Hi,
I am new to Proxmox and LVS, and I hope someone will be able to help.
I run out of space, see below.
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 111.8G 0 disk
├─sda1 8:1 0 1007K 0 part
├─sda2 8:2 0 512M 0 part /boot/efi
└─sda3 8:3 0 111.3G 0 part
├─pve-swap 253:0 0 7G 0 lvm [SWAP]
├─pve-root 253:1 0 27.8G 0 lvm /
├─pve-data_tmeta 253:2 0 1G 0 lvm
│ └─pve-data-tpool 253:4 0 60.7G 0 lvm
│ ├─pve-data 253:5 0 60.7G 0 lvm
│ ├─pve-vm--100--disk--0 253:6 0 32G 0 lvm
│ ├─pve-vm--101--disk--0 253:7 0 32G 0 lvm
│ └─pve-vm--102--disk--0 253:8 0 32G 0 lvm
└─pve-data_tdata 253:3 0 60.7G 0 lvm
└─pve-data-tpool 253:4 0 60.7G 0 lvm
├─pve-data 253:5 0 60.7G 0 lvm
├─pve-vm--100--disk--0 253:6 0 32G 0 lvm
├─pve-vm--101--disk--0 253:7 0 32G 0 lvm
└─pve-vm--102--disk--0 253:8 0 32G 0 lvm
root@pve:~# pvs
PV VG Fmt Attr PSize PFree
/dev/sda3 pve lvm2 a-- <111.29g 13.87g
root@pve:~# vgs
VG #PV #LV #SN Attr VSize VFree
pve 1 6 0 wz--n- <111.29g 13.87g
root@pve:~# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
data pve twi-aotz-- 60.66g 82.31 3.93
root pve -wi-ao---- 27.75g
swap pve -wi-ao---- 7.00g
vm-100-disk-0 pve Vwi-aotz-- 32.00g data 33.53
vm-101-disk-0 pve Vwi-aotz-- 32.00g data 95.35
vm-102-disk-0 pve Vwi-aotz-- 32.00g data 27.16
I am not really familiar with LVS yet but I understand, new 3 VMs are virtually allocated 32Gb and only use 60.7G.
I also understand 13.87Gb are available to resize any of these volumes, right ?
Now, I added a new disk (recognized as /dev/sda and the former disk where Proxmox is installed on /dev/sdb):
![1587898844904.png 1587898844904.png](https://forum.proxmox.com/data/attachments/16/16421-6e680f9ee9b5920cb464e1c207b900d0.jpg)
![1587898750381.png 1587898750381.png](https://forum.proxmox.com/data/attachments/16/16420-9693d9626f203606b5127d82282547fa.jpg)
Can I extend my "local-lvm" storage with the new disk space ?
![1587898926479.png 1587898926479.png](https://forum.proxmox.com/data/attachments/16/16422-c0719ba22c1a1131ba8e53cd4f9ddf16.jpg)
Thanks, and stay safe
++
I am new to Proxmox and LVS, and I hope someone will be able to help.
I run out of space, see below.
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 111.8G 0 disk
├─sda1 8:1 0 1007K 0 part
├─sda2 8:2 0 512M 0 part /boot/efi
└─sda3 8:3 0 111.3G 0 part
├─pve-swap 253:0 0 7G 0 lvm [SWAP]
├─pve-root 253:1 0 27.8G 0 lvm /
├─pve-data_tmeta 253:2 0 1G 0 lvm
│ └─pve-data-tpool 253:4 0 60.7G 0 lvm
│ ├─pve-data 253:5 0 60.7G 0 lvm
│ ├─pve-vm--100--disk--0 253:6 0 32G 0 lvm
│ ├─pve-vm--101--disk--0 253:7 0 32G 0 lvm
│ └─pve-vm--102--disk--0 253:8 0 32G 0 lvm
└─pve-data_tdata 253:3 0 60.7G 0 lvm
└─pve-data-tpool 253:4 0 60.7G 0 lvm
├─pve-data 253:5 0 60.7G 0 lvm
├─pve-vm--100--disk--0 253:6 0 32G 0 lvm
├─pve-vm--101--disk--0 253:7 0 32G 0 lvm
└─pve-vm--102--disk--0 253:8 0 32G 0 lvm
root@pve:~# pvs
PV VG Fmt Attr PSize PFree
/dev/sda3 pve lvm2 a-- <111.29g 13.87g
root@pve:~# vgs
VG #PV #LV #SN Attr VSize VFree
pve 1 6 0 wz--n- <111.29g 13.87g
root@pve:~# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
data pve twi-aotz-- 60.66g 82.31 3.93
root pve -wi-ao---- 27.75g
swap pve -wi-ao---- 7.00g
vm-100-disk-0 pve Vwi-aotz-- 32.00g data 33.53
vm-101-disk-0 pve Vwi-aotz-- 32.00g data 95.35
vm-102-disk-0 pve Vwi-aotz-- 32.00g data 27.16
I am not really familiar with LVS yet but I understand, new 3 VMs are virtually allocated 32Gb and only use 60.7G.
I also understand 13.87Gb are available to resize any of these volumes, right ?
Now, I added a new disk (recognized as /dev/sda and the former disk where Proxmox is installed on /dev/sdb):
![1587898844904.png 1587898844904.png](https://forum.proxmox.com/data/attachments/16/16421-6e680f9ee9b5920cb464e1c207b900d0.jpg)
![1587898750381.png 1587898750381.png](https://forum.proxmox.com/data/attachments/16/16420-9693d9626f203606b5127d82282547fa.jpg)
Can I extend my "local-lvm" storage with the new disk space ?
![1587898926479.png 1587898926479.png](https://forum.proxmox.com/data/attachments/16/16422-c0719ba22c1a1131ba8e53cd4f9ddf16.jpg)
Thanks, and stay safe
++
Last edited: