Restore LTO-8 Failure EOT different dns-zone

[celtar]

Hi,

Hardware/Server: Supermicro, AMD 7313. 256-GB, SSD with extra external HBA SAS Controller and Tandberg Autoloader (SAS, actual Firmeware 381).

1. Backup LTO-8 Job (approx. 3.3 TB Data) around 9 Hours (a little bit slow with 70 MB/s) ok
2. Restore Job from LTO-8 Tape Owner same as backup admin@pbs) an different DNS store (backup_restore) for TESTING Restore

Failure after 1 Hour
...
2023-02-08T09:19:54+01:00: File 605: chunk archive for datastore 'backupzfsr1'
2023-02-08T09:20:09+01:00: restored 0 B (0 B/s)
2023-02-08T09:20:09+01:00: register 1095 chunks
2023-02-08T09:20:09+01:00: File 606: chunk archive for datastore 'backupzfsr1'
2023-02-08T09:20:14+01:00: restored 0 B (0 B/s)
2023-02-08T09:20:14+01:00: register 532 chunks
2023-02-08T09:20:14+01:00: File 607: snapshot archive backupzfsr1:ns/longtermbackup/host/ms-bks01/2022-11-11T15:23:28Z
2023-02-08T09:20:16+01:00: File 608: skip catalog '668bc3fa-6cb5-455c-8203-6a15c13705c7'
2023-02-08T09:20:16+01:00: detected EOT after 609 files
2023-02-08T09:20:16+01:00: Restore mediaset 'ee3bcd99-3464-4e49-9828-a0b3c9492361' done
2023-02-08T09:20:16+01:00: TASK OK

Any Idea ?
Thanks and best regards
John Celtar

 

[dcsapak]

HI,

first you've written in the german forum for pbs, but wrote your post in english. Please either post in german here, or post in the correct subforum (i can move the thread if you want).
so first in english:

this is not an error, just that pbs detected the end of tape, are you sure it did not correctly restore it?

und auf deutsch:
das ist kein fehler, pbs hat einfach das ende des tapes erkannt. Sicher das es nicht korrekt restored wurde?

 

[mow]

Das "restored 0 B" spricht schon dafür, daß da etwas nicht korrekt ist.

 

[dcsapak]

Das "restored 0 B" spricht schon dafür, daß da etwas nicht korrekt ist.

nein das heißt nur dass die chunks schon am datastore waren,

EDIT: hier lassen sich die log meldungen natürlich verbessern, sodass es klarer ist was hier passiert