Raidmonitor Support out of the BOX for HP smart array P410i Raid-Controller ?

[fpausp]

Is the HP P410i Raid-Controller supportet out of the BOX or must I install additional drivers/tools ?

 

[sumsum]

Works out of the Box. The HP smart array controllers are well supportet.

 

[fpausp]

OK sumsum thank you, can you please give me hint how to do this... ?

 

[sumsum]

Just install Proxmox . You dont need to install additional drivers. They are already in the Kernel.

 

[fpausp]

OK, what cli-command shows the raidstatus, or do you use a gui on windows client ?

 

[ygolonac]

http://cciss.sourceforge.net/#cciss_utils

Enviat des del meu Nexus 5 usant Tapatalk

 

[fpausp]

OK thank you.

cciss_vol_status /dev/sg0
/dev/sda: (Smart Array P410i) RAID 5 Volume 0 status: OK.


More details would be good...

 

[sumsum]

Here are some notes how to install some HP utilities : http://st2.streamhosting.ch/wp/2013/09/management-component-pack-for-proliant-hpsmh-for-wheezy/

Install hpacucli (HP Command Line Array Configuration Utility) and make yourself familiar with this tool by reading the following infromations :


http://h20565.www2.hp.com/portal/si...ac.admitted=1397304674387.876444892.492883150

 

[fpausp]

Very nice, thanks a lot...



=> ctrl all show config

Smart Array P410i in Slot 0 (Embedded) (sn: xxxxxxxxxxxxxxxxxx)

array A (SAS, Unused Space: 0 MB)


logicaldrive 1 (5.7 TB, RAID 5, OK)

physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 900.1 GB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 900.1 GB, OK)
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 900.1 GB, OK)
physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 900.1 GB, OK)
physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SAS, 900.1 GB, OK)
physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SAS, 900.1 GB, OK)
physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SAS, 900.1 GB, OK)
physicaldrive 2I:1:8 (port 2I:box 1:bay 8, SAS, 900.1 GB, OK)

SEP (Vendor ID PMCSIERA, Model SRC 8x6G) 250 (WWID: xxxxxxxxxxxxxxxxx)