5-pve1

Thanks,


Laurent
 
Hi,
in the task history, no error (please see the attached screen capture):
View attachment 41937
Is there any output for the task?

There was a recent improvement for cleaning up stale volumes, that might've prevented this. Did you ever migrate after deleting a snapshot, but before the replication had a chance to run? Without the improvement that could lead to left-over volumes on the target node.

This pve was updated from 5 to 6 then to 7, could it be related to a zfs problem?
View attachment 41938
See this thread for more information and to see if you can upgrade safely. It's not required though and in any case, I recommend having restore-tested backups before attempting the upgrade!
 
Is there any output for the task?
no, only this:
Capture d’écran 2022-10-06 à 09.37.35.png
There was a recent improvement for cleaning up stale volumes, that might've prevented this. Did you ever migrate after deleting a snapshot, but before the replication had a chance to run?
I don't know, I don't remember, but it is possible. I have just made a test, create a snapshot, wait for replication, then delete it. It works great, on the replicated node, after a while, snapshot was also deleted.
Without the improvement that could lead to left-over volumes on the target node.


See this thread for more information and to see if you can upgrade safely. It's not required though and in any case, I recommend having restore-tested backups before attempting the upgrade!
Ok, thanks a lot for your help!
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!