[SOLVED] Reboots every times

[sechanbask]

Hello?

I have a HP ML350 G5 server. I have PROXMOX 3.4 installed on it. It worked lovely on it for 2 years.

Now, I just have installed "Proxmox Virtual Environment 4.2-2/725d76f0" but, I server reboots very often without I ask it.

Were can I found the explaination why ?

my cpuinfo :

processor    : 0
vendor_id    : GenuineIntel
cpu family    : 6
model        : 23
model name    : Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz
stepping    : 10
microcode    : 0xa07
cpu MHz        : 2500.270
cache size    : 6144 KB
physical id    : 0
siblings    : 4
core id        : 0
cpu cores    : 4
apicid        : 0
initial apicid    : 0
fpu        : yes
fpu_exception    : yes
cpuid level    : 13
wp        : yes
flags        : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm tpr_shadow vnmi flexpriority dtherm
bugs        :
bogomips    : 5000.54
clflush size    : 64
cache_alignment    : 64
address sizes    : 38 bits physical, 48 bits virtual
power management:

processor    : 1
vendor_id    : GenuineIntel
cpu family    : 6
model        : 23
model name    : Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz
stepping    : 10
microcode    : 0xa07
cpu MHz        : 2500.270
cache size    : 6144 KB
physical id    : 0
siblings    : 4
core id        : 2
cpu cores    : 4
apicid        : 2
initial apicid    : 2
fpu        : yes
fpu_exception    : yes
cpuid level    : 13
wp        : yes
flags        : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm tpr_shadow vnmi flexpriority dtherm
bugs        :
bogomips    : 5000.54
clflush size    : 64
cache_alignment    : 64
address sizes    : 38 bits physical, 48 bits virtual
power management:

processor    : 2
vendor_id    : GenuineIntel
cpu family    : 6
model        : 23
model name    : Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz
stepping    : 10
microcode    : 0xa07
cpu MHz        : 2500.270
cache size    : 6144 KB
physical id    : 0
siblings    : 4
core id        : 1
cpu cores    : 4
apicid        : 1
initial apicid    : 1
fpu        : yes
fpu_exception    : yes
cpuid level    : 13
wp        : yes
flags        : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm tpr_shadow vnmi flexpriority dtherm
bugs        :
bogomips    : 5000.54
clflush size    : 64
cache_alignment    : 64
address sizes    : 38 bits physical, 48 bits virtual
power management:

processor    : 3
vendor_id    : GenuineIntel
cpu family    : 6
model        : 23
model name    : Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz
stepping    : 10
microcode    : 0xa07
cpu MHz        : 2500.270
cache size    : 6144 KB
physical id    : 0
siblings    : 4
core id        : 3
cpu cores    : 4
apicid        : 3
initial apicid    : 3
fpu        : yes
fpu_exception    : yes
cpuid level    : 13
wp        : yes
flags        : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm tpr_shadow vnmi flexpriority dtherm
bugs        :
bogomips    : 5000.54
clflush size    : 64
cache_alignment    : 64
address sizes    : 38 bits physical, 48 bits virtual
power management:

 

[tom]

First, I suggest you upgrade to latest version, currently 4.3.

http://pve.proxmox.com/wiki/Downloads#Update_a_running_Proxmox_Virtual_Environment_4.x_to_latest_4.3

Then the your syslogs.

 

[sechanbask]

done, I will check the uptime the next days...

 

[sechanbask]

with the last update (

# pveversion
pve-manager/4.3-10/7230e60f (running kernel: 4.4.21-1-pve))

The server reboots or halt...

my syslogs in attached file.

my pci hardware

# lspci
00:00.0 Host bridge: Intel Corporation 5000Z Chipset Memory Controller Hub (rev b1)
00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1)
00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1)
00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 4 (rev b1)
00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 (rev b1)
00:10.0 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
00:10.1 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
00:10.2 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)
00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)
00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)
00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)
00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09)
00:1d.0 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09)
00:1d.1 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09)
00:1d.2 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09)
00:1d.3 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 (rev 09)
00:1d.7 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9)
00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09)
00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller (rev 09)
01:03.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] ES1000 (rev 02)
01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 03)
01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out  Processor (rev 03)
01:04.4 USB controller: Hewlett-Packard Company Integrated Lights-Out Standard Virtual USB Controller
01:04.6 IPMI SMIC interface: Hewlett-Packard Company Integrated Lights-Out Standard KCS Interface
02:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3)
03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
04:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01)
04:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01)
05:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01)
05:01.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 (rev 01)
0f:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
0f:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
12:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev b4)
13:04.0 PCI bridge: Broadcom BCM5785 [HT1000] PCI/PCI-X Bridge (rev b2)
13:08.0 RAID bus controller: Hewlett-Packard Company Smart Array E200i (SAS Controller)

 

[fireon]

If your problem is still active, please disable every watchdog. System/BIOS/HPTools, maybe also asrd service.

 

[sechanbask]

It's a hardware problem.

My new 4 HD 1 To is to large for this server.