Hi,
I purchased a second IP for my dedicated and would like to route web trafic through it. So far I can ping the second IP but cannot get to Caddy reverse proxy. I would like all VM and CT to be masquerated as IP_1 currently but Caddy CT should be on IP_2 both way.
Thanks.
Or should I forgo all of this and install a OPNSense VM to route all trafic? I afraid it might increase respond time too much.
I purchased a second IP for my dedicated and would like to route web trafic through it. So far I can ping the second IP but cannot get to Caddy reverse proxy. I would like all VM and CT to be masquerated as IP_1 currently but Caddy CT should be on IP_2 both way.
Thanks.
Code:
auto lo
iface lo inet loopback
auto enp36s0f0
iface enp36s0f0 inet static
address <IP_2>/24
gateway <GWv4>
auto enp36s0f0:0
iface enp36s0f0:0 inet static
address <IP_2>/24
iface enp36s0f0 inet6 static
address <IPv6>/64
gateway <GWv6>
iface enx7640bbc96cdf inet manual
iface enp36s0f1 inet manual
auto vmbr0
iface vmbr0 inet static
address 10.0.1.1
netmask 255.255.255.0
bridge-ports none
bridge-stp off
bridge-fd 0
post-up echo 1 > /proc/sys/net/ipv4/ip_forward
post-up iptables -t nat -A POSTROUTING -o enp36s0f0 -j MASQUERADE
post-up iptables -t nat -A PREROUTING -d <IP_1> -p tcp --dport 80 -j DNAT --to <Nextcloud>:80
post-up iptables -t nat -A PREROUTING -d <IP_1> -p tcp --dport 443 -j DNAT --to <Nextcloud>:443
post-up iptables -t nat -A PREROUTING -d <IP_1> -p tcp --dport 3478 -j DNAT --to <Nextcloud>:3478
post-up iptables -t nat -A PREROUTING -d <IP_1> -p udp --dport 3478 -j DNAT --to <Nextcloud>:3478
post-up iptables -t nat -A PREROUTING -d <IP_2> -p tcp --dport 80 -j DNAT --to <Caddy>:80
post-up iptables -t nat -A PREROUTING -d <IP_2> -p tcp --dport 443 -j DNAT --to <Caddy>:443
Or should I forgo all of this and install a OPNSense VM to route all trafic? I afraid it might increase respond time too much.