SFP+ network card

[saulllynasp]

Hello,

I bought Edimax SFP+ network card and inserted into PCIe x4 slot and now I have 3 network cards installed (2x1Gbps and 1xSFP+). Unfortunately proxmox didn't detected it automatically and in proxmox GUI I can only see 1Gbps cards.
Using the command (lspci -k | sed -n '/Ethernet/,/driver in use/p') I get:
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V
Subsystem: ASUSTeK Computer Inc. Ethernet Connection (2) I219-V
Kernel driver in use: e1000e
02:00.0 Ethernet controller: Tehuti Networks Ltd. TN9310 10GbE SFP+ Ethernet Adapter
Subsystem: Edimax Computer Co. EN-8102PF 10GbE SPF+ Ethernet Adapter
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Kernel driver in use: r8169
So, it is visible by the system. But how should I configure it in order to use?

Thanks!

 

[hec]

There is no driver for this card. I would use a standard card like Intel or something else.

Maybe you can find some drivers a compile them.

 

[Arvyr]

Yeah, you either compile the driver yourself or you buy a supported NIC like Intels X500er series or so

 

[saulllynasp]

Hey, thanks. I don't have an experience compiling drivers.. And yes, using Intel everything works.
Thank You!

 

[LnxBil]

02:00.0 Ethernet controller: Tehuti Networks Ltd. TN9310 10GbE SFP+ Ethernet Adapter
Subsystem: Edimax Computer Co. EN-8102PF 10GbE SPF+ Ethernet Adapter

Wow, never heard of that vendor before.

And yes, using Intel everything works.

Even if it is more expensive, you save a lot of trouble with these cards.