pve zed: eid=437 class=deadman

[alex.tls]

I don't know if below info is real error obtained from syslog, it is about the hard drive info used in my ZFS pool, it's just info or it means serious problem on my hard drive? it shows me "deadman" class, it sounds like terrible , do I need to replace it?

Jul  1 22:22:07 pve zed[4188]: Missed 10 events
Jul  1 22:22:07 pve zed[4188]: Bumping queue length to 2147483647
Jul  1 22:22:07 pve zed: eid=437 class=deadman pool='vmpool' vdev=ata-WDC_WD5000LPLX-08ZNTT0_WD-WX71AA86EJX3-part1 size=16384 offset=25963794432 priority=3 err=0 flags=0x180880 bookmark=517:257:0:261782
Jul  1 22:22:07 pve zed: eid=438 class=deadman pool='vmpool' vdev=ata-WDC_WD5000LPLX-08ZNTT0_WD-WX71AA86EJX3-part1 size=16384 offset=25963778048 priority=3 err=0 flags=0x180880 bookmark=517:257:0:261781
Jul  1 22:22:07 pve zed: eid=439 class=deadman pool='vmpool' vdev=ata-WDC_WD5000LPLX-08ZNTT0_WD-WX71AA86EJX3-part1 size=16384 offset=25963761664 priority=3 err=0 flags=0x180880 bookmark=517:257:0:261780
Jul  1 22:22:07 pve zed: eid=440 class=deadman pool='vmpool' vdev=ata-WDC_WD5000LPLX-08ZNTT0_WD-WX71AA86EJX3-part1 size=16384 offset=25963745280 priority=3 err=0 flags=0x180880 bookmark=517:257:0:261779
Jul  1 22:22:07 pve zed: eid=441 class=deadman pool='vmpool' vdev=ata-WDC_WD5000LPLX-08ZNTT0_WD-WX71AA86EJX3-part1 size=16384 offset=25963728896 priority=3 err=0 flags=0x180880 bookmark=517:257:0:261778
Jul  1 22:22:07 pve zed: eid=442 class=deadman pool='vmpool' vdev=ata-WDC_WD5000LPLX-08ZNTT0_WD-WX71AA86EJX3-part1 size=16384 offset=25963712512 priority=3 err=0 flags=0x180880 bookmark=517:257:0:261777
Jul  1 22:22:07 pve zed: eid=443 class=deadman pool='vmpool' vdev=ata-WDC_WD5000LPLX-08ZNTT0_WD-WX71AA86EJX3-part1 size=16384 offset=25963679744 priority=3 err=0 flags=0x380880 bookmark=517:257:0:261776
Jul  1 22:22:07 pve zed: eid=444 class=deadman pool='vmpool' vdev=ata-WDC_WD5000LPLX-08ZNTT0_WD-WX71AA86EJX3-part1 size=98304 offset=25963614208 priority=3 err=0 flags=0x40080c80 delay=2789658ms

 

[leesteken]

I don't know this error but what does the console command zpool status vmpool (on the affected Proxmox host) tell you? Did you not get any automated e-mails from zed?

 

[ledufakademy]

same error here !
and then freeze proxmox webgui or ssh ...

root@labsrv:~# zpool status rpool
  pool: rpool
 state: ONLINE
  scan: scrub repaired 0B in 00:07:09 with 0 errors on Sun Oct  9 00:31:10 2022
config:

    NAME                                                  STATE     READ WRITE CKSUM
    rpool                                                 ONLINE       0     0     0
      mirror-0                                            ONLINE       0     0     0
        ata-KINGSTON_SA400S37120G_50026B73804CA118-part3  ONLINE       0     0     0
        ata-KINGSTON_SA400S37120G_50026B778262ECA0-part3  ONLINE       0     0     0

errors: No known data errors

 

[Neobin]

same error here !
and then freeze proxmox webgui or ssh ...

root@labsrv:~# zpool status rpool
  pool: rpool
 state: ONLINE
  scan: scrub repaired 0B in 00:07:09 with 0 errors on Sun Oct  9 00:31:10 2022
config:

    NAME                                                  STATE     READ WRITE CKSUM
    rpool                                                 ONLINE       0     0     0
      mirror-0                                            ONLINE       0     0     0
        ata-KINGSTON_SA400S37120G_50026B73804CA118-part3  ONLINE       0     0     0
        ata-KINGSTON_SA400S37120G_50026B778262ECA0-part3  ONLINE       0     0     0

errors: No known data errors

https://forum.proxmox.com/threads/im-unable-to-upload-files-to-my-proxmox-server.114541/#post-508938