Read Capacity(16) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[Klaudiusz Staniek]

The dmesg is flooded by the following error messages:

[129347.410797] sd 4:0:0:2: [sde] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[129347.410802] sd 4:0:0:2: [sde] Sense Key : Illegal Request [current]
[129347.410806] sd 4:0:0:2: [sde] Add. Sense: Logical unit not supported
[129367.374281] sd 4:0:0:2: [sde] Unit Not Ready
[129367.374289] sd 4:0:0:2: [sde] Sense Key : Illegal Request [current]
[129367.374294] sd 4:0:0:2: [sde] Add. Sense: Logical unit not supported
[129367.382056] sd 4:0:0:2: [sde] Read Capacity(16) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[129367.382064] sd 4:0:0:2: [sde] Sense Key : Illegal Request [current]
[129367.382068] sd 4:0:0:2: [sde] Add. Sense: Logical unit not supported
[129367.389661] sd 4:0:0:2: [sde] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[129367.389669] sd 4:0:0:2: [sde] Sense Key : Illegal Request [current]
[129367.389673] sd 4:0:0:2: [sde] Add. Sense: Logical unit not supported
[129387.165954] sd 4:0:0:2: [sde] Unit Not Ready
[129387.165962] sd 4:0:0:2: [sde] Sense Key : Illegal Request [current]
[129387.165966] sd 4:0:0:2: [sde] Add. Sense: Logical unit not supported
[129387.174391] sd 4:0:0:2: [sde] Read Capacity(16) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[129387.174399] sd 4:0:0:2: [sde] Sense Key : Illegal Request [current]
[129387.174403] sd 4:0:0:2: [sde] Add. Sense: Logical unit not supported
[129387.182429] sd 4:0:0:2: [sde] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[129387.182436] sd 4:0:0:2: [sde] Sense Key : Illegal Request [current]
[129387.182440] sd 4:0:0:2: [sde] Add. Sense: Logical unit not supported

It happens to all my containers:

root@ugga:~# pveversion -v
proxmox-ve: 4.1-39 (running kernel: 4.2.8-1-pve)
pve-manager: 4.1-22 (running version: 4.1-22/aca130cf)
pve-kernel-4.2.8-1-pve: 4.2.8-39
lvm2: 2.02.116-pve2
corosync-pve: 2.3.5-2
libqb0: 1.0-1
pve-cluster: 4.0-36
qemu-server: 4.0-64
pve-firmware: 1.1-7
libpve-common-perl: 4.0-54
libpve-access-control: 4.0-13
libpve-storage-perl: 4.0-45
pve-libspice-server1: 0.12.5-2
vncterm: 1.2-1
pve-qemu-kvm: 2.5-9
pve-container: 1.0-52
pve-firewall: 2.0-22
pve-ha-manager: 1.0-25
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u1
lxc-pve: 1.1.5-7
lxcfs: 2.0.0-pve2
cgmanager: 0.39-pve1
criu: 1.6.0-1
zfsutils: 0.6.5-pve7~jessie
openvswitch-switch: 2.3.2-2
root@ugga:~#

 

[mir]

Looks like a failing disk. What does smart say about disk /dev/sde?

 

[Klaudiusz Staniek]

This is LVM over iSCSI. It's gone after proxmox node reboot.

 

[fips]

I have the same issue, the same message.
Have you found a solution for it?