PVE Temperature Above 90°
- Thread starter Dexter23
- Start date
Can you check if this is an instrumentation issue? Compare with temperatures from their management interface.
Hello can you explain how can i compare the temperature?
Idk what you mean for "compare from the management interface".
Thanks.
I believe this refers to verification from the BMC (Baseboard Management Controller) installed on the server motherboard.
BMC has the capability to monitor hardware without going through the OS. On computers without BMC, one method is to measure temperatures using thermal cameras or similar devices.
If the information displayed on the OS does not match the results confirmed via BMC or thermal camera, verification of the super I/O chips is required (such as Nuvoton NCT6792D).
If they match, proceed with hardware investigation.
If the super I/O chips are not providing accurate information due to their characteristics, that is no longer a matter to be discussed in Proxmox.
Probably we'd handle it by adding modules or changing offsets, but that's not what we're discussing here.
BMC has the capability to monitor hardware without going through the OS. On computers without BMC, one method is to measure temperatures using thermal cameras or similar devices.
If the information displayed on the OS does not match the results confirmed via BMC or thermal camera, verification of the super I/O chips is required (such as Nuvoton NCT6792D).
If they match, proceed with hardware investigation.
If the super I/O chips are not providing accurate information due to their characteristics, that is no longer a matter to be discussed in Proxmox.
Code:
/etc/sensors.d/****.conf
options <module> force=1Probably we'd handle it by adding modules or changing offsets, but that's not what we're discussing here.
Last edited:
