Hi all
Here the config
· 2 Servers installed with Proxmox 4.4 as SA and SB
· On each server, there are 2 logical partition (20Go as PA and 500Go as PB)
· Proxmox is installed on PA
· With the tuto from the wiki, I’ve installed DRDB9 on PB
· The 2 servers are in a cluster
Everything is OK, I’ve build a VM with Windows 7 image on DRDB on SA and the image is well replicated on SB.
I can move my VM between the servers so Cluster is OK
BUT I don’t think I've well understand….
When I’m running the VM on SA, and I shutdown SA, my Windows ends…..so I can't migrate anything...
I thought SB will take relay because the image is present on SB (with DRDB) but no…..
To do this, I’ve made a trick and even if it works, can you tell me if it’s OK because Proxmox can’t do this natively, I’ve to edit conf file:
· I’ve made an identical VM config on SB
· I’ve copy the content of 100.conf on SA to 101.conf on SB
So now, each VM use the same image disk (wich is in DRDB) and if the SA if off, I can use the VM on SB with same data (because of DRDB)
My goal is to have always a server wich can run a VM with same data (and I'don't have any SAN or network storage)
Is it good ?
THanks
Here the config
· 2 Servers installed with Proxmox 4.4 as SA and SB
· On each server, there are 2 logical partition (20Go as PA and 500Go as PB)
· Proxmox is installed on PA
· With the tuto from the wiki, I’ve installed DRDB9 on PB
· The 2 servers are in a cluster
Everything is OK, I’ve build a VM with Windows 7 image on DRDB on SA and the image is well replicated on SB.
I can move my VM between the servers so Cluster is OK
BUT I don’t think I've well understand….
When I’m running the VM on SA, and I shutdown SA, my Windows ends…..so I can't migrate anything...
I thought SB will take relay because the image is present on SB (with DRDB) but no…..
To do this, I’ve made a trick and even if it works, can you tell me if it’s OK because Proxmox can’t do this natively, I’ve to edit conf file:
· I’ve made an identical VM config on SB
· I’ve copy the content of 100.conf on SA to 101.conf on SB
So now, each VM use the same image disk (wich is in DRDB) and if the SA if off, I can use the VM on SB with same data (because of DRDB)
My goal is to have always a server wich can run a VM with same data (and I'don't have any SAN or network storage)
Is it good ?
THanks