RAID 5 problem. I/O Error

5

50l3r

Active Member
Jun 22, 2018
16
0
41
33
Hi guys,

I wake up and my proxmox server seems to be down.

I access with ILO and i get this output:

d8c1ff24be96ce1d8e68faaf5a058a1f.png


I cant start in normal mode. Maybe its a problem with /dev/sdb disk?
 
Last edited:
I access to my PERC H310 and i view that it doesnt recognize two RAID5 HDDs

0aba5cb6593252beb9fa3421080be6d7.png


How can its possible to break two HDDs at the same time?
 
Investigating more I have discovered that if it discovers them physically, but not in the raid5 that I had already configured:

eb2f8befa964a608a655608d39eecf37.png
 
Check each disk's SMART Health, also check to see if you RAID controller is up to date on its firmware.
 
I am very confused.

What are these drives supposed to be attached to? the Perc H310 or the HP B120i, or as JBOD? the drive show an LSI raid signature and dont appear to be damaged, just with a different controller signature. they appear to be importable by the PERC controller.
 
The problem has been that the configuration of the perc h310 was corrupted

I have not been able to recover the data. I had to rebuild the raid
 
You must log in or register to reply here.
Top Bottom